superGRIP Installation & Removal Datasheet by Advanced Thermal Solutions Inc.

View All Related Products | Download PDF Datasheet
Place FC around two corners of
the component. FC will bend
slightly at the “horseshoe” tab.
Note the direction of air flow
when placing your HS.
Press opposite end of the FC
down until it is secure around
the component’s edges.
To ensure a secure fit, push
spread apart FC slightly at the
“horseshoe” tabs while press-
ing down.
Place HS over the installed FC
so that the “horseshoe” tabs
of the FC fit within the HS’
notches.
Place spring clip within the HS’
fin field as shown. The ends of
the SC will fit over the “horse-
shoe” tabs.
Push opposite end of the SC
down over the FC with a small
screwdriver until it fits securely
on the assembly.
Shown above the is the HS,
FC and SC assembly properly
seated over the component.
To remove, place a small flat-
head screwdriver between the
spring clip and the frame clip
and pry the spring clip away
from the frame.
Remove the FC by placing a
small screwdriver within the
“horseshoe” tab and gently
twisting in either direction to
pull the frame clip away from
the component.
HEAT SINK (HS)
SPRING CLIP (SC)
FRAME CLIP (FC)
superCLIPTM
INSTALLATION GUIDE
2
1 3
5
4 6
8
7 9
For all maxiFLOWTM and Straight Fin
superGRIPTM Assemblies
superGRIPTM
INSTALLATION GUIDE
Advanced Thermal Solutions is a leading engineering and manufacturing company
supplying complete thermal and mechanical packaging solutions from analysis and
testing to final production. ATS provides a wide range of air and liquid cooling solu-
tions, laboratory-quality thermal instrumentation, along with thermal design consulting
services and training. For more information about Advanced Thermal Solutions, Inc.,
please visit www.qats.com or call 781-769- 2800.
89-27 ACCESS ROAD, NORWOOD, MA 02062 USA | T: 781.769. 2800 | ATS-HQ@QATS.COM | WWW.QATS.COM

Products related to this Datasheet

SUPERGRIP HEATSINK 40X40X17.5MM
SUPERGRIP HEATSINK 19X19X7.5MM
SUPERGRIP HEATSINK 35X35X12.5MM
SUPERGRIP HEATSINK 42X42X17.5MM
SUPERGRIP HEATSINK 31X31X7.5MM
SUPERGRIP HEATSINK 27X27X12.5MM
SUPERGRIP HEATSINK 17X17X7.5MM
SUPERGRIP HEATSINK 40X40X12.5MM
SUPERGRIP HEATSINK 42X42X17.5MM
SUPERGRIP HEATSINK 21X21X17.5MM
SUPERGRIP HEATSINK 27X27X17.5MM
SUPERGRIP HEATSINK 35X35X17.5MM
SUPERGRIP HEATSINK 31X31X17.5MM
SUPERGRIP HEATSINK 35X35X12.5MM
SUPERGRIP HEATSINK 45X45X17.5MM
SUPERGRIP HEATSINK 27X27X7.5MM
SUPERGRIP HEATSINK 23X23X17.5MM
SUPERGRIP HEATSINK 15X15X7.5MM
SUPERGRIP HEATSINK 25X25X7.5MM
SUPERGRIP HEATSINK 19X19X17.5MM
SUPERGRIP HEATSINK 19X19X12.5MM
SUPERGRIP HEATSINK 30X30X12.5MM
SUPERGRIP HEATSINK 40X40X17.5MM
SUPERGRIP HEATSINK 42X42X7.5MM
HEATSINK 35X35X17.5MM SUPERGRIP
SUPERGRIP HEATSINK 21X21X7.5MM
SUPERGRIP HEATSINK 23X23X7.5MM
SUPERGRIP HEATSINK 29X29X7.5MM
SUPERGRIP HEATSINK 30X30X7.5MM
SUPERGRIP HEATSINK 32X32X7.5MM