Low Voltage Splices Catalog Datasheet by 3M

View All Related Products | Download PDF Datasheet
PHONE: 800-245-3573 www.3M.com/Electrical 147
Low Voltage Splices, 1000 V or less
For installations from 120 V to 1 kV, 3M offers several low voltage splice
options, including 3M-developed cold shrink technology, heat shrink, resin and
tape. 3M™ Low Voltage Splices are reliable in buried, overhead, indoor or
outdoor applications.
Low Voltage Splices, 1000 V or less
Section Page
3M™ Heat Shrink Splice Kits............................................................149-152
3M™ Splice Kit UF ..................................................................................................................149
3M™ Airport Lighting Connector Sealing Kit ............................................................................149
3M™ Heat Shrink Heavy-Wall Cable Sleeves ITCSN .........................................................150-152
3M™ Direct Bury Splice Kits ............................................................152-153
3M™ Direct Bury Splice Kit DBO/B-6.......................................................................................152
3M™ Direct Bury Splice Kit DBR/Y-6 .......................................................................................153
3M™ Resin Splice Kits.....................................................................154-162
3M™ Scotchcast™ Inline Splice Kits, 72-N Series ..................................................................154
3M™ Scotchcast™ Re-Enterable Signal and Control Cable Splice Kits 78-R Series.................155
3M™ Scotchcast™ Multi-Mold Resin Splice Kits 85 Series.....................................................156
3M™ Scotchcast™ Wye Resin Splice Kit 90-B1......................................................................157
3M™ Scotchcast™ Flexible Power Cable Tap Splice Kit 82-BF1..............................................157
3M™ Scotchcast™ Inline Resin Power Cable Splice Kits 82-A Series......................................158
3M™ Scotchcast™ Wye Resin Splice Kit 82-B1......................................................................158
3M™ Scotchcast™ Flexible Power Cable Inline Splicing Kits 82-F Series................................159
3M™ Scotchcast™ Flame-Retardant Compound 2131 ...........................................................160
3M™ Scotchcast™ Potting Kit 2136.......................................................................................161
3M™ Resin Pressure System Components ..............................................................................162
3M™ Cold Shrink Splice Kits............................................................163-171
3M™ Cold Shrink Connector Insulators 8420 and 8430 Series.........................................163-164
3M™ Cold Shrink Silicone Insulators 8440 Series (1000 Volts or less) .....................................165
3M™ Cold Shrink Quick Insulator QI Series .............................................................................166
3M™ Cold Shrink Quick Splice Low Voltage QSLV-M Series.....................................................167
3M™ Cold Shrink Connector Insulator WF Series.....................................................................168
3M™ Inline Splices for 3/C or 4/C Armored Power Cable (Teck-90) 5730 Series ......................169
3M™ Resin/Cold Shrink Non-Shielded, Armored or Non-Armored Splice Kits 5750 Series .......170
3M™ Cold Shrink Portable Cable Splice Kits 2237A and 2238A...............................................171
IronwoodPremium_243201_Catalog-On-Demand1.QXD 7/10/2013 8:13 PM Page 147
148 FAX: 800-245-0329
Cable Types for Low Voltage Splicing
Single Conductor Cable
Multiple Conductor Unshielded Signal and Control Cable
Multiple Conductor Shielded Signal and Control Cable
Multiple Conductor, to 1000 Volt, Cable
Three-Conductor Armored, Non Shielded Cable
Three-Conductor Non-Armored, Non Shielded Cable
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand1.QXD 7/10/2013 8:13 PM Page 148
PHONE: 800-245-3573 www.3M.com/Electrical 149
3M™ Heat Shrink Splice Kits
3M™ Splice Kit UF
3M™ Splice Kit UF is designed to provide a reliable, moisture proof electrical connection for type UF-B underground feeder cable rated for 600 V (copper
wire only) ranging from #14/3 without ground wire up to #8/3 with ground wire.
The UF splice kit consists of a connector-insulation assembly and a heat shrink tube. The connector assembly contains four cylindrical set screw
connectors separated by a piece of vinyl insulation. The heat shrink tube is a heavy-wall, adhesive-lined tube. Underground Feeder (UF)-B cables are flat,
and typically have three solid conductors without a ground or two solid conductors with a ground. They range in size from 14–8 AWG. The most common UF
cable size is 14–10 AWG.
Voltage Rating 600 V (copper wire only)
Number of Conductors Single Conductor
Cable/Shielding Type Non-Shielded
Splice Type Heat Shrink
Operating Temperature
Range
-67°F to 230°F (-55°C to 110°C)
RoHS 2011/65/EU Yes
Agency Approvals UL 486D listed E102356
Manufacturing Origin
Order No. UPC Description Conductor
Size
Min.
Order
Qty.
Case
Qty.
UF1-Splice Kit-6 Kits 054007-42920 UF Splice Kit-Standard includes 1.8" (45,7 mm) length connector/ 8.0" (203,2 mm) length of heavy
wall, adhesive lined heat shrink tube.
14–8 AWG 6 kits 6 kits
UF2-Splice Kit-6 Kits 054007-42921 UF Splice Kit-Stretcher offers an 11.5" (292,1 mm) length connector/ 20.0" (508,0 mm) length of
heavy wall, adhesive lined heat shrink tube. The Stretcher Kit is used in situations where a 7–10"
(17,8–25,4 cm) section of the cable has been damaged or destroyed.
14–8 AWG 6 kits 6 kits
3M™ Airport Lighting Connector Sealing
Kit
3M™ Airport Lighting Connector Sealing Kit IAL-3 is designed especially to meet the high demands on airport lighting connections. It meets specification for
sealing FAA Specification L-823 connectors.
Kit Includes:
Heat shrinkable sleeve
Cleaning pad
Instructions
RoHS 2011/65/EU Yes
Order No. UPC Sleeve Length Expanded/Recovered I.D. Case Qty.
IAL-3 054007-08862 16" (406,4 mm) 1.38/0.38" (35,1/9,7 mm) 30 kit/case
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand1.QXD 7/10/2013 8:13 PM Page 149
150 FAX: 800-245-0329
3M™ Heat Shrink Splice Kits
3M™ Heat Shrink Heavy-Wall Cable Sleeves ITCSN
The 3M™ Heat Shrink Heavy-Wall Cable Sleeves ITCSN are designed to provide reliable performance for electrical splices, connections and terminations,
as well as mechanical and environmental protection. ITCSN heavy-wall cable sleeves are cross-linked polyolefin. They are highly split resistant and fast
shrinking to provide rapid installation. The cut-to-length sleeves come standard with a factory-applied adhesive/sealant. Order any of several packaging
choices or look for the counter merchandiser assortment at a 3M authorized distributor.
Voltage Rating UL Rated to 600 V
3M Internal Test Rated to 1 kV
Material Polyolefin
Shrink Ratio 3:1
Operating Temperature -67°F to 230°F
(-55°C to 110°C)
Flame Retardant No
RoHS 2011/65/EU Yes
Agency Approvals
Manufacturing Origin
Order No. UPC Cable Size Length Expanded/Recovered
I.D. UL Spec. Adhesive
Included
Direct
Bury
Case
Qty.
ITCSN-0400-6"-Black-25 Pcs 054007-08887 12-6 AWG 6" (152,4 mm) 0.40"/0.15"
(10,2/3,8 mm)
UL 486D Yes Yes 25
ITCSN-0400-6"-Black-100 Pcs 054007-08963 12-6 AWG 6" (152,4 mm) 0.40"/0.15"
(10,2/3,8 mm)
UL 486D Yes Yes 100
ITCSN-0400-6"-Black-12-3 Pc Pks 051128-60075 12-6 AWG 6" (152,4 mm) 0.40"/0.15"
(10,2/3,8 mm)
UL 486D Yes Yes 3/pk,
12 pks
ITCSN-0400-6"-Red-12-3 Pc Pks 051128-60076 12-6 AWG 6" (152,4 mm) 0.40"/0.15"
(10,2/3,8 mm)
N/A Yes No 3/pk,
12 pks
ITCSN-0400-48"-Black-5 Pcs 054007-08902 12-6 AWG 48" (1,22 m) 0.40"/0.15"
(10,2/3,8 mm)
UL 486D Yes Yes 5
ITCSN-0400-48"-Black-20 Pcs 054007-08964 12-6 AWG 48" (1,22 m) 0.40"/0.15"
(10,2/3,8 mm)
UL 486D Yes Yes 20
ITCSN-0400-25'-Black-Reel 054007-08886 12-6 AWG 25' (7,62 m) 0.40"/0.15"
(10,2/3,8 mm)
N/A No No 1
ITCSN-0800-6"-Black-25 Pcs 054007-40067 8-1/0 AWG 6" (152,4 mm) 0.80"/0.20"
(20,3/5,1 mm)
UL 486D Yes Yes 25
ITCSN-0800-6"-Black-100 Pcs 054007-08965 8-1/0 AWG 6" (152,4 mm) 0.80"/0.20"
(20,3/5,1 mm)
UL 486D Yes Yes 100
ITCSN-0800-6"-Black-12-3 Pc Pks 051128-60077 8-1/0 AWG 6" (152,4 mm) 0.80"/0.20"
(20,3/5,1 mm)
UL 486D Yes Yes 3/pk,
12 pks
ITCSN-0800-6"-Red-12-3 Pc Pks 051128-60078 8-1/0 AWG 6" (152,4 mm) 0.80"/0.20"
(20,3/5,1 mm)
N/A Yes No 3/pk,
12 pks
ITCSN-0800-9"-Black-25 Pcs 054007-08890 8-1/0 AWG 9" (228,6 mm) 0.80"/0.20"
(20,3/5,1 mm)
UL 486D Yes Yes 25
ITCSN-0800-9"-Black-100 Pcs 054007-08966 8-1/0 AWG 9" (288,6 mm) 0.80"/0.20"
(20,3/5,1 mm)
UL 486D Yes Yes 100
pcs/cs
ITCSN-0800-12"-Black-25 Pcs 054007-08889 8-1/0 AWG 12" (304,8 mm) 0.80"/0.20"
(20,3/5,1 mm)
UL 486D Yes Yes 25
pcs/cs
ITCSN-0800-12"-Black-100 Pcs 054007-08967 8-1/0 AWG 12" (304,8 mm) 0.80"/0.20"
(20,3/5,1 mm)
UL 486D Yes Yes 100
ITCSN-0800-48"-Black-5 Pcs 054007-08903 8-1/0 AWG 48" (1,22 m) 0.80"/0.20"
(20,3/5,1 mm)
UL 486D Yes Yes 5
ITCSN-0800-48"-Black-20 Pcs 054007-08968 8-1/0 AWG 48" (1,22 m) 0.80"/0.20"
(20,3/5,1 mm)
UL 486D Yes Yes 20
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand1.QXD 7/10/2013 8:13 PM Page 150
PHONE: 800-245-3573 www.3M.com/Electrical 151
3M™ Heat Shrink Splice Kits
3M™ Heat Shrink Heavy-Wall Cable Sleeves ITCSN (continued)
Order No. UPC Cable Size Length Expanded/Recovered
I.D. UL Spec. Adhesive
Included
Direct
Bury
Case
Qty.
