1000 Series Datasheet by APEM Inc.

View All Related Products | Download PDF Datasheet
• Shaft: Stainless steel
• Boot: Neoprene
Handles :
BL - Phenolic
D, M, AE - Aluminum
F - Nylon
H, T, AJ - Stainless steel
J, V - ABS
• Contact : Gold plated silver (switch 1), Silver (other switches )
MATERIALS
• Mechanical Angle of Movement: 24° X & Y axis (subject to limiter plate)
• Expected Mechanical Life: 5 million lifecycles
• Mass/weight: 40 g (1.41 oz) (subject to handle)
MECHANICAL SPECIFICATIONS
• Maximum Voltage: 250 VAC
ELECTRICAL SPECIFICATIONS
One or two axis
5 A – 16 A switch solutions
Single or double pole
Bushing or screw mount
Variety of handle options
DISTINCTIVE FEATURES
• Operating Temperature: -20 °C to +50 °C (-4 °F to + 122 °F)
• Sealing: IP67 (above panel, subject to handle)
ENVIRONMENTAL SPECIFICATIONS
1000 series
Compact fingertip controllers •
switching technology
The company reserves the right to change specifications without notice.
1
JOYSTICKS
JOY-1000-1807
The joystick is mounted from beneath the panel using the 4 x M2.5 machine
screws, supplied with the joystick.
Supplied as standard with the joystick is a round bezel which may be fitted
(according to customer preference) to finish the front face of the panel.
Fitting the bezel is optional, and is not necessary if the panel cut-out finishes
the panel. If fitting the bezel is selected then the panel cut out should be
toleranced such that the bezel is an interference fit. Additionaly bonding the
bezel is recommended.
Compact fingertip controllers •
switching technology
1000 series
MOUNTING
V3 SCREW MOUNT CUT-OUT
V4 SCREW MOUNT CUT-OUT
V4 SCREW MOUNT CUT-OUT V4 BUSH MOUNT CUT-OUT
V4 SCREW MOUNT INSTALLATION
V3 SCREW MOUNT INSTALLATION V4 BUSH MOUNT INSTALLATION
The joystick is mounted from
beneath the panel.
Supplied as standard with
all bush mount joysticks, is
a neoprene sealing gasket.
This should be fitted between
the joystick and the panel, in
applications where a good seal
is needed.
Suitable for panel up to 3 mm
tick.
Torque for fixing nut : < 1 Nm
2
JOYSTICKS
SWITCHES
16 A - V4*
216 A - V3
310 A - V4*
4Right Angle V4*
55 A/250 V AC - V4*
Faston Style
6
5 A/250 V AC - V3
Faston Style with
screw fixing
710 A/250 V AC -
V4* IP67
MODIFIER
00 None
34 + Limiter Fitted
39 Slot Limiter
Fitted
D22 mm Bush*
V4 Point Screw
MOUNTING
1Long*
5Standard V4*
6For Pushbutton V4*
7For Double Pole V4 or V3
9Double Pole and
Pushbutton V4*
LEVER
0Not Supplied
1Standard
LIMITER AND BEZEL SET
1Single Pole
2Double Pole*
POLES
1Screw Mount
5Bush Mount*
BOOT
BL Round
DCylindrical
FConical
HTall Conical
JPushbutton*
MPushbutton*
TPushbutton*
VBullet
AE Rocker*
AJ Stainless Steel
HANDLE
BUILD YOUR PART NUMBER
1000 series
Compact fingertip controllers •
switching technology
NOTES:
*Unavailable with V3 construction
3
JOYSTICKS
xsoo mu nw um nun IIIIII 5’59: zen» um “w an muss» an) my .xsu un 51;» um
V4 BUSH MOUNT
V4 SCREW MOUNT
V4 SCREW MOUNT DOUBLE POLE
V3 SCREW MOUNT
Compact fingertip controllers •
switching technology
1000 series
JOYSTICKS
4
1400 W (055» V .2 m m 5m 7 mm) , / u 26) .5 an m 59) 30 “D 35 W [I u) H ”l 10 an m 79) IS 50 ' (0 6|) m on n 39 4' Y 1 V0 33) W ma Pu so 4' x m M , mu) /\_/\ 17w m m u m n m use Yul) “I“ (U!) n on n 221 m in re.» m%@@® 4X :|:P 133 (o w»
LIMITERS AND BEZEL SETS
HANDLE OPTIONS
Finish and standard color:
BL, V - Gloss black
D, M, AE - Anodized black
F, J - Matt black
H - Natural Stainless Steel
T, AJ - Polished Stainless Steel
Pushbutton (J, M, T) and rocker switches (AE) are for
bushmount configurations only.
BL : Handle is supplied loose because it is larger than
panel cutout. The handle should be press fitted to the
joystick, once the joystick is installed in the panel.
J, M, T : Use APEM IS switch
AE : Use APEM TR switch
Unless otherwise specified, all joysticks are supplied
with black switches in the handles.
BL Round D Cylindrical F Conical H Tall Conical
J, M or T Pushbutton V Bullet AE Rocker AJ Stainless Steel
1000 series
Compact fingertip controllers •
switching technology
5
JOYSTICKS
IHI O O | G)
Compact fingertip controllers •
switching technology
