ERP610 Series Datasheet by KEMET

View All Related Products | Download PDF Datasheet
E‘ectromc Components KEII/IEI' CHARGED?
KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1085_ERP610 05/21/19
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
1
One world. One KEMET
Overview
KEMET’s ERP610 encapsulated radial leaded ceramic disc
capacitors are specifically designed for interference-
suppression AC line filtering applications. Having
internationally recognized safety certifications, these
capacitors are well-suited for applications that require
keeping potentially disruptive or damaging line transients
and EMI out of susceptible equipment. They are also an
ideal solution when needing to suppress line disturbances
at the source.
Safety certified capacitors are classified as either X and/
or Y capacitors. Class X capacitors are primarily used in
line-to-line (across-the-line) applications. In this applica-
tion there is no danger of electric shock to humans should
the capacitor fail, but could result in a risk of fire. The class
Y capacitor is primarily used in line-to-ground (line by-pass)
applications. In this application, failure of the capacitor could
lead to danger of electric shock.
With a working voltage of 760 VAC in line-to-line (class X) and
500 VAC in line-to-ground (class Y) applications, these safety
capacitors meet the impulse test criteria outlined in IEC Stan-
dard 60384. Meeting subclass X1 and Y1 requirements, these
devices are certified to withstand impulses up to 4 KV (X1)
and 8 KV (Y1) respectively. These encapsulated devices also
meet the flame test requirements outlined in UL Standard 94
V–0.
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610
Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Benefits
• Safety Standard Recognized (IEC 60384-14)
• Reliable operation up to 125°C
• Class X1/Y1
• 10 mm and 12.5 mm lead spacing
• RoHS compliant
• Capacitance offerings ranging from 33 pF up to 4.7 nF
• Available capacitance tolerances of ±10% and ±20%
• High reliability
• Preformed (crimped) or straight lead configurations
• Non-polar device, minimizing installation concerns
• Encapsulation meets flammability standard UL 94 V–0
Applications
• Line-to-Line (Class X) filtering
• Line-to-Ground (Class Y) filtering
• Antenna coupling
• Primary and secondary coupling (switching power supplies)
• Line disturbances suppression (motors and motor controls, relays, switching power supplies, and invertors)
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
ammmc compmm KEIVIEI' crummy:
KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1085_ERP610 05/21/19
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
2
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Packaging C-Spec Ordering Options Tables
Bulk Packaging1
LEAD LENGTH L LEAD DIAMETER D LEAD SPACING F
Straight leads
10 mm
12.5 mm
30 mm − 3 mm
0.6 mm
DF0
EF0
0.8 mm
DJ0
EJ0
10 mm ± 1 mm
0.6 mm
DD0
ED0
0.8 mm
DH0
EH0
6 mm − 1 mm
0.6 mm/0.8 mm
DB0
EB0
Preformed leads inside crimp 30 mm − 3 mm
0.6 mm
EFG
0.8 mm
EJG
Preformed leads outside crimp 5 mm ± 1 mm
0.6 mm
TE0
TG0
0.8 mm
TF0
TH0
Preformed leads snap-in
Minimum 2.8 mm
0.6 mm
QG0
Minimum 3.5 mm
0.8 mm
QH0
Inline wire
Minimum 2.8 mm + 1.5 mm
0.6 mm
YE0
YG0
Minimum 3.0 mm + 2.0 mm
0.8 mm
YF0
YH0
1 5 mm and 7 mm lead spacing options are not available for ERP610.
Reel Packaging Component Pitch 25.4 mm1
TAPING F
Lead spacing F 10 mm 12.5 mm
Body diameter D All diameters
Straight leads
H = 16.5 mm
DRT
ERT
H = 18.0 mm
DRU
ERU
H = 20.0 mm
DRY
ERY
Preformed leads inside crimp H0 = 16.0 mm ERZ
Preformed leads outside crimp H0 = 16.0 mm TDR TER
Inline wire H0 = 16.0 mm YRD YRE
1 5 mm and 7 mm lead spacing options are not available for ERP610.