ITCSN-0800-48"-Red-20 Pcs 051128-55500 8-1/0 AWG 48" (1,22 m) 0.80"/0.20"
(20,3/5,1 mm)
N/A Yes No 20
ITCSN-0800-25'-Black-Reel 054007-08888 8-1/0 AWG 25' (7,62 m) 0.80"/0.20"
(20,3/5,1 mm)
N/A No No 1
ITCSN-1100-6"-Black-25 Pcs 054007-08894 2-4/0 AWG 6" (152,4 mm) 1.10"/0.37"
(27,9/9,4 mm)
UL 486D Yes Yes 25
ITCSN-1100-6"-Black-100 Pcs 054007-08969 2-4/0 AWG 6" (152,4 mm) 1.10"/0.37"
(27,9/9,4 mm)
UL 486D Yes Yes 100
ITCSN-1100-9"-Black-25 Pcs 054007-08893 2-4/0 AWG 9" (228,6 mm) 1.10"/0.37"
(27,9/9,4 mm)
UL 486D Yes Yes 25
ITCSN-1100-9"-Black-100 Pcs 054007-08970 2-4/0 AWG 9" (228,6 mm) 1.10"/0.37"
(27,9/9,4 mm)
UL 486D Yes Yes 100
ITCSN-1100-9"-Black-12-3 Pc Pks 051128-60079 2-4/0 AWG 9" (228,6 mm) 1.10"/0.37"
(27,9/9,4 mm)
UL 486D Yes Yes 3/pk,
12 pks
ITCSN-1100-9"-Red-12-3 Pc Pks 051128-60080 2-4/0 AWG 9" (228,6 mm) 1.10"/0.37"
(27,9/9,4 mm)
N/A Yes No 3/pk,
12 pks
ITCSN-1100-12"-Black-10 Pcs 054007-08892 2-4/0 AWG 12" (304,8 mm) 1.10"/0.37"
(27,9/9,4 mm)
UL 486D Yes Yes 10
ITCSN-1100-12"-Black-100 Pcs 054007-08971 2-4/0 AWG 12" (304,8 mm) 1.10"/0.37"
(27,9/9,4 mm)
UL 486D Yes Yes 100
ITCSN-1100-48"-Black-5 Pcs 054007-08904 2-4/0 AWG 48" (1,22 m) 1.10"/0.37"
(27,9/9,4 mm)
UL 486D Yes Yes 5
ITCSN-1100-48"-Black-20 Pcs 054007-08972 2-4/0 AWG 48" (1,22 m) 1.10"/0.37"
(27,9/9,4 mm)
UL 486D Yes Yes 20
ITCSN-1100-25'-Black-Reel 054007-08891 2-4/0 AWG 25' (7,62 m) 1.10"/0.37"
(27,9/9,4 mm)
N/A No No 1
ITCSN-1500-9"-Black-10 Pcs 054007-08897 3/0 AWG-
400 kcmil
9" (228,6 mm) 1.50"/0.50"
(38,1/12,7 mm)
UL 486D Yes Yes 10
ITCSN-1500-9"-Black-50 Pcs 054007-08973 3/0 AWG-
400 kcmil
9" (228,6 mm) 1.50"/0.50"
(38,1/12,7 mm)
UL 486D Yes Yes 50
ITCSN-1500-9"-Black-12-3 Pc Pks 051128-60081 3/0 AWG-
450 kcmil
9" (228,6 mm) 1.50"/0.50"
(38,1/12,7 mm)
UL 486D Yes Yes 3/pk,
12 pks
ITCSN-1500-12"-Black-10 Pcs 054007-08896 3/0 AWG-
400 kcmil
12" (304,8 mm) 1.50"/0.50"
(38,1/12,7 mm)
UL 486D Yes Yes 10
ITCSN-1500-12"-Black-50 Pcs 054007-08974 3/0 AWG-
400 kcmil
12" (304,8 mm) 1.50"/0.50"
(38,1/12,7 mm)
UL 486D Yes Yes 50
ITCSN-1500-48"-Black-5 Pcs 054007-08905 3/0 AWG-
400 kcmil
48" (1,22 m) 1.50"/0.50"
(38,1/12,7 mm)
UL 486D Yes Yes 5
ITCSN-1500-48"-Black-20 Pcs 054007-08975 3/0 AWG-
400 kcmil
48" (1,22 m) 1.50"/0.50"
(38,1/12,7 mm)
UL 486D Yes Yes 20
ITCSN-1500-25'-Black-Reel 054007-08895 3/0 AWG-
450 kcmil
25' (7,62 m) 1.50"/0.50"
(38,1/12,7 mm)
N/A No No 1
ITCSN-2000-9"-Black-10 Pcs 054007-08900 250-750 kcmil 9" (228,6 mm) 2.00"/0.65"
(50,8/16,5 mm)
UL 486D Yes Yes 10
ITCSN-2000-9"-Black-50 Pcs 054007-08976 250-750 kcmil 9" (228,6 mm) 2.00"/0.65"
(50,8/16,5 mm)
UL 486D Yes Yes 50
ITCSN-2000-12"-Black-10 Pcs 054007-08899 250-750 kcmil 12" (304,8 mm) 2.00"/0.65"
(50,8/16,5 mm)
UL 486D Yes Yes 10
ITCSN-2000-12"-Black-50 Pcs 054007-08977 250-750 kcmil 12" (304,8 mm) 2.00"/0.65"
(50,8/16,5 mm)
UL 486D Yes Yes 50
ITCSN-2000-12"-Black-12-3 Pc Pks 051128-60082 250-750 kcmil 12" (304,8 mm) 2.00"/0.65"
(50,8/16,5 mm)
UL 486D Yes Yes 3/pk,
12 pks
ITCSN-2000-48"-Black-5 Pcs 054007-08906 250-750 kcmil 48" (1,22 m) 2.00"/0.65"
(50,8/16,5 mm)
UL 486D Yes Yes 5
ITCSN-2000-48"-Black-20 Pcs 054007-08978 250-750 kcmil 48" (1,22 m) 2.00"/0.65"
(50,8/16,5 mm)
UL 486D Yes Yes 20
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand1.QXD 7/10/2013 8:13 PM Page 151
152 FAX: 800-245-0329
3M™ Heat Shrink Splice Kits
3M™ Heat Shrink Heavy-Wall Cable Sleeves ITCSN (continued)
Order No. UPC Cable Size Length Expanded/Recovered
I.D. UL Spec. Adhesive
Included
Direct
Bury
Case
Qty.
ITCSN-2000-25'-Black-Reel 054007-08898 250-750 kcmil 25' (7,62 m) 2.00"/0.65"
(50,8/16,5 mm)
N/A No No 1
ITCSN-3000-12"-Black-10 Pcs 054007-08901 600-1250 kcmil 12" (304,8 mm) 3.00"/1.00"
(76,2/25,4 mm)
N/A Yes No 10
ITCSN-3000-12"-Black-50 Pcs 054007-08979 600-1250 kcmil 12" (304,8 mm) 3.00"/1.00"
(76,2/25,4 mm)
N/A Yes No 50
ITCSN-3000-48"-Black-5 Pcs 054007-08907 600-1250 kcmil 48" (1,22 m) 3.00"/1.00"
(76,2/25,4 mm)
N/A Yes No 5
ITCSN-3000-48"-Black-20 Pcs 054007-08980 600-1250 kcmil 48" (1,22 m) 3.00"/1.00"
(76,2/25,4 mm)
N/A Yes No 20
ITCSN-4500-48"-Black-5 Pcs 051135-37979 1500-
2500 kcmil
48" (1,22 m) 4.50"/1.50"
(114,3/38,1 mm)
N/A Yes No 5
ITCSN-4500-48"-Black-20 Pcs 054007-08981 1500-
2500 kcmil
48" (1,22 m) 4.50"/1.50"
(114,3/38,1 mm)
N/A Yes No 20
ITCSN-6000-48"-Black-5 Pcs 051135-37980 2.1"-4.8" 48" (1,22 m) 6.00"/1.80"
(152,4/45,7 mm)
N/A Yes No 5
ITCSN-6000-48"-Black-20 Pcs 054007-08982 2.1"-4.8" 48" (1,22 m) 6.00"/1.80"
(152,4/45,7 mm)
N/A Yes No 20
3M™ Direct Bury Splice Kits
3M™ Direct Bury Splice Kit DBO/B-6
The 3M™ Direct Bury Splice Kit DBO/B-6 is used to electrically connect two or more pre–stripped copper wires and moisture seal the connection for direct
burial. The kit includes a 3M™ Performance Plus Wire Connector O/B+ and a high impact, UV-resistant polypropylene tube prefilled with moisture-resistant
grease.
