3.12V Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 3
Stocking Options
Environmental Options
Media
Marketplace Product
3Results
Applied FiltersRemove All

Showing
of 3
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Output Configuration
Output Type
Number of Regulators
Voltage - Input (Max)
Voltage - Output (Min/Fixed)
Voltage - Output (Max)
Voltage Dropout (Max)
Current - Output
Current - Quiescent (Iq)
PSRR
Control Features
Protection Features
Operating Temperature
Mounting Type
Package / Case
Supplier Device Package
DGD05473FNQ-7
AP7176BFN-7
IC REG LINEAR POS ADJ 3A 10UDFN
Diodes Incorporated
5,396
In Stock
24,000
Factory
1 : $1.76000
Cut Tape (CT)
3,000 : $0.40237
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Positive
Adjustable
1
3.65V
0.8V
3.12V
0.53V @ 3A
3A
1.5 mA
-
Enable, Power Good
Over Current, Over Temperature, Power On Reset (POR), Short Circuit, Soft Start
-40°C ~ 85°C
Surface Mount
10-UFDFN Exposed Pad
U-DFN3030-10
AL8861MP-13
AP7176BMP-13
IC REG LIN POS ADJ 3A 8-MSOP-EP
Diodes Incorporated
14,210
In Stock
30,000
Factory
1 : $2.43000
Cut Tape (CT)
2,500 : $0.52500
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Positive
Adjustable
1
3.65V
0.8V
3.12V
0.53V @ 3A
3A
1.5 mA
-
Enable, Power Good
Over Current, Over Temperature, Power On Reset (POR), Short Circuit, Soft Start
-40°C ~ 85°C
Surface Mount
8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
8-MSOP-EP
AL9910A-5SP-13
AP7176BSP-13
IC REG LINEAR POS ADJ 3A 8-SO-EP
Diodes Incorporated
2,299
In Stock
767,500
Factory
1 : $2.62000
Cut Tape (CT)
2,500 : $0.66446
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Digi-Reel®
Active
Positive
Adjustable
1
3.65V
0.8V
3.12V
0.53V @ 3A
3A
1.5 mA
-
Enable, Power Good
Over Current, Over Temperature, Power On Reset (POR), Short Circuit, Soft Start
-40°C ~ 85°C
Surface Mount
8-SOIC (0.154", 3.90mm Width) Exposed Pad
8-SO-EP
Showing
of 3

3.12V Voltage Regulators - Linear, Low Drop Out (LDO) Regulators


Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.