LM5007EVAL: 10V @ 400mA, 12 ~ 75 Vin

Summary

The LM5007 Step down switching regulator features all of the functions needed to implement low cost, efficient, Buck bias regulators.

This high voltage regulator contains an 80V, 0.7A N-channel Buck switch. The regulator is based on hysteretic control scheme using an on-time inversely proportional to input voltage (VIN). This feature allows the operating frequency to remain relatively constant with load and input voltage voltage variations. The hysteretic control requires no control loop compensation, while providing fast load transient response.

Specifications

Manufacturer Texas Instruments
Category AC/DC and DC/DC Conversion
Sub-Category DC/DC SMPS - Single Output
Eval Board Part Number LM5007EVAL/NOPB-ND
Eval Board Supplier Texas Instruments
Eval Board Normally In Stock
Topology Step Down
Outputs and Type 1 Non-Isolated
Voltage Out: Factory Set 10 V
Current Out 400 mA
Voltage In 12 ~ 75 V
Efficiency @ Conditions >91%, 15V in, 10V @ 100 ~ 400 mA
>80%, 50V in, 10V @ 100 ~ 400 mA
>77%, 70V in, 10V @ 100 ~ 400 mA
Voltage Out Range - Not Given
Features Current Limit (Adj. or Fixed)
Over Voltage Protection
Shutdown, Enable, Standby
Thermal Protection
Under Voltage Protection, Brown-Out
Switching Frequency 400 kHz
Standby Current [Typical] 100 µA
Quiescent Current [Typical] 500 µA
Component Count + Extras 13 + 0
Internal Switch Yes
Design Author Texas Instruments
Application / Target Market Automotive
Standby Current [Maximum] 200 µA
Quiescent Current [Maximum] 675 µA
Main I.C. Base Part LM5007
Date Created By Author
Date Added To Library 2011-03

Eval Board

Order a fully assembled board:

Quantity Available: 0

Quantity:

Support Documents & Media

LM5007 - Datasheet LM5007EVAL - User Guide Ultra Librarian Software:CAD Symbols and Footprints (Zip File) TI's CAD/CAE Symbols and Footprint Search

Media

LM5007EVAL_Schematic.JPG LM5007EVAL_Chart.JPG