Voltage 600 V
Splice Type Direct Bury
Application Temperature
Range
32–120°F (0–49°C)
Operating Temperature 221°F (105°C)
Flame Retardant Yes
RoHS 2011/65/EU Yes
Agency Approval
Order No. UPC Conductor
Size Common AWG Wire Combinations (CU only) Case
Qty.
DBO/B-6 KIT 051128-59075 18–10 AWG 2–3#16 sol/str; 2–3#14 sol/str; 2#12 sol/str; 1#14 to 1#12 sol/str; 1#18 to 1–2#14 sol/str; 1#18 to 1–2#12
sol/str; 1#16 to 1–2#14 sol/str; 1#16 to 1–2#12 sol/str
25 Kits
DBO/B-6 BULK 051128-59076 18–10 AWG 2–3#16 sol/str; 2–3#14 sol/str; 2#12 sol/str; 1#14 to 1#12 sol/str; 1#18 to 1–2#14 sol/str; 1#18 to 1–2#12
sol/str; 1#16 to 1–2#14 sol/str; 1#16 to 1–2#12 sol/str
100 Kits
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand1.QXD 7/10/2013 8:13 PM Page 152
PHONE: 800-245-3573 www.3M.com/Electrical 153
3M™ Direct Bury Splice Kits
3M™ Direct Bury Splice Kit DBR/Y-6
The 3M™ Direct Bury Splice Kit DBR/Y-6 is used to electrically connect two or more pre–stripped copper wires and moisture seal the connection for direct
burial. The kit includes a 3M™ Performance Plus Wire Connector R/Y+ and a high impact, UV-resistant polypropylene tube prefilled with moisture-resistant
grease.
Voltage 600 V
Splice Type Direct Bury
Application Temperature
Range
32–120°F (0–49°C)
Operating Temperature
Range
-40–221°F (-40–105°C)
Flame Retardant Yes
RoHS 2011/65/EU Yes
Agency Approval
Order No. UPC Conductor Size Common AWG Wire Combinations (CU only) Case
Qty.
DBR/Y-6 KIT 051128-58573 18–10 AWG 2–7#18; 2–6#16; 2–4#14; 2–4#12; 2–3#10; 1–3#12 w/ 1#18; 1–2#10 w/1#18; 1–2#10 w/1#12; 1–2#14
w/ 1#18
25 Kits
DBR/Y-6 BULK 051128-58574 18–10 AWG 2–7#18; 2–6#16; 2–4#14; 2–4#12; 2–3#10; 1–3#12 w/ 1#18; 1–2#10 w/1#18; 1–2#10 w/1#12; 1–2#14
w/ 1#18
100 Kits
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand1.QXD 7/10/2013 8:13 PM Page 153
3M Scotchcast 72—N Series Selection (Based on Conductor/Connector Bundle) wallow Inllllud mm mm: MVlBBC 22-16AWG MVMBCHHAAWG MVIUBC IZ-lUAWG Shielded Umnielded Shielded Unshielded Shielded unshielded Cables" Cables" Cables" Cables“ Cables“ Cables“ Kit Nu Nu N0 N0 Ni) Na N0 No Min ND ND N0 N0 60nd Palrs Omd. Falls Band. Pairs Cond, Pairs 00nd Falls Cond. Pairs 72—Nl " — — 6 3 — — 4 2 — — 3 — 727M? ‘8 9 32 VS 12 5 19 9 B 4 1 3 6 72-N3 42 21 75 37 24 12 45 22 14 7 27 13 72-N4 74 37 160 BO 50 25 90 45 4D 20 $4] 30 727N5 I40 70 200 100 120 50 150 80 Ill] 50 100 50 72-N6 360 130 400 200 220 l 10 250 125 180 90 200 100 'Nunslusldeu cable only. “figures based on lMSA Cable specmeafions. Multiple Condudor Nonshielded Signal & Contvol Cable Multiple Conductor Shielded Signal El Control Cable Enigma
154 FAX: 800-245-0329
3M™ Resin Splice Kits
3M™ Scotchcast™ Inline Splice Kits, 72-N Series
The 3M™ Scotchcast™ Inline Splicing Kits 72-N Series is a series of rigid body splices tailored for joining signal and control cables rated up to 1000 V. The
kits are designed to accommodate shielded or unshielded constructions of plastic or rubber-jacketed cables. Six kit sizes cover a range of cables up to 100-
pair (200 conductors) 10 AWG or 200-pair (400 conductors) 22 AWG.
Connectors are not included, order separately. Each kit contains sufficient material to make one splice, excluding connectors.
Voltage 1000 V or less
Number of Conductors Multiple Conductors
Cable/Shielding Type Shielded and Non-Shielded Signal and
Control Cable
Splice Type Resin
Applications
To splice signal and control cables
rated up to 1000 V. Inline splicing of
shielded and non-shielded cables in
direct burial applications.
RoHS 2011/65/EU Yes
Order No. UPC Shielded/Non-Shielded Molded Body
Length Cable O.D. Case Qty.
72-N1 054007-10623 Non-Shielded 7.125"
(181,0 mm)
0.250"-0.625"
(6,4-15,9 mm)
10
72-N2 054007-10625 Shielded 10.562"
(268,3 mm)
0.500"-1.000"
(12,7-25,4 mm)
10
72-N3 054007-10627 Shielded 15.438"
(392,1 mm)
0.625"-1.500"
(15,9-38,1 mm)
10
72-N4 054007-10629 Shielded 15.625"
(396,9 mm)
1.000"-2.000"
(25,4-50,8 mm)
1
72-N5 054007-10631 Shielded 20.312"
(515,9 mm)
1.250"-2.250"
(31,8-57,2 mm)
1
72-N6 054007-10633 Shielded 25"
(635,0 mm)
1.250"-3.250"
(31,8-82,6 mm)
1
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:48 PM Page 154
3M“ Scotchcasf" 78-R Series Connector Selection Insulated Butt Connenus P‘gtall Connectors Tap Connectors MVI BBC MV‘ JEC MVI 050 “V" “R" 557 558 560 562 22-IBAWG 16-TAAWG 1240ch 15-12AWG IA-ioAWG 22-18AWG 2245ch m-MAWG iz-tOAWG Kit N0. No No No No No No No No Nn No N0 Na Na ND No No Mn N.“ Bond. Pans Cund. Paws Cmd. Palrs [10nd Pans Cum. Palrs 00nd. Pans Cami, Paws Cond. lers Calld WIS 78-R1 w 20 26 13 16 B 5 4 5 2 15 7 ID 5 8 4 6 3 78412 66 33 45 22 26 13 20 10 10 5 30 15 20 ID 16 B 12 6 7BR} 160 BO 110 55 70 35 5O 25 28 14 EU 40 50 25 40 20 35 15 78414 300 ‘50 WED 90 “D 55 84 42 ED 341 142 7| IUD 50 80 AU 68 34 78-R5 550 275 320 160 200 100 174 87 120 90 260 130 200 100 160 80 130 65 Note' Above figures based on IMSA cable speclflcanuns‘ MulxipleConduam Nonshielded Signal & Control Came Mulnpls Condunovsmeldad S‘gnamContwlcable
PHONE: 800-245-3573 www.3M.com/Electrical 155
3M™ Resin Splice Kits
3M™ Scotchcast™ Re-Enterable Signal and Control Cable Splice Kits 78-R Series
3M™ Scotchcast™ Re-Enterable Signal and Control Cable Splice Kits 78-R Series make inline or tap splices on shielded or nonshielded, plastic- and
rubber-jacketed, signal and control (or power) cable rated up to 1 kV.
Connectors are not included, order separately. Each kit contains sufficient material to make one splice.
Voltage 1000 V or less
Number of Conductors Multiple Conductor
Cable/Shielding Type Shielded and Non-Shielded Signal and
Control Cable
Splice Type Resin
RoHS 2011/65/EU Yes
Applications
Inline wye, "x," or butt splicing of
shielded or non-shielded cable in
direct bury applications.
Order No. UPC Kit Size, L x I.D. Cable O.D., Run Cable O.D., Tap Case Qty.
