Common Mode Chokes

Showing

of 4

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Filter Type	Number of Lines	Impedance @ Frequency	Inductance @ Frequency	Current Rating (Max)	DC Resistance (DCR) (Max)	Voltage Rating - DC	Voltage Rating - AC	Operating Temperature	Ratings	Approval Agency	Features	Grade	Qualification	Mounting Type	Size / Dimension	Height (Max)	Package / Case
ACT45B-101-2P-TL003 CMC 100UH 150MA 2LN 5.8KOHM SMD TDK Corporation	52,753 In Stock	1 : $2.34000 Cut Tape (CT) 2,500 : $1.23245 Tape & Reel (TR)	ACT45B	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Signal Line	2	5.8 kOhms @ 10 MHz	100 µH @ 100 kHz	150mA	2Ohm	50V	-	-40°C ~ 150°C	-	-	-	Automotive	AEC-Q200	Surface Mount	0.177" L x 0.126" W (4.50mm x 3.20mm)	0.118" (3.00mm)	Horizontal, 4 PC Pad
ACT45B-510-2P-TL003 CMC 51UH 200MA 2LN 2.8KOHM SMD TDK Corporation	61,695 In Stock	1 : $2.36000 Cut Tape (CT) 2,500 : $1.23743 Tape & Reel (TR)	ACT45B	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Signal Line	2	2.8 kOhms @ 10 MHz	51 µH @ 100 kHz	200mA	1Ohm	50V	-	-40°C ~ 150°C	AEC-Q200	-	-	-	-	Surface Mount	0.177" L x 0.126" W (4.50mm x 3.20mm)	0.118" (3.00mm)	Horizontal, 4 PC Pad
ACT45B-110-2P-TL003 CMC 11UH 250MA 2LN 600 OHM SMD TDK Corporation	44,564 In Stock	1 : $2.42000 Cut Tape (CT) 2,500 : $1.26672 Tape & Reel (TR)	ACT45B	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Signal Line	2	600 Ohms @ 10 MHz	11 µH @ 100 kHz	250mA	600mOhm	50V	-	-40°C ~ 150°C	-	-	-	-	-	Surface Mount	0.177" L x 0.126" W (4.50mm x 3.20mm)	0.118" (3.00mm)	Horizontal, 4 PC Pad
ACT45B-220-2P-TL003 CMC 22UH 200MA 2LN 1.2 KOHM SMD TDK Corporation	21,049 In Stock	1 : $2.42000 Cut Tape (CT) 2,500 : $1.26672 Tape & Reel (TR)	ACT45B	Tape & Reel (TR) Cut Tape (CT) Digi-Reel®	Active	Signal Line	2	1.2 kOhms @ 10 MHz	22 µH @ 100 kHz	200mA	1Ohm	50V	-	-40°C ~ 150°C	-	-	-	-	-	Surface Mount	0.177" L x 0.126" W (4.50mm x 3.20mm)	0.118" (3.00mm)	Horizontal, 4 PC Pad

Showing

of 4

A common mode choke is an electrical filter that blocks high frequency noise common to two or more data or power lines while allowing the desired DC or low-frequency signal to pass. Common mode (CM) noise current is typically radiated from sources such as unwanted radio signals, unshielded electronics, inverters and motors. Left unfiltered, this noise presents interference problems in electronics and electrical circuits.