Ordering Information
ERP610 W102 MDF0
Ceramic
Series
Voltage Rating
(Safety Subclass Rating)
Capacitance
Code (pF)
Capacitance
Tolerance
Lead configuration/
Packaging Code
ERP610 W = X1 760 VAC/Y1 500 VAC Two significant digits and number
of zeroes
K = ±10%
M = ±20%
*See Packaging Options
ammm Compancnls KEIl/IEI' Safely Smndard Recognized, ERPGWO, Encapsu‘aled, X1 760 VAC/V1 500 VAC (lndusma‘ Grade) CHARGED!
KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1085_ERP610 05/21/19
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
3
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Approval Standard and Certification Number
Safety Standard Specification Certificate Number
VDE EN 132400 40001993, 40001996
UL
CAN/CSA
UL 60384–14 and
E60384–14 E356389
These devices are VDE/ENEC recognized for antenna coupling and AC line-to-line (class X) and line-to-ground (class Y) applications per IEC60384–14.
Environmental Compliance
These devices are Halogen-free and RoHS compliant. They meet all the requirements set forth by both EU and China RoHS
directives.
Eimmm Compancnls KE/VIEI' CHARGED: “:35." 1 0d 0.6 ma 8 0d 0.6 or 0 8 F 7.5 10 12 5 A 4.0115 5.0315 6.0215 3 0 mm minimum Tolerance: 1 0 mm absoluie fl AH; mm! ‘1‘ 0d 0.6 0.8 F 75/10/125 7.5/10/125 2 8 mm 3.5 mm minimum minimum 4 5 6.0 6.0 H 2 6 33 maximum maximum maximum P1 1.25 155 28 3.0 3-0 P2 155 195 "1'1?“ "2"3“ "2'13“ A D 78: 6 0:15 D > 8:7.0115 absoluie absumle absolute
KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1085_ERP610 05/21/19
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
4
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Lead Configurations
Straight Leads Inside Kink Outside Kink
D Maximum
V
F
S Maximum
Ød ±0.05
L
F V
e Maximum
D Maximum S Maximum
Ød ±0.05
Point of
support
on printed
cardboard
Coating on
lead shall
not extend
below this
line
L
+0.5
1.8 *
–0.2
+0.5
1.8 *
–0.2
F V
A ±1.5
V
F
D Maximum S Maximum
Ød ±0.05
2.2 ±0.32.2 ±0.3
Point of
support
on printed
cardboard
Coating on
lead shall
not extend
below this
line
F V
A
V
F
0.6 or 0.8
30−3 or 10±1
5
7.5
10
3.0 mm maximum
0.6 or 0.8
7.5
10
12.5
4.0±1.5
5.0±1.5
6.0±1.5
L
3.0 mm minimum
Tolerance: 1.0 mm absolute
Фd 0.6 0.6 or 0.8
F5.0 7.5 7.5 10.0 12.5
A5.0 5.0 6.0 6.0 6.0
Snap-In Leads Vertical Crimp
D Maximum
V
F
S Maximum
Ød ±0.05
Point of
support
on printed
cardboard
Coating on
lead shall
not extend
below this
line
+1.5
L–0
+0.3
P1–0.1 +0.3
P2–0.1
F
V
A ±1.5
H ±0.3
D Maximum S Maximum
Ød ±0.05
Point of
support
on printed
cardboard
L
A
H
F
Coating on
lead shall
not extend
below this
line
0.6
0.8
7.5/10/12.5
7.5/10/12.5
L
2.8 mm
minimum
3.5 mm
minimum
2.6
3.3
1.25
1.65
1.65
1.95
D - 8: 6.0±1.5 D > 8: 7.0±1.5
F7.5 10 12.5
D0.6 0.8 0.8
A
4.5
maximum
6.0
maximum
6.0
maximum
L
2.8
minimum
1.5
absolute
3.0
minimum
2.0
absolute
3.0
minimum
2.0
absolute
ammmc compmm KEIVIEI' crummy:
KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1085_ERP610 05/21/19
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
5
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
General Specifications/Performance Characteristics