78-R1 051128-55115 12.50" x 2.75" (318 x 70 mm) 0.25"-1.00" (6,4-25,4 mm) 0.25"-1.00" (6,4-25,4 mm) 1
78-R2 051128-55116 24.50" x 2.75" (622 x 70 mm) 0.25"-1.00" (6,4-25,4 mm) 0.25"-1.00" (6,4-25,4 mm) 1
78-R3 051128-55117 24.50" x 3.81" (622 x 97 mm) 0.50"-1.50" (12,7-38,1 mm) 0.50"-1.00" (12,7-25,4 mm) 1
78-R4 051128-55118 24.50" x 4.81" (622 x 122 mm) 0.50"-2.00" (12,7-50,8 mm) 0.50"-1.75" (12,7-44,5 mm) 1
78-R5 051128-55119 26.50" x 6.00" (673 x 152 mm) 1.00"-2.50" (25,4-63,5 mm) 1.00"-2.50" (25,4-63,5 mm) 1
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:48 PM Page 155
156 FAX: 800-245-0329
3M™ Resin Splice Kits
3M™ Scotchcast™ Multi-Mold Resin Splice Kits 85 Series
The 3M™ Scotchcast™ Multi-Mold Resin Splice Kit 85 Series are used to electrically insulate odd-sized and odd-shaped splices on cables rated through 1
kV. These flexible plastic molds are easily formed around splices. Within 30 minutes after the resin has been poured, the splice is ready for service – above
ground or buried.
The 85-14CP splice is specifically designed for use in cathodic protection with 3M™ Scotchcast™ Electrical Insulating Resin 4.
Each kit makes one splice. Connectors are not included and must be ordered separately.
* Single Conductor Cable
Voltage 1000 V or less
Number of Conductors Single; Multiple
Cable/Shielding Type Non-shielded
Splice Type Resin
Applications
Splice cables rated up to 1000 V for
inline, wye, or 4-way non-shielded
cable in direct bury applications.
RoHS 2011/65/EU Yes
Order No. UPC
Max.
Conductor,
Split Bolt
Max. Conductor, H-
or C-Tap
Compression
Max.
Conductor,
Inline
Compression
Max. Connector Size (height
+ width)
Max. Sheath
Opening
Max. Cable O.D., Wye
or 4-Way
Case
Qty.
85-10 054007-11846 8 AWG
(stranded)
4 AWG (stranded) - 1-3/4" (44,5 mm) 3-1/2" (88,9 mm) Run & Tap: 7/16" (11,1
mm)
10
85-12 054007-11847 1 AWG
(stranded)
2/0 AWG (stranded) - 2-3/4" (69,9 mm) 3-1/2" (88,9 mm) Run & Tap: 3/4" (19,1
mm)
10
85-14 054007-11848 2/0 AWG
(stranded)
4/0 AWG (stranded) - 3-1/4" (82,6 mm) 6-1/2" (165,1 mm) Run & Tap: 7/8" (22,2
mm)
10
85-14-CP* 054007-31927 2/0 AWG
(stranded)
4/0 AWG (stranded) - 3-1/4" (82,6 mm) 9" (228,6 mm) Run & Tap: 7/8" (22,2
mm)
10
85-16 054007-02403 250 kcmil
(run)
2/0 AWG
(tap)
500 kcmil (run)
4/0 AWG (tap)
750 kcmil Split Bolt: 3-3/4" (95,3 mm)
H- or C-Tap Compression: 6"
(152,4 mm)
9" (228,6 mm) Run & Tap: 7/8" (22,2
mm)
Inline: 1-1/2" (38.1
mm)
10
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:48 PM Page 156
Slngle Conducmv Gable if ~‘ Single Conductor Cable Multiple Conductor, to 1000 Volt, cable
PHONE: 800-245-3573 www.3M.com/Electrical 157
3M™ Resin Splice Kits
3M™ Scotchcast™ Wye Resin Splice Kit 90-B1
3M™ Scotchcast™ Wye Resin Splice Kit 90-B1 insulates and moisture-seals wye splices made with the split-bolt type connectors on cables rated through
1 kV.
Each kit makes one splice. Connectors must be ordered separately.
Voltage 1000 V or less
Number of Conductors Single; Multiple
Cable/Shielding Type Single Conductor Cable, Multiple
Conductor Cable
Splice Type Resin
Applications
Insulation and protection of wye
splices made with split bolt connectors
on cable rated to 1000 V.
RoHS 2011/65/EU Yes
Order No. UPC Cable O.D. – Run Cable O.D. (Max.) – Tap Connector Size (Max.) –
Split Bolt
Connector Size (Max.) –
Crimped
Case
Qty.
90-B1 054007-25115 0.50"-0.812"
(12,7-20,1 mm)
0.375" (9,5 mm) 1/0 AWG 2/0 AWG 10
3M™ Scotchcast™ Flexible Power Cable Tap Splice Kit 82-BF1
3M™ Scotchcast™ Splice Kit 82-BF1 is for tap splices on non-shielded portable power cables and cords with copper conductors rated up to 1 kV. It can be
used on single- conductor or multiple-conductor cables using a compression (crimp) “C” tap connector.
The 82-BF1 molds are removable and reusable. The 82-BF1 splice kit creates a permanent splice as recognized by the Mine Safety and Health
Administration (07-KA060002-MSHA).
Each kit makes one splice.
* Base selection on cable O.D. range.
Voltage 1000 V or less
No. of Conductors Multiple (600 V), Single (1000 V)
Cable/Shielding Type Non-Shielded Portable Power Cables
and Cords
Splice Type Resin
Applications
Making tap splices on non-shielded
portable power cables and cords rated
to 1000 V.
RoHS 2011/65/EU Yes
Agency Approval MSHA
Order No. UPC Cable O.D. Voltage Conductor Size Case
Qty.
82-BF1 051128-59175 For Single: 0.25"-0.80" (6-20 mm)
For Multiple: 0.25"-0.80" (6-20 mm)
For Single: 1 kV
For Multiple: 600 V
For Single: 1/0 AWG (50 mm²)
For Multiple: *
10
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:48 PM Page 157
Nunshlelded Dry Cab‘e Mumple Conduuov Porxab‘e Cable Nunshlelded Dry Cab‘e Mumple Conduuov Porxab‘e Cable
158 FAX: 800-245-0329
3M™ Resin Splice Kits
3M™ Scotchcast™ Inline Resin Power Cable Splice Kits 82-A Series
Use the 3M™ Scotchcast™ Inline Resin Splice Kits 82-A Series to insulate and seal single conductor, unshielded cable splices through 5 kV and multiple
conductor cables through 1 kV. Designed for use in weather-exposed or direct-burial locations. UL listed for direct burial and submerged applications up to
600 V and 90°C. For use with UL listed connectors only.
Important: Use insulation jacket or connector O.D. for final ordering criteria.
*Conductor size is 3/0 AWG–500 kcmil when using a 3M™ Scotchlok™ Copper Compression Connector 10014.
Voltage
600 V or less (Direct Bury and
Submerged Applications); 1000 V
(Multiple); 5 kV (Single)
Number of Conductors Single and Multiple
Cable/Shielding Type
Multiple Conductor Portable Cable,
Non-Shielded, Single Conductor
Portable Cable
Splice Type Resin
RoHS 2011/65/EU Yes
Agency Approvals Certified for 600 V or less
Order No. UPC Conductor Size Max. Connector O.D. Max. Cable O.D. Max. Sheath Opening (L) Case Qty.
82-A 054007-25016 10-2 AWG 0.406" (10,3 mm) 0.75" (19,1 mm) 4.5" (114,3 mm) 10
82-A1 054007-25024 18-2 AWG 0.406" (10,3 mm) 0.625" (15,9 mm) 4.5" (114,3 mm) 10
82-A2 054007-25032 2-3/0 AWG 0.625" (15,9 mm) 1.00" (25,4 mm) 6.0" (152,4 mm) 10
82-A3 054007-25040 3/0 AWG-400 kcmil* 1.00" (25,4 mm) 1.56" (39,7 mm) 9.0" (228,6 mm) 10
3M™ Scotchcast™ Wye Resin Splice Kit 82-B1
3M™ Scotchcast™ Wye Resin Splice Kit 82-B1 insulates and seals wye splices for compression tap connectors (e.g., C-tap or H-tap) rated for cables up to
5 kV. Use on nonshielded cables through 5 kV and on multiple conductor cables through 1 kV.
This kit will accommodate both split bolt and crimped conductors. Each kit makes one splice. Connectors are not included in the kit and must be purchased
separately.
Voltage 1000 V; 5 kV
Number of Conductors Multiple (1000 V), Single (5 kV)
Cable/Shielding Type
Multiple Conductor Portable Cable,
Non-Shielded, Single Conductor
Portable Cable
Splice Type Resin
RoHS 2011/65/EU Yes
Order No. UPC Voltage Rating Cable O.D. Max. Conductor Size – Split Bolt Max. Conductor Size – Crimped Case
Qty.
82-B1 054007-25057 5 kV (Single); 1 kV
(Multiple)
0.25"-0.625" (6,4-16,0
mm)
4 AWG 2 AWG 10
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:48 PM Page 158
Nonswelaea Dry came -:'I Nunshielded Wetov Dry (able Smgle Canduuor Pcnab‘e Cab‘e Mumple Conduum Portable Came
PHONE: 800-245-3573 www.3M.com/Electrical 159
3M™ Resin Splice Kits
3M™ Scotchcast™ Flexible Power Cable Inline Splicing Kits 82-F Series
3M™ Scotchcast™ Flexible Power Cable Inline Splicing Kits 82-F Series are a series of flexible inline splices for use on non-shielded portable power cables
and cords. They are designed to be used on single and multiple conductor cables and cords rated up to 1000 Volts (600/2000 Volts mine portable cable
rating). The 82-F Series accommodates a 1/C cable rated up to 5 kV. The splices accommodate 1/C cables sized up to 4/0 for inline splicing. Multi-
conductor sizing is based on a cable diameter range of up to 1.2" for inline splicing.
