ReferenceDesignLibrary

Refine Search

Eval Board Cell Type Configuration Voltage In Voltage Out Current Out Features Component Count + Extras Application / Target Market Design Author Sleep Mode Current [Maximum] Quiescent Current [Maximum] Quiescent Current [Typical] Sleep Mode Current [Typical]
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear All Selections Apply Filters

Designs (47)

47 Results - Page 1/5 |< < 1 2 3 4 5 > >|

STEVAL-ISB001V1: 1 Cell Charger using Discretes

Manufacturer: STMicroelectronics

This application note is a Ringing Choke Converter (RCC)-based, step-by-step cell phone battery charger design procedure.

View Design

EVAL6924D: Single Li-Ion Battery Charger

Manufacturer: STMicroelectronics

The L6924D is a fully monolithic battery charger dedicated to single-cell Li-Ion/Polymer battery packs. It is the ideal solution for space-limited applications, like PDAs, handheld equipment, cellular phones, and digital cameras. It is designed with BCD6 technology and integrates all of the power elements (the Power MOSFET, reverse blocking diode and the sense resistor) in a small VFQFPN16 3mm x …

View Design

MCP7382XEV: Li-Ion Li-Pol, Battery Charger

Manufacturer: Microchip Technology

The MCP7382X Li-Ion Battery Charger Evaluation Board features three circuits utilizing the MCP73826, MCP73827 and MCP73828 devices to demonstrate simple, stand-alone, linear charging of single cell Lithium-Ion/Lithium-Polymer battery packs (the battery packs are not included).

View Design

DC1621A: 2 Cell, 7.2V, 2A Max, LiFePO4

Manufacturer: Linear Technology/Analog Devices

Demonstration circuit 1621A features the LTM®8062, a 32V, 2A μModule® power tracking battery charger. The demonstration circuit is designed to operate from a 9.75V to 32V input source, and to charge a 2-cell battery pack to a float voltage of 7.2V.

The float voltage can easily be changed to a higher or lower voltage by adjusting the values of R2 and R3. R7 and R9 keep the converter …

View Design

DC1645A-C: 2 Cell, 8.2V, 2A Max, Li-Ion/LiPo

Manufacturer: Linear Technology/Analog Devices

Demonstration circuits 1645A-A, 1645A-B, 1645A-C and 1645A-D feature the LTM8061, a 32V, 2A μModule® Li-Ion battery charger. Operating from a 6.5V to 32V input source, the 1645A-A and 1645A-B demo circuits charge single cell Li-Ion batteries to float voltages of 4.1V or 4.2V respectively.

The 1645A-C and 1645A-D demo circuits operate from a 12V to 32V input source, and charge dual ce…

View Design

MCP73833EV: Li-Ion Li-Pol, 1A, Battery Charger

Manufacturer: Microchip Technology

The MCP73833 Li-Ion Battery Charger Evaluation Board is an evaluation and demonstration tool for Microchip’s MCP73833/4 Stand-Alone Linear Li-Ion/Li-Polymer Charge Management Controllers.

The evaluation board has two circuits provided with one circuit fully assembled and tested. Each circuit is set up to evaluate simple, stand-alone, linear charging of single cell Li-Ion / Li-Polymer…

View Design

ADP2291-EVAL: Single Li-Ion Battery Charger

Manufacturer: Analog Devices Inc.

The ADP2291 is a constant-current/constant-voltage linear charger for a single-cell, lithium ion battery, requiring just a few components to provide a simple and safe charging system that operates from a wide 4.5 V to 12 V input voltage range. It features an internally controlled, multistep charging cycle that improves battery life.

An external, low cost PNP provides the charging cu…

View Design

MCP73831EV: Li-Ion Li-Pol, Battery Charger

Manufacturer: Microchip Technology

Two evaluation boards are provided in the MCP73831 Evaluation Kit. The boards are set up to evaluate simple, stand-alone, linear charging of single cell Li-Ion / Li-Polymer battery packs (the battery packs are not included). Each board design provides constant current charging followed by constant voltage charging with automatic charge termination. In addition, the MCP73831-2AC board provides pre…

View Design

BQ24022EVM: Single Li-Ion Battery Charger

Manufacturer: Texas Instruments

This user's guide describes the bq24022 (bqTINY-II) Evaluation Module. The EVM provides a convenient method for evaluating the performance of a charge management solution for portable applications using the bq24022 product family.

A complete designed and tested charger is presented. The charger is designed to deliver up to 1.0 A of continuous charge current for single-cell Li-Ion or…

View Design

EVAL6924U: 1 Cell Li-Ion/Li-Pol @ 1A / 500mA

Manufacturer: STMicroelectronics

The L6924U is a fully monolithic battery charger that safely charges single-cell Li-Ion/Polymer battery from either an USB power source or an AC adapter. In USB mode, the L6924U supports both low power and high power mode. Alternatively the device can charge from an AC wall adapter. The ideal solution for space-limited portable products integrates the power MOSFET, reverse blocking diode, sense r…

View Design
47 Results - Page 1/5 |< < 1 2 3 4 5 > >|