1000 series
CONFIGURATION OPTION
Seven switch options are specified as standard. All are confi-
gured with changeover contacts, allowing the user flexibility
of connection.
Option 1 - V4 - 6 A/240 V AC should be specified where
the joystick will be switching smaller current levels. These
switches are supplied with gold flash terminals to ensure
reliable switching at very low current levels.
Option 2 - V3 - 16 A/240 V AC should be specified where
the joystick will be switching up to 16 A.
Option 3 - V4 - 10 A/240 V AC should be specified where
the joystick may be switching up to 10 A.
Option 4 - V4 - 5 A/250 V AC with right angle terminals,
should be specified for PCB mounting or simpler
termination.
Option 5 - V5 - 5 A/250 V AC with 2.8 mm Faston style
terminals.
Option 6 - V3 - 16 A/250 V AC with long terminals and
screw fixing.
• Option 7 - V4 - 10 A/250 V AC sealed to IP67.
Note: The construction of the joystick employing V3 switches
is not available with as many configuration options.
Life and reliability of the switches is heavily determined by
the type of application and parameters such as load.
Contact the factory for further advice about the expected
switch performance under differing loads or DC supplies.
MECHANICAL OPERATION
All 1000 series are supplied with an open square
gate. As a standard option the joystick may be
supplied with an additional plastic limiter set, that
allows the customer to retro-fit limiters to reduce
the travel to single axis(-), cross (+) or diagonal (X)
operation. For harsh environments metal limiters are
also available.
Joysticks are supplied as standard without a cable
harness, allowing the user flexibility of connection.
Alternatively the joystick may be factory configured
with fitted limiters or cable harnesses, upon cus-
tomer request.
SEALING
Two boot options are offered as standard to provi-
de an above-panel seal. When specifying a bush
mount joystick select boot option 5 which yields
an IP65 seal. Alternatively boot option 1 should be
selected for 4 point screw mount joysticks which
yields an IP67 seal.
As standard, a sealing gasket is supplied with
all bush mount joysticks, to ensure a good seal
between the joystick body and the panel. The sea-
ling standards quoted are panel seals. It is assumed
that the below panel area will be sealed. For appli-
cations where below panel seal can not be assured,
switch option 7 should be selected.
DOUBLE POLE OPERATION
The construction of the joystick is designed such
that both switches nominally trigger simultaneously.
Such simultaneous triggering is subject to a ± 2º
tolerance (between switches) owing to the mecha-
nical tolerances and hysterisis of each switch.
MOUNTING
The 1000 series is available in two mounting op-
tions, four point screw mount or bush mount. The
V4 screw mount option is supplied with M2.5 x 20
mm screws, whereas the larger construction of V3
screw mount joystick is supplied with M2.5 x 25 mm
screws. All screws supplied are slotted, pan head
machine screws, although longer pan head screws,
or countersunk heads are also available upon
request.
LEVERS
Lever option 5 provides for a low profile above the
panel (41 mm/1.61 inch), this option is very popular
for those applications requiring a compact, stubby
design. Lever option 1 is an additional 5 mm/0.20
inch taller. Lever option 6 should be specified for a
push button handle, and lever option 7 is designed
for V4 double-pole, or V3 constructions. Lever option
9 is for double-pole and pushbutton joysticks. Addi-
tional custom levers are available upon request..
SWITCHES
6
JOYSTICKS

Products related to this Datasheet

SWITCH JOYSTICK 6A 250V
Available Quantity: 1,887
Unit Price: 143.08
SWITCH JOYSTICK 6A 250V
Available Quantity: 193
Unit Price: 115.36
SWITCH JOYSTICK 16A 250V
Available Quantity: 79
Unit Price: 132.24
SWITCH JOYSTICK 6A 250V
Available Quantity: 24
Unit Price: 219.02
SWITCH JOYSTICK 10A 250V
Available Quantity: 0
Unit Price: 260.628
SWITCH JOYSTICK 6A 250V
Available Quantity: 0
Unit Price: 98.92
SWITCH JOYSTICK 6A 250V
Available Quantity: 0
Unit Price: 324.86