The splice kits are based on 3M™ Scotchcast™ Flame Retardant Compound 2130 for toughness, flexibility, moisture sealing and flame retardancy. They
are permanent splices as assigned by the Mine Safety and Health Administration (07-KA060002-MSHA). The completed splices are designed for use in
weather-exposed, direct burial or submerged locations. 3M™ Scotchcast™ Inline Splice Kits for Flexible Power Cable 82-F1 are for use on unshielded,
portable power cables. The kits are rated up to 5 kV for 1/C and up to 1 kV for multiple conductors.
Each kit makes one splice. Connectors are not included in the kit, and must be purchased separately.
*Mine portable cable rating of 600/2000 V
**Base selection on cable O.D. range
Voltage 1000 V; 5 kV
Number of Conductors Multiple (1000 V), Single (5 kV)
Cable/Shielding Type
Non-Shielded Dry and Wet Cables,
Single and Multiple Conductor Portable
Cables
Splice Type Resin
RoHS 2011/65/EU Yes
Agency Approvals MSHA
Order No. UPC Cable O.D. Connection Max. O.D. Voltage Conductor Size Case
Qty.
82-F1 051128-59176 For Single: 0.25"-0.80" (6–20 mm)
For Multiple: 0.25"-0.80" (6-20 mm)
For Single: 0.62" (16 mm)
For Multiple: 0.90" (23 mm)
For Single: 5 kV
For Multiple: 1 kV*
For Single: 6-1/0 AWG (16-50
mm²)
For Multiple: **
10
82-F2 051128-59177 For Single: 0.80"-1.20" (20-30 mm)
For Multiple: 0.80"-1.20" (20-30 mm)
For Single: 0.82" (21 mm)
For Multiple: 1.30" (33 mm)
For Single: 5 kV
For Multiple: 1 kV*
For Single: 2/0-4/0 AWG (70-
95 mm²)
For Multiple: **
10
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:48 PM Page 159
160 FAX: 800-245-0329
3M™ Resin Splice Kits
3M™ Scotchcast™ Flame-Retardant Compound 2131
3M™ Scotchcast™ Flame-Retardant Compound 2131 is a two-part polyurethane resin designed to replace the cable jacket when splicing or repairing mine
and portable cables. Its unique formulation makes it particularly suited to withstand the rugged conditions under which mine and portable cables must
operate. When used in accordance with the appropriate kit configuration, Compound 2131 conforms to MSHA Part 7, Title 30 CFR.
Flame-Retardant Compound 2131 is also used as the insulating material for cable splices operating at up to 1000 volts and designed for 194ºF (90ºC) at
continuous use and for 266ºF (130ºC) at temporary, overload temperature.
3M™ Scotchcast™ Flame-Retardant Compound 2131 comes in two sizes of 2-part pouch containers, as well as separate 5 gallon jugs for both Part A and
Part B. (Note: 2.1 parts of B required for every 1 part of A by weight.)
Voltage 1000 Volts or less
Cure Time 16 to 24 Hours at 70ºF (21ºC)
Energize Time Immediately
Max. Operating Temperature 194ºF (90ºC) continuous
Color Black
RoHS 2011/65/EU Yes
Used in these kits 5750; 5760; 5831; 5832; 82-F1; 82-
F2; 82-BF1; M-20; M-30; M-40
Order No. UPC Packaging Description Weight Volume in³ (cm³) Case Qty.
2131B 051128-59166 2-part pouch 7.5 oz (213 g) 10.6 (175) 10
2131C 051128-59167 2-part pouch 21.5 oz (612 g) 30.6 (502) 10
2131-Part A 5 Gal 051128-59181 5 gallon jug, Part A 44.5 lb (20.1 kg) 1 pail
2131-Part B 5 Gal 051128-59182 5 gallon jug, Part B 46.5 lb (21 kg) 1 pail
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:50 PM Page 160
PHONE: 800-245-3573 www.3M.com/Electrical 161
3M™ Resin Splice Kits
3M™ Scotchcast™ Potting Kit 2136
The 3M™ Scotchcast™ Potting Kit 2136 is designed to provide protection against corrosion and possible deteriorating effects of fresh swimming pool or
fountain water and sunlight by reliably encapsulating the 8 AWG ground connection in a wet-niche shell as required by NEC® when using rigid, non-metallic
conduit in the installation of wet-niche
underwater lighting fixtures. Scotchcast 2136 compound is UL Listed as a potting compound for swimming pool, fountain, or spa equipment and is for use
only where adhering to copper, copper alloy and stainless steel materials.
3M™ Scotchcast™ Potting Compound 2136 is a thixotrophic polyurethane resin, designed to resist dripping or sagging, and contained in an easy mix 1.5
oz. closed mixing pouch. At temperatures above 40°F (18°C) the compound will firm up in minutes. Encapsulated connections should be allowed to cure for
4 hours prior to submersion.
Voltage Up to 1000 Volts;
UL Listed up to 600 Volts
Cure Time 4 Hours at 70°F (21°C)
Energize Time Immediately
Max. Operating Temperature UL Listed 20L02 220°F (105°C)
Color Black
RoHS 2011/65/EU Yes
Order No. UPC Material Weight, oz (g) Containers per Case
2136 051128-59190 Potting Compound 1.50 (42,5) 10
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:50 PM Page 161
3MTM Resin Pressure System Components Voltage Class Number 0' Cnndurlors ulallon Mal ll Cnnilgulatlm 5 and 8 W ”C, mulli/G and Non-shielded, Tane Solid Dieleclric lEPR, XLPE, elm), PILB and lnl‘l‘EV We and Transilions lrnrn Shielded. Wm Shielded, Iransilinns from PILC in Snlid Dieleclric Tee Resin Splice Mum-m sinnle condnclor Unishield®, LC. CN and Jon 15 W 1/0. llllllIi/C and Tape Shielnefl. Wire Solid Dieleclric (EPIL )(LPE. em). PILC and Illline and Transilinns lrnrn Shielded, Unislrisld®, transitions nun Pill? in Snllu Dieleclrir: Tee Tanecast'" Saline Mum-m single conductor LC. CM and JUN 25 W 1/0, mulli/C and TED! Shielded, Wire Snlid Dielectric lEPR, XLPE, ml, FILE and Inline and Transilions {mm Shielded‘ UniSnielw, Iransilinns from PILC in Snlid Dieleclric Tee TaneCaer Snlice Mum-m single cunflumnr LC. EN arm JCN These Resin and 3M” lapecaslm Splicas will also wnrk MI scour slransd conductors.
162 FAX: 800-245-0329
3M™ Resin Splice Kits
3M™ Resin Pressure System Components
The 3M™ Resin Pressure System is comprised of several components used for constructing splices or splice
jackets on medium voltage power cables for harsh environments. 3M™ Scotchcast™ Electrical Insulating
Resin 4 is a key component of the system, which can be used as the primary insulation for shielded and non-
shielded splices rated up to 8 kV. The system is also available as a resin-jacketed tape splice (TapeCast) rated
up to 25 kV. The resin is a two-part epoxy, packaged in a special Unipak container that provides the exact
mixing ratio for making a strong, dependable and long-lasting splice or splice jacket. The versatile resin system
accommodates a variety of splice configurations and cables.
A resin pressure system splice is suitable for submerged locations (e.g. manholes and vaults), underground
direct burial, and aerial applications. All parts are ordered separately. Contact your local 3M representative for
further details.
Order No. UPC Product Name Description Case
Qty.
E-4 054007-25701 3M™ Resin Pressure Gun E-4 Reusable resin pressure gun used for constructing a resin pressure splice. 1
P-1B 054007-11857 3M™ Scotchcast™ Injection
Fitting P-1B
Enables safe transfer of resin through gun and into the joint. 5
P-3 054007-25735 3M™ Scotchcast™ Spacer
Tape P-3
Used to build up voids in odd shaped splices, ensures full resin coverage, and forms a liquid tight
mold. 27' x 1-1/2" (8,23 m x 38,1 mm)
50
P-4 054007-25743 3M™ Cloth Tape P-4 Restricter Tape, 1" x 30' on 1" core. 50
P-5B 054007-11858 3M™ Scotchcast™ Injection
Nozzle P-5B
Used to puncture compound bag and pipe compound to P-1B injection fitting. Mastic seal prevents
spillage.
5
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:50 PM Page 162
8423—6E SIngIE Conducmr Cable
PHONE: 800-245-3573 www.3M.com/Electrical 163
3M™ Cold Shrink Splice Kits
3M™ Cold Shrink Connector Insulators 8420 and 8430 Series
3M™ Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3M’s proprietary cold shrink delivery system. Products are supplied
prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to
shrink into position forming a moisture-tight seal. The live memory action of the specially formulated EPDM material promotes a permanent, durable
environmental seal and insulation, with a typical operating temperature range from -40–194°F (-40–90°C).
The 8420 insulator meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV.
Important: Use insulation jacket or connector O.D. for final ordering criteria.
* Mastic pads included for cable O.D. build-up. ** Kit contains adapters. *** These sizes are listed for availability only and are not designed to be used as
primary insulation. These tubes are for conduit sealing and breakouts. ****Maximum connector length: 5.625"
"Point of Purchase" packaging designated by "P". Example: 8423-6P
Voltage 1000 V or less
Number of Conductors Single Conductor
Cable Type Low Voltage Single Conductor
Insulated Cable
Splice Type Cold Shrink
Applications
Primary electrical insulation for all
solid dielectric (rubber and plastic)
insulated wire and cable splicing rated
to 1000 V. Good for repairs and envi-
ronmental sealing for communication
and other non-electrical applications.
