HMC512LP5(E) Datasheet by Analog Devices Inc.

View All Related Products | Download PDF Datasheet
ANALOG I: DEVICES Rnfls/ fl we a} a} u} o} uz:~> a} o} o} .®E@§@@@§J IE N/c IE N/C 21 mm) IE N/c IE N/C PACKAGE EASE GND V we HEHEEHHQ uxz uxz ”<2 ox;="" {sat="" 98="" uxz="" o\z="" n/c="" d="" n/c="" zl="" n/c="" i!="" mom/4="" 11="" gnd="" :l="" vcc(d\'g)="" .="" vcc(amp)="" 7="" n/c="" e="">
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
VCOS WITH FO/2 OUTPUT - SMT
1
HMC512LP5/LP5E
v0 6.0114
MMIC VCO WITH HALF FREQUENCY OUTPUT
9.6 - 10.8 GHz
General Description
Features
Functional Diagram
The HMC512LP5 & HMC512LP5E are GaAs InGaP
Heterojunction Bipolar Transistor (HBT) MMIC VCOs.
The HMC512LP5 & HMC512LP5E integrate resona-
tors, negative resistance devices, varactor diodes
and feature half frequency and divide-by-4 outputs.
The VCO’s phase noise performance is excellent over
temperature, shock, and process due to the oscilla-
tors monolithic structure. Power output is +9 dBm
typical from a +5V supply voltage. The prescaler and
RF/2 functions can be disabled to conserve current if
not required. The voltage controlled oscillator is pack-
aged in a leadless QFN 5x5 mm surface mount pack-
age, and requires no external matching components.
Triple Output: Fo = 9.6 - 10.8 GHz
Fo/2 = 4.8 - 5.4 GHz
Fo/4 = 2.4 - 2.7 GHz
Pout: +9 dBm
Phase Noise: -110 dBc/Hz @100 kHz Typ.
No External Resonator Needed
32 Lead 5 x 5 mm SMT Package: 25 mm²
Typical Applications
Low noise MMIC VCO w/Half Frequency, Divide-by-4
Outputs for:
• Point to Point/Multipoint Radio
• Test Equipment & Industrial Controls
• SATCOM
• Military End-Use
Electrical Specifications, TA = +25° C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V
Parameter Min. Typ. Max. Units
Frequency Range Fo
Fo/2
9.6 - 10.8
4.8 - 5.4
GHz
GHz
Power Output
RFOUT
RFOUT/2
RFOUT/4
+3
+6
-8
+15
+14
-3
dBm
dBm
dBm
SSB Phase Noise @ 100 kHz Offset,
Vtune= +5V @ RFOUT -110 dBc/Hz
Tune Voltage Vtune 213 V
Supply Current Icc(Dig) + Icc(Amp) + Icc(RF) 250 330 370 mA
Tune Port Leakage Current (Vtune= 12V) 10 µA
Output Return Loss 3dB
Harmonics/Subharmonics 1/2
2nd
3rd
33
25
35
dBc
dBc
dBc
Pulling (into a 2.0:1 VSWR) 5 MHz pp
Pushing @ Vtune= 5V 30 MHz/V
Frequency Drift Rate 1.2 MHz/°C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES Rnfls/
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
VCOS WITH FO/2 OUTPUT - SMT
2
HMC512LP5/LP5E
v0 6.0114
MMIC VCO WITH HALF FREQUENCY OUTPUT
9.6 - 10.8 GHz
Frequency vs. Tuning Voltage
Sensitivity vs. Tuning Voltage
SSB Phase Noise vs. Tuning Voltage
Frequency vs. Tuning Voltage, T = 25°C
Output Power vs. Tuning Voltage
SSB Phase Noise @ Vtune = +5V
8
8.4
8.8
9.2
9.6
10
10.4
10.8
11.2
012345678910111213
+25C +85C -40C
OUTPUT FREQUENCY (GHz)
TUNING VOLTAGE (Vdc)
0
2
4
6
8
10
12
14
16
012345678910111213
+25C +85C -40C
OUTPUT POWER (dBm)
TUNING VOLTAGE (Vdc)
8
8.4
8.8
9.2
9.6
10
10.4
10.8
11.2
012345678910111213
Vcc= 4.75V Vcc= 5.00V Vcc= 5.25V
OUTPUT FREQUENCY (GHz)
TUNING VOLTAGE (Vdc)
0
100
200
300
400
500
600
700
012345678910111213
+25C +85C -40C
SENSITIVITY (MHz/Volt)
TUNING VOLTAGE (Vdc)
-170
-160
-150
-140
-130
-120
-110
-100
-90
-80
-70
-60
-50
-40
-30
-20
-10
1e+2 1e+3 1e+4 1e+5 1e+6 1e+7
+25C +85C -40C
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
-125
-120
-115
-110
-105
-100
-95
-90
-85
-80
-75
012345678910111213
10khz 100khz
SSB PHASE NOISE (dBc/Hz)
TUNING VOLTAGE (Vdc)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES may
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
VCOS WITH FO/2 OUTPUT - SMT
3
HMC512LP5/LP5E
v0 6.0114
MMIC VCO WITH HALF FREQUENCY OUTPUT
9.6 - 10.8 GHz
Absolute Maximum Ratings
Vcc(Dig), Vcc(Amp), Vcc(RF) +5.5 Vdc
Vtune 0 to +15V
Storage Temperature -65 to +150 °C
Typical Supply Current vs. Vcc
Note: VCO will operate over full voltage range shown above.
Vcc (V) Icc (mA)
4.75 300
5.00 330
5.25 360
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
RFOUT/2 Frequency
vs. Tuning Voltage
RFOUT/2 Output Power
vs. Tuning Voltage
Divide-by-4 Frequency
vs. Tuning Voltage
Divide-by-4 Output Power
vs. Tuning Voltage
-10
-9
-8
-7
-6
-5
-4
-3
-2