Dielectric/Temperature Characteristic U2J Y5S Y5T Y5U
Operating Temperature Range: −40°C to +125°C
Capacitance Change with Reference to +25°C
and 0 VDC Applied (TCC): 750 ±120 ppm/ºC ±22% +22%/−33% 22%/−56%
Test Voltage Between Terminals
Component test:
4,000 VAC, 50 Hz, 2 seconds
As repeated test admissible only once with
4,000 VAC, 50 Hz, 60 seconds
Random sampling test (destructive test):
4,000 VAC, 50 Hz, 60 seconds
Dielectric Strength of Body Insulation 4,000 VAC, 50 Hz, 60 seconds (destructive test)
1Dissipation Factor (tanδ) at +25ºC10.50% 2.50%
Insulation Resistance (IR) Limit at +25°C 10,000 MΩ minimum
(500 VDC applied for 60 ±5 seconds at 25°C)
*C = Nominal capacitance
1 Capacitance and Dissipation Factor (DF) measured under the following conditions:
U2J: 1 MHz ±100 kHz and 1.0 ±0.2 Vrms
Y5S, Y5T and Y5U: 1 kHz ±50 Hz and 1.0 ±0.2 Vrms
Note: When measuring capacitance, it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known
as Automatic Level Control (ALC). The ALC feature should be switched to "ON."
Table 1 – Product Ordering Codes and Ratings
Dielectric/
Temp.
Char.
KEMET
Part Number Capacitance Capacitance
Tolerance
Dimensions (mm) Lead Spacing
Body
Diameter
(Maximum)
Body
Thickness
(Maximum)
Lead
Diameter
Width
V
±0.5 mm
Bulk
Packaging
Ammo
Packaging
U2J ERP610W330 33 pF
±10%
±20%
8.0
6.0
0.6
0.8
1.9
10
12.5
Y5S
ERP610W470 47 pF 2.3
ERP610W680 68 pF 2.3
ERP610W101 100 pF 2.3
Y5T ERP610W151 150 pF 2.3
ERP610W221 220 pF 2.3
Y5U
ERP610W331 330 pF 2.5
ERP610W471 470 pF
5.0
2.1
ERP610W681 680 pF 2.1
ERP610W102 1,000 pF 9.0 2.1
ERP610W152 1,500 pF 10.0 2.1
ERP610W222 2,200 pF 12.0 2.1
ERP610W272 2,700 pF 13.0 2.1
ERP610W332 3,300 pF 15.0 2.1
ERP610W392 3,900 pF 2.1
ERP610W472 4,700 pF 17.0 2.1
KEMET
Part Number Capacitance Capacitance
Tolerance
Body Diameter
(Maximum)
Body Thickness
(Maximum)
Lead Diameter
Width
V ±0.5 mm Lead Spacing
To properly complete ordering code, enter the three-digit alphanumeric "Packaging Code." See "Dimensions" section of this document, page 2, for
available options.
E‘Icunmc Companm; KEIVIEI' cumin: Resistance to Soldering Heat
KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1085_ERP610 05/21/19
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
6
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Soldering and Mounting Information
Soldering Specifications
Solderability
Resistance to Soldering
Heat
Soldering Temperature 235°C ±5°C 260°C ±5°C
Solder Duration 2 seconds ±0.5 seconds 10 seconds ±1.0 seconds
Distance from
component body ≥ 2 mm ≥ 5 mm
CSA (cUL recognition) C 22.2 No. 1-M90 (Ur = 250 VAC) 216038
Soldering test for capacitors with wire leads (according to IEC 60068-2-20, solder bath method)
Sodering Recommendations
When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specification of the capacitor.
Subjecting this product to excessive heating could reflow the solder joint between the lead and ceramic element and/or may
result in thermal shocks that can crack the ceramic element.
Cleaning Recommendations
The components should be cleaned immediately following the soldering operation with vapor degreasers.