RoHS 2011/65/EU Yes
Agency Approvals ANSI C1191.1
Order No. UPC Typical Conductor Size Min. Cable Dia.
for Seal
Max. Dia. Insulator Cable or Connector
Covers
Max. Connector
Length
Relaxed Tube
Length
Case
Qty.
8423-6 054007-42146 6-4 AWG
(14-16 mm²)
0.31" (7,8 mm) 0.56" (14,2 mm) 2.0" (50,8 mm) 6.0" (152,4 mm) 10
8423-6P 054007-42864 6-4 AWG
(14-16 mm²)
0.31" (7,8 mm) 0.56" (14,2 mm) 2.0" (50,8 mm) 6.0" (152,4 mm) 10
8424-8** 054007-42390 10-1/0 AWG
(6-16 mm²)
0.10" (2,5 mm) 0.82" (20,9 mm) 3.0" (76,2 mm) 8.0" (203,2 mm) 10
8424-8P 054007-42865 10-1/0 AWG
(6-16 mm²)
0.10" (2,5 mm) 0.82" (20,9 mm) 3.0" (76,2 mm) 8.0" (203,2 mm) 10
8425-8 054007-42391 2-1/0 AWG
(35-50 mm²)
0.40" (10,1 mm) 0.82" (20,9 mm) 3.0" (76,2 mm) 8.0" (203,2 mm) 10
8425-8P 054007-42866 2-1/0 AWG
(35-50 mm²)
0.40" (10,1 mm) 0.82" (20,9 mm) 3.0" (76,2 mm) 8.0" (203,2 mm) 10
8426-9 054007-34457 2/0 AWG-250 kcmil
(70-125 mm²)
0.55" (13,9 mm) 1.18" (30,1 mm) 5.0" (127,0 mm) 9.0" (228,6 mm) 10
8426-9M* 054007-43436 2-4/0 AWG
(30-90 mm²)
0.40" (10,1 mm) 1.18" (30,1 mm) 5.0" (127,0 mm) 9.0" (228,6 mm) 10
8426-9P 054007-42867 2/0 AWG–250 kcmil
(70-125 mm²)
0.55" (13,9 mm) 1.18" (30,1 mm) 5.0" (127,0 mm) 9.0" (228,6 mm) 10
8426-11 054007-34458 2/0 AWG-250 kcmil
(70-125 mm²)
0.55" (13,9 mm) 1.18" (30,1 mm) 7.0" (177,8 mm) 11.0" (279,4 mm) 10
8427-6*** 054007-09915 - 0.67" (16,8 mm) 1.38" (35,1 mm) 2.0" (50,8 mm) 6.0" (152,4 mm) 10
8427-12 054007-34459 250-400 kcmil
(125-200 mm²)
0.67" (16,8 mm) 1.38" (35,1 mm) 8.0" (203,2 mm) 12.0" (304,8 mm) 10
8427-12P 054007-42868 250-400 kcmil
(125-200 mm²)
0.67" (16,8 mm) 1.38" (35,1 mm) 8.0" (203,2 mm) 12.0" (304,8 mm) 10
8427-16 054007-34460 250-400 kcmil
(125-200 mm²)
0.67" (16,8 mm) 1.38" (35,1 mm) 12.0" (304,8 mm) 16.0" (406,4 mm) 10
8428-6*** 054007-09916 - 0.95" (24,1 mm) 1.94" (49,2 mm) 2.0" (50,8 mm) 6.0" (152,4 mm) 10
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:50 PM Page 163
164 FAX: 800-245-0329
3M™ Cold Shrink Splice Kits
3M™ Cold Shrink Connector Insulators 8420 and 8430 Series (continued)
Order No. UPC Typical Conductor Size Min. Cable Dia.
for Seal
Max. Dia. Insulator Cable or Connector
Covers
Max. Connector
Length
Relaxed Tube
Length
Case
Qty.
8428-6M 051128-53828 450-800 kcmil
(240-400 mm²)
0.95” (24,1 mm) 1.94” (49,2 mm) 2.0” (50,8 mm) 6.0” (152,4 mm) 50
8428-8 051128-53711 500-800 kcmil
(300-400 mm²)
0.95" (24,1 mm) 1.94" (49,2 mm) 3.0" (76,2 mm) 8.0" (203,2 mm) 25
8428-12 054007-09056 500-800 kcmil
(300-400 mm²)
0.95" (24,1 mm) 1.94" (49,2 mm) 8.0" (203,2 mm) 12.0" (304,8 mm) 10
8428-12M 054007-43746 500-800 kcmil
(300-400 mm²)
0.95" (24,1 mm) 1.94" (49,2 mm) 8.0" (203,2 mm) 12.0" (304,8 mm) 10
8428-12P 054007-42869 500-800 kcmil
(300-400 mm²)
0.95" (24,1 mm) 1.94" (49,2 mm) 8.0" (203,2 mm) 12.0" (304,8 mm) 10
8428-18 054007-34461 500-800 kcmil
(300-400 mm²)
0.95" (24,1 mm) 1.94" (49,2 mm) 14.0" (355,6 mm) 18.0" (457,2 mm) 10
8429-6*** 054007-09917 - 1.27" (32,2 mm) 2.67" (67,8 mm) 2.0" (50,8 mm) 6.0" (152,4 mm) 10
8429-9**** 054007-09931 900-1000 kcmil
(500 mm²)
1.27" (32,2 mm) 2.67" (67,8 mm) 5.0" (127,0 mm) 9.0" (228,6 mm) 10
8429-9M 054007-42018 900-1000 kcmil
(500 mm²)
1.27” (32,2 mm) 2.67” (67,8 mm) 5.0” (127,0 mm) 9.0” (228,6 mm) 10
8429-12 054007-42389 900-1000 kcmil
(500 mm²)
1.27" (32,2 mm) 2.67" (67,8 mm) 8.0" (203,2 mm) 12.0" (304,8 mm) 10
8429-15 054007-44198 900-1000 kcmil
(500 mm²)
1.27" (32,2 mm) 2.67" (67,8 mm) 11.0" (279,4 mm) 15.0" (381,0 mm) 10
8429-18 054007-34462 900-1000 kcmil
(500 mm²)
1.27" (32,2 mm) 2.67" (67,8 mm) 14.0" (355,6 mm) 18.0" (457,2 mm) 10
8430-9*** 054007-42147 1250-2000 kcmil 1.68" (42,6 mm) 3.69" (93,7 mm) 5.0" (127,0 mm) 9.0" (228,6 mm) 10
8430-18 054007-42388 1250-2000 kcmil 1.68" (42,6 mm) 3.69" (93,7 mm) 14.0" (355,6 mm) 18.0" (457,2 mm) 10
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:50 PM Page 164
’\
PHONE: 800-245-3573 www.3M.com/Electrical 165
3M™ Cold Shrink Splice Kits
3M™ Cold Shrink Silicone Insulators 8440 Series (1000 Volts or less)
3M™ Cold Shrink Silicone Insulators 8440 Series are insulating sleeves made from a specially formulated high-temperature silicone rubber with a typical
operating temperature range of -67–500°F (-55–260°C).
Voltage 1000 V or less
No. of Conductors Single Conductor
Cable Type Low Voltage Single Conductor
Insulated Cable
Splice Type Cold Shrink
Application
Primary electrical insulation for all
solid dielectric (rubber and plastic)
insulated wire and cable splices rated
to 1000 V.
RoHS 2011/65/EU Yes
Order No. UPC Typical Conductor Size Min. Cable Diameter for
Seal
Max. Diameter Insulator Cable or Connector
Covers
Relaxed Tube
Length
Case
Qty.
8443-2 054007-09485 6–2 AWG
(14–30 mm²)
0.30" (7,6 mm) 0.56" (14,2 mm) 2.00" (50,8 mm) 12
8443-3 051128-57098 6–2 AWG
(14–30 mm²)
0.30" (7,6 mm) 0.56" (14,2 mm) 2.00" (50,8 mm) 12
8443-6.5 054007-09482 6–2 AWG
(14–30 mm²)
0.30" (7,6 mm) 0.56" (14,2 mm) 6.50" (165,1 mm) 12
8445-2.5 054007-09486 2–1/0 AWG
(35–50 mm²)
0.37" (9,4 mm) 0.72" (18,3 mm) 2.50" (63,5 mm) 12
8445-7.5 054007-09483 2-1/0 AWG
(35-50 mm²)
0.37" (9,4 mm) 0.72" (18,3 mm) 7.50" (190,5 mm) 12
8447-3.2 054007-09487 1/0–3/0 AWG
(60–80 mm²)
0.49" (12,4 mm) 0.95" (24,1 mm) 3.20" (81,3 mm) 12
8447-8 054007-09484 1/0–3/0 AWG
(60–80 mm²)
0.49" (12,4 mm) 0.95" (24,1 mm) 8.00" (203,2 mm) 12
Low Voltage Splices, 1000 V or less
Single Conductor Cable
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:50 PM Page 165
166 FAX: 800-245-0329
3M™ Cold Shrink Splice Kits
3M™ Cold Shrink Quick Insulator QI Series
3M™ Cold Shrink Quick Insulator QI Series are open-ended tubular rubber sleeves with sealing mastic on each
end that are factory expanded and assembled onto a removable core. The core is removed by pulling from one
end after the QI insulator has been positioned over an inline connector, allowing the ends of the tube to shrink
and form a water-resistant seal. Sizing of the core and tube, along with the sealing mastic on each end,
provides a broader application range without degrading the seal and insulating characteristics of the EPDM rubber tube. Three diameter sizes will cover a
range of 1 kV or less cable from 8 AWG–1250 kcmil, copper and aluminum conductors with crimped connectors.