-1
0
012345678910111213
+25C +85C -40C
OUTPUT POWER (dBm)
TUNING VOLTAGE (Vdc)
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
012345678910111213
+25C +85C -40C
OUTPUT FREQUENCY (GHz)
TUNING VOLTAGE (Vdc)
0
2
4
6
8
10
12
14
16
012345678910111213
+25C +85C -40C
OUTPUT POWER (dBm)
TUNING VOLTAGE (Vdc)
4
4.2
4.4
4.6
4.8
5
5.2
5.4
5.6
5.8
012345678910111213
+25C +85C -40C
OUTPUT FREQUENCY (GHz)
TUNING VOLTAGE (Vdc)
Reliability Information
Junction Temperature to Maintain
1 Million Hour MTTF 135 °C
Nominal Junction Temperature
(T = 85 °C) 123 °C
Thermal Resistance
(junction to ground paddle) 23 °C/W
Operating Temperature -40 to +85 °C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES may m u TOP VIEW _ BOTTOM VIEW 35% [mg a .2m 5.1a ' ‘ _ .016 [0.40] REF « [TASS [4.90]? [7.005 [0.20] man— . U Ll L1 L1 L1 L1 Li L“ ‘ 2‘ *3 C T j :\ HNNN 3% a: 3 E ”N ‘ «H .4"; :l I: XXXX 53 on 3 E 022 0.55 q: if: 3 C (017 0.44 L j :7 5 I7 *3 h CT H H H H H H 9 ‘5 LOT NUMBER ¥Exposzn a * BE [§IEE]SOUARE y GROUND in PADDLE L .002 [0.05] 000 0.00 , sum mm Q_I 5V ‘ RTOUT/‘t VchNg) \ § lApF ? I
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
VCOS WITH FO/2 OUTPUT - SMT
4
HMC512LP5/LP5E
v0 6.0114
MMIC VCO WITH HALF FREQUENCY OUTPUT
9.6 - 10.8 GHz
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15 mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05 mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.
Part Number Package Body Material Lead Finish MSL Rating Package Marking [3]
HMC512LP5 Low Stress Injection Molded Plastic Sn/Pb Solder MSL3 [1] H512
XXXX
HMC512LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL3 [2] H512
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
Pin Descriptions
Pin Number Function Description Interface Schematic
1 - 3, 8 - 10, 13 - 18,
20, 22 - 28, 30 - 32 N/C No Connection. These pins may be connected to RF/
DC ground. Performance will not be affected.
4RFOUT/4 Divide-by-4 output. DC block required.
6 Vcc (Dig)
Supply voltage for prescaler. If prescaler is not
required, this pin may be left open to conserve
approximately 65 mA of current.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES Rnfls/ ”GND +§V J1 K9 VTUNE J5 J1 4 21 2.5GHz RFOUT/A Vcc(RF) +5v LOOOPF IODpF 2.2m J; l ; +5v >fis Vcc(|}ig) Mar lOOpFI J6 : : J4 +5v >fi7 Vcc(Amp) RFOIIT%\CLOGHI Mar ‘OOPFI RFDUT/Z = = $1 L5." PACKAGE 5mm BASE
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
VCOS WITH FO/2 OUTPUT - SMT
5
HMC512LP5/LP5E
v0 6.0114
MMIC VCO WITH HALF FREQUENCY OUTPUT
9.6 - 10.8 GHz
Pin Descriptions
Pin Number Function Description Interface Schematic
7Vcc (Amp)
Supply voltage for RFOUT/2 output. If RFOUT/2
is not required, this pin may be left open to
conserve approximately 30 mA of current.
12 RFOUT/2 Half frequency output (AC coupled).
19 RF OUT RF output (AC coupled).
21 Vcc (RF) Supply Voltage, +5V
29 VTUNE
Control voltage and modulation input. Modulation
bandwidth dependent on drive source impedance. See
Determining the FM Bandwidth of a Wideband Varac-
tor Tuned VCO” application note.
5, 11, Paddle GND Package bottom has an exposed metal paddle that
must be connected to RF/DC ground.
Typical Application Circuit
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ANALOG DEVICES aqgl V TUNE Hfiflfififié 1 10225—5 RF OUT 4 RFOUT/A / J2 J4 RF OUT/2 RFOUT/Z J3
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
VCOS WITH FO/2 OUTPUT - SMT
6
HMC512LP5/LP5E
v0 6.0114
MMIC VCO WITH HALF FREQUENCY OUTPUT
9.6 - 10.8 GHz
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and backside ground paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
Evaluation PCB
List of Materials for Evaluation PCB 110227 [1]
Item Description
J1 - J4 PCB Mount SMA RF Connector
J5 - J6 2 mm DC Header
C1 - C3 100 pF Capacitor, 0402 Pkg.
C4 1,000 pF Capacitor, 0402 Pkg.
C5 - C7 2.2 µF Tantalum Capacitor
U1 HMC512LP5 / HMC512LP5E VCO
PCB [2] 110225 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D

Products related to this Datasheet

VCO 5.1GHZ/10.2GHZ 2-13V 5X5MM
VCO 5.1GHZ/10.2GHZ 2-13V 5X5MM
VCO 5.1GHZ/10.2GHZ 2-13V 5X5MM
BOARD EVAL HMC512LP5E
VCO 5.1GHZ/10.2GHZ 2-13V 5X5MM