Marking
IEC 60384-14 Marking Approval
Markings
Rated Capacitance
(3 Characters)
Capacitance
Tolerance Code
(1 Character)
Series Name
Front Back
Capacitor Class
and Rated Voltage
EVOX RIFA
Trademark1
Capacitance
Tolerance Code
(1 Character)
Series Name
Rated
Capacitance
(3 Characters)
Capacitor
Class and
Rated Voltage
EVOX RIFA
Trademark1
Body Diameter 10.0 mm Body Diameter 10.0 mm
1 EVOX RIFA and all associated products were acuired by KEMET in 2007. The EVOX RIFA trademark is still used on the capacitor marking.
TAPING PIT/U COMPONENT PITCH 0.5 LEAD SPACING 5.0 mm “%§I'%§Km a «M An» RcIr‘mncc Um: *flnwwr 4‘94- PM, TAPING PIT/U COMPONENT PITCH 0.5 EAD SPACING 7.5 mm mag” .L. a A. K m g ‘4 Vigil g ‘ .5. I .— 1 TAPING F 0MPONENT PITCH 1.0 inch AD SPACING 5.0 mm, 7.5 mm, 10.0 mm, and 12.5 mm an F Heflwance W EIecxmmc Compancnls KEII/IEI' Emma):
KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1085_ERP610 05/21/19
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
7
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Figure 1 - Ammo Pack Taping Format
TAPING P/T/U
COMPONENT PITCH 0.5 inch
LEAD SPACING 5.0 mm
TAPING P/T/U
COMPONENT PITCH 0.5 inch
LEAD SPACING 7.5 mm
TAPING F
COMPONENT PITCH 1.0 inch
LEAD SPACING 5.0 mm, 7.5 mm, 10.0 mm, and 12.5 mm
.
Emctmmc Compancnl: KEIl/IEI' CHARGED!
KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1085_ERP610 05/21/19
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
8
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Table 3 – Ammo Pack Taping Specifications
1 Prefromed (crimped) lead configurations include vertical kink, outside kink and inside kink. See "Lead Configurations" and "Ordering Information"
sections of this document for further details.
2 Also referred to as "lead length" in this document.
Lead Style TAPING P TAPING T TAPING U TAPING F
Item Symbol Dimensions(mm)
Pitch of component P12.7 ±1 25.4 ±1
Pitch of sprocket hole P0 12.7 ±0.3 12.7 ±0.3
Distance, hole to lead P1 3.85 ±0.7 (0.5F) ±0.7
Distance, hole to center of component P2 6.35 ±1.3 12.7 ±1.3
Lead spacing F 5.0/7.5 +0.8/−0.2 5/7.5/10/12.5 ±0.8
Average deviation across tape ∆h ±2.0 maximum ±3.0 maximum
Average deviation in direction of reeling ∆p ±1.3 maximum ±1.3 maximum
Carrier tape width W18.0 +1/0.5 18.0 +1/−0.5
Hold-down tape width W0 6 6
Position of sprocket hole W1 9.0 +0.75/−0.5 9.0 +0.75/−0.5
Distance of hold-down tape W2 3.0 maximum 3.0 maximum
Distance between the abscissa and the
bottom place of the component body
(straight leads)
H16.5±0.5 18.0 +2/−0 20±1
16.5 ±0.5
18.0 +2/−0
20.0 ±1
Distance between the abscissa and the
bottom place of the component body
(kinked leads)
H0 16.0 ±0.5 16.0 ±0.5
Length of cut leads L 11.0 maximum 11.0 maximum
Diameter of sprocket hole D0 4.0 ±0.2 4.0 ±0.2
Total tape thickness t0.9 maximum 0.9 maximum
ammmc compmm KEIVIEI' cumin:
KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard C1085_ERP610 05/21/19
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
9
Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
KEMET Electronics Corporation Sales Offi ces
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.

Products related to this Datasheet

CAP CER 2200PF 760VAC Y5U RADIAL
Available Quantity: 700
Unit Price: 1.61