Voltage 1000 V or less
Number of Conductors Single Conductor
Cable Type Low Voltage Single Conductor
Insulated Cable
Splice Type Cold Shrink
Applications
Insulating and protecting low voltage
splices in direct bury secondary low
voltage applications.
RoHS 2011/65/EU Yes
Agency Approvals ANSI C-119.1
Order No. UPC Conductor Size,
Cu
Conductor Size,
Al Cable Insulation O.D. Max. Connector
O.D.
Max Connector
Length Case Qty.
QI-5/16-220 051128-57750 8–2/0 AWG 8–1/0 AWG 0.20"–0.65"
(5,1–16,5 mm)
0.65" (16,5 mm) 2.75" (69,9 mm) 10
QI-10/37-270 051128-57698 2 AWG–750 kcmil 2 AWG–500 kcmil 0.40"–1.45"
(10,2–36,8 mm)
1.45" (36,8 mm) 4.50" (114,3 mm) 10
QI-18/57-325 051128-57751 250–1250 kcmil 250–1250 kcmil 0.71"–2.25"
(18,0–57,2 mm)
2.25" (57,2 mm) 6.00" (152,4 mm) 10
Low Voltage Splices, 1000 V or less
Single Conductor Cable
IronwoodPremium_243201_Catalog-On-Demand4.QXD 7/10/2013 8:13 PM Page 166
smule Conductor ca 2 Multiple Condumun to man wit, Cabl:
PHONE: 800-245-3573 www.3M.com/Electrical 167
3M™ Cold Shrink Splice Kits
3M™ Cold Shrink Quick Splice Low Voltage QSLV-M Series
3M™ Cold Shrink Quick Splice Low Voltage QSLV-M are open-ended tubular rubber sleeves with sealing mastic on each end which are factory expanded
and assembled onto a unique three-core system. Two cores, one on each end, are removed after the QSLV-M insulator has been centered over an inline
connector, allowing the ends of the tube to shrink and form a water-resistant seal. The third, center segment of the core remains inside the cold shrink tube,
acting as a support structure. Sizing of the cores and tube, along with the sealing mastic on each end, is designed to accommodate the variance in
connectors and connector crimping techniques and final dimensions without degrading the seal and insulating characteristics of the EPDM rubber tube,
while also making core removal easy. Two diameter sizes will cover a range of 1 kV or less cable from 8 AWG through 500 kcmil, copper and aluminum
conductors with crimped connectors.
In aerial applications where intense UV radiation will be common and visual inspection is not possible, it is recommended to overwrap the tubing with
Scotch® Super 33+™ Vinyl Electrical Tape or Scotch® Self-Fusing Silicone Rubber Electrical Tape 70.
Note: Insulator may be used on cable sizes outside of the recommended range provided both cables are within the insulation O.D. range, and the connector
meets the dimensional requirements shown in the table.
Voltage 1000 V or less
Number of Conductors Single Conductor
Cable Type Low Voltage Single Conductor
Insulated Cable
Splice Type Cold Shrink
Applications
Insulating and protecting low voltage
splices in direct bury secondary low
voltage applications.
RoHS 2011/65/EU Yes
Agency Approvals ANSI C119.1
Order No. UPC Cable Size, Al Cable Size, Cu Cable Insulation O.D. Max. Connector
O.D. Max. Connector Length Case Qty.
QSLV-M(8-2/0) 051128-57236 8–2/0 AWG 8–3/0 AWG 0.20"–0.75"
(5–19 mm)
0.687" (17 mm) 2.50" (63 mm) 10
QSLV-M(2-500) 051128-57237 2 AWG–500 kcmil 2 AWG–1000 kcmil 0.40"–1.60"
(10–41 mm)
1.500" (38 mm) 4.25" (108 mm) 10
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand4.QXD 7/10/2013 8:13 PM Page 167
168 FAX: 800-245-0329
3M™ Cold Shrink Splice Kits
3M™ Cold Shrink Connector Insulator WF Series
3M™ Cold Shrink Connector Insulator WF Series are designed using 3M's unique cold shrink delivery system. Products are supplied pre-stretched on a
removable core for efficiency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position
forming a moisture tight seal. The live memory action of the specially formulated EPDM material promotes a permenant, durable environmental seal and
insulation, with typical operating range from 40° to 194°F (-40° to 90°C).
Voltage 2000 V or less
Number of Conductors Single Conductor
Cable Type Low Voltage Single Conductor
Insulated Cable
Splice Type Cold Shrink
Applications
Primary electrical insulation for all
solid dielectric (rubber and plastic)
insulated wire and cable splices rated
to 2000 volts. Direct bury or sub-
mersible, indoor and outdoor, lug con-
nections to bus bar, insulation of sec-
ondary splices, copper or aluminum
conductors, relocation of service, dig in
and sheath repairs, wind farm down
tower applications, environmental
sealing for communication and other
non-electrical applications and insula-
tion of inline conductor transition con-
nector.
RoHS 2011/65/EU Yes
Agency Approvals UL listed in US and Canada
Order No. UPC Conductor Size AWG & kcmil Product Diameter Range Inches (mm) Min. Order Qty. Case Qty.
WF100 051128-60145 4-2 AWG 0.35"-0.56" (8,9-14,2 mm) 10 10
WF101 051128-60146 1-2/0 AWG 0.45"-0.82" (11,4-20,8 mm) 10 10
WF102 051128-60147 3/0 AWG-250 kcmil 0.62"-1.18" (15,7-30,1 mm) 10 10
WF103 051128-59546 350-500 kcmil 0.88"-1.63" (22,4-41,4 mm) 10 10
WF104 051128-60148 600-750 kcmil (Al)
600-1000 kcmil (Cu)
1.00"-1.94" (25,4-49,3 mm) 10 10
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand4.QXD 7/10/2013 8:13 PM Page 168
PHONE: 800-245-3573 www.3M.com/Electrical 169
3M™ Cold Shrink Splice Kits
3M™ Inline Splices for 3/C or 4/C Armored Power Cable (Teck-90) 5730 Series
These kits are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications. Each kit requires at least 1 roll of
3M™ Sheath Wrap Structural Material. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V.
3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from
0.62–4.00” (16–102 mm).
Notes
Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred.
Amount of sheath wrap needed is based on two half-lapped layers and 15' rolls.
Voltage 1000 V or less
Number of Conductors Multiple Conductor
Cable/Shielding Type Armor Power Cable (Teck 90)
Splice Type Inline
RoHS 2011/65/EU Yes
Agency Approvals Certified for 600 V or less
CSA Approved for use in the United
States and Canada
Order No. UPC Voltage Conductor Size Overall Jacket Diameter Number of
Conductors Amount of 3M™ Sheath Wrap Required Case Qty.
5730 054007-43171 0–600 V 14–10 AWG 0.62"–1.00"
(15,7–25,4 mm)
3/C or 4/C 1 roll 1
5731 054007-43172 0–600 V 8–4 AWG 0.95"–1.40"
(24,1–35,6 mm)
3/C or 4/C 1 roll 1
5732 054007-43173 0–1000 V 2–1/0 AWG 0.95"–2.40"
(24,1–61,0 mm)
3/C only 1 roll 1
5733 054007-43174 0–1000 V 2/0 AWG–250 kcmil 1.15"–3.30"
(29,2–83,8 mm)
3/C only 2 rolls 1
5734 054007-43175 0–1000 V 250–500 kcmil 1.55"–4.00"
(39,4–101,6 mm)
3/C only 2 rolls 1
5735 054007-43176 0–1000 V 500–750 kcmil 1.55"–4.00"
(39,4–101,6 mm)
3/C only 3 rolls 1
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand4.QXD 7/10/2013 8:13 PM Page 169
threeconduaor NonrArmored. Nonshle‘ded Came
170 FAX: 800-245-0329
3M™ Cold Shrink Splice Kits
3M™ Resin/Cold Shrink Non-Shielded, Armored or Non-Armored Splice Kits 5750
Series
3M™ Resin/Cold Shrink 5750 Series splice kits are designed for non-shielded armored and non-armored solid dielectric cables rated up to 5 kV. Each kit
makes one 3/C splice. Connectors are not included and must be ordered separately.
* Splice diameter varies according to cable size (O.D.).
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 1 kV, 5 kV
Number of Conductors Three Conductor
Shielding Type Non-Armored (Non-Shielded), Armored
(Non-Shielded)
Splice Type Inline
Technology Cold Shrink, Resin
Conductor Material Aluminum, Copper
RoHS 2011/65/EU Yes
Agency Approval Mine Safety and Health Administrations
Acceptance: 07-KA060007-MSHA
Order No. UPC Insulation O.D.
Range
1 kV Conductor Size, Copper or
Aluminum
5 kV Conductor Size, Copper or
Aluminum
Splice
Diameter
Range*
Typical Splice
Length
Case
Qty.
5751 051128-59169 0.50"-0.95"
(13-24 mm)
1-3/0 AWG
(50-95 mm²)
6-1 AWG
(14-50 mm²)
1.5"-2.5"
(38,1-63,5
mm)
19.0"
(483 mm)
1
5752 051128-59168 0.66"-1.25"
(17-31 mm)
4/0 AWG-350 kcmil
(120-185 mm²)
1/0 AWG-350 kcmil
(60-185 mm²)
2.5"-4.0"
(63,5-101,6
mm)
28.0"
(711 mm)
1
5753 051128-59171 0.95"-1.80"
(24-46 mm)
350-750 kcmil
(185-400 mm²)
350-750 kcmil
(185-400 mm²)
3.5"-6.0"
(88,9-152,4
mm)
42.0"
(1067 mm)
1
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand4.QXD 7/10/2013 8:13 PM Page 170
PHONE: 800-245-3573 www.3M.com/Electrical 171
3M™ Cold Shrink Splice Kits
3M™ Cold Shrink Portable Cable Splice Kits 2237A and 2238A
3M™ Cold Shrink Portable Cable Splice Kits 2237A and 2238A are designed to splice SO and SJ type portable power cables (commercial grade extension
cords) which are typically used in industrial environments. The 2237A kit accommodates 4-conductor 12-10 AWG and the 2238A kit accommodates 4-
conductor 8 AWG.
The primary application for the kits is splicing damaged portable cable. The kits can be used for cables aboard ships, cargo operations and a variety of
industrial applications.
Each kit contains:
• Cold shrink tube
• Butt connectors
• Rubber phase
• Divider mastic strips
• Scotch® Vinyl Electrical Color-Coding Tape 35
• Instructions
Voltage 1000 V or less
Number of Conductors Single Conductor
Cable/Shielding Type SO, SJ
Splice Type Cold Shrink
Application Splicing damaged portable cable.
RoHS 2011/65/EU Yes
Order No. UPC Conductor Size Cable O.D. Case Qty.
2237A 054007-41317 12-10 AWG (6 mm²) 0.62" (0.96 mm) 10
2238A 054007-41318 8 AWG (10 mm²) 0.62" (0.96 mm) 10
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand4.QXD 7/10/2013 8:13 PM Page 171
172 FAX: 800-245-0329
Low Voltage Splices, 1000 V or less
IronwoodPremium_243201_Catalog-On-Demand4.QXD 7/10/2013 8:13 PM Page 172
PHONE: 800-245-3573 www.3M.com/Electrical 173
Medium Voltage Splice Kits, 5 kV–46 kV
3M™ Splice Solutions are designed to help you reduce
the time, labor and cost involved in a variety of electrical
cable splicing applications. The 3M product line covers
splicing needs from 5 kV-46 kV applications, and utilizes
field-proven technologies to provide dependable
performance, stability and long life with every splice you
make. With 3M, you can choose the right splice to fit
your specific needs.
Cold Shrink Splices
3M™ Cold Shrink splicing products are designed using
3M's proprietary cold shrink delivery system. Products
are supplied pre-stretched on a removable core for
efficiency and ease of installation. The removable core unwinds after positioning the splice, allowing the
product to shrink into position and form a moisture resistant seal. The live-memory action of the specially
formulated material ensures a permanent, durable environmental seal and insulation. All 3M™ Cold
Shrink QS-III medium voltage (5 kV-46 kV) kits meet the requirements of IEEE-404, and each splice is
factory tested on power cable to ensure long-term reliability and quality. 3M QS-III splices can be used for
direct burial applications, as well as in manholes, vaults, cable trays, and junction boxes. All 3M cold
shrink products require no special tools, flame or training to install.
Molded Rubber Splices
3M™ Molded Rubber QS and QS-II kits are molded from specially formulated, peroxide cured, EPDM
rubber to provide a reliable medium voltage inline splice with a life expectancy equal to the cable. All 3M
medium voltage (15 kV-35 kV) QS Series meet the requirements of IEEE-404, and each splice is factory
tested.
PILC Splices
3M™ Cold Shrink splice kits for Paper Insulated Lead Covered (PILC) cable use 3M patented oil stop
technology. Kits install without soldering or lead wiping. 3M Cold Shrink PILC splices allow quick
installation time without the need of an open flame or heat. Single conductor splice kits allow inline
splicing of PILC to PILC or PILC to Poly/EPR insulated cable. Three conductor cable splices kits are
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand4.QXD 7/10/2013 8:13 PM Page 173
174 FAX: 800-245-0329
designed to transition splice three conductor PILC to three single conductor poly/EPR insulated cables. All
splices are jacketed and can be fully submersed. Modular splice kits are available for single conductor
PILC equipment connections and tap splicing.
Resin Splices
3M™ Resin Splice Kits are used in a variety of applications where conditions require the unique
properties of 3M resins. The splicing kits have a high degree of mechanical strength for physical
protection of connections and provide moisture-resistant insulation in above ground or direct burial
applications.
Tape Splices
When you want the versatility of tape, Scotch® Cable Splicing Kits are the answer for almost any
application, regardless of cable type or size. Scotch® rubber splicing tape is designed for extra-long shelf
life, so there's less chance of being caught without the supplies you need for emergencies. Tape products
are available to splice cables from 2 kV-69 kV.
Medium Voltage Splice Kits, 5 kV–46 kV
Section Page
5 kV..................................................................................................181-182
5/8 kV...............................................................................................183-189
15 kV................................................................................................190-209
25/28 kV...........................................................................................210-221
35 kV................................................................................................222-230
46 kV................................................................................................231-232
IronwoodPremium_243201_Catalog-On-Demand4.QXD 7/10/2013 8:13 PM Page 174
Technology Features Installation Time Installation Ease Wide Application Range Factory Re-Jacketing T““"°'°9’ (1 -5, 1=Fastest) (1 -5, 1 =Easiesl) (1 -5, 1 =createsi) Tested Included CON Shrink i 1 2 V95 Push Dn/Molded Rubber 2 2 4 Yes No RESIN 3 3 3 N0 V65 Tape 4 4 1 N0 V95 5 kV Medium Voltage Splice Reference E Three Conductor (3/0) @ lion—slim 6 alrr'calnShrimsnlicem @] aM' Resin/cold Shrink NarirShiEifleflyflrmflrefl m MmrArmnren Splice K115 5750 Series 5/8 W Medium Vottage Splice Reference E Single Conductor (1/ci Three Conductor (3/0) 8 Shielded Mnn-Ill'eldnd rape Sil'eld,Mre Sinai-i, uniShinl-r, Lmluimilinaly Wind [LB] 3M" mill Shrink 3M" Tape Splice lms 3M" Cold Shrilk 3M“ Cold Shrink snlice IGls Splice Kits Splhe Kits mum] [arm rum] ~"“"“ mm new GM ‘ WU Shrink Somaliz Inlirie and Tee 3M” Cold Shrink lrilirie 3M V Cult] Shrink] 3M" Cold Shrink (IS-ill 3M V Coin Shrink lnllne smelueu Splice Kris Tape Shielded Danie NorrSmelded snlme Klls Amman Armored or Armored er Snlelded,AlmorelJ or 55511 Series SDlloe Kits 5740 Series Nanrr‘lrmnred SDllEe Kil Nnrlrnrmnred Cable NnnrArlneren snlree Klis 5100 Series 5551 ache Spline Kits 5775mm, 5760 Series 5779\er a 577mm
PHONE: 800-245-3573 www.3M.com/Electrical 175
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand4.QXD 7/10/2013 8:13 PM Page 175
15 kV Medium Voltage Splice Reference 0 ngle conductor (we) a Commie Numl (M) and inhaled curreemrie Neml (Jam 6 3M“ Gold Shrink Splice Kils 3M" Molded (non-Pm nubba [w Splice Kile Inllne Branch 3M‘cnln 3M“ cola 3M“ Maiden Shrink Gerlll Snrlnk Blanch Ruhhei as lrrlrrre JEN/ JCN and lrrlrrre JEN] ell Spline Kris Shielded Splice en Splice Kris 5¢15A,54l6k Klls 0920013 we Series 5417A, 54w 3M” Molded Runner OS-ll lnllne JCN/ cn Spice Kris 5m 5" M and 5412 Series 3M” Molded Rubber 0w JON/0N Cable Henail Snllce Kit 541 I R and 5“ 2n Series lane Lonniludlually cemented (Le) 3M"Tape 3M" Cole Shrink Splice Klls Svliue Kns (nun-no) Flinn mm IIIIM Brawn swim!) Irrlrrre 3M ‘ 0qu 3M ‘ Cold and Tee Tape Snrlnk OSrlll Snrlnk Branch Shielded Cable Shielded Cable Splice Kris as Snllce Kris Splice Kils 200m 5700 Series ssl 3k 5514A. 55l 5A and 55l 6A series II. Wire Shillfl. IJII‘SIIiIII‘l'. 3M" Molded Rubber Splice m 3M ' Molded Rubber flSrlI lrrlrrre Shielded Cable Splice Klis 5500 Selles 3M" we Splice Kils Swim“ lrrlrne and Tee lape Sirieleee lame Splice Kits 5700 Series Pepsi Ilullakl‘l Lead Gwer (PH-C) 3M" cold Snvink Splice Kits mm rrsw 3M ‘ cola Snlink l/C Irrlirre Transflim Splice Krl OS-lllr 551 UArlTrPILC Series (M V Cele srlrirrk Splice Kn usrzuuoT l/C PILC in HE Pnly/EPR er 1/0 PlLC in WC PILC Cable Spllces a Three Conduclor (3/0) a Taxi Sillild, WhSlllIld, IlliSlllIld‘, Lollglwfllllllly conugdhd (LE) 3M" Cold Shrink Spline Kils lnon-PILC) 'urrxm new GM” Cnld Sniink flSrIIl Arrrrnred, NnnrAnnnred Cable Snllces Kits 5775;1th 5775mm E 5777A-MT 3M" Cold shrink and Resin Saline Klis (nun-Pm) err-arm mm. 3M” Cald Srrrirrk SIC IrrIirre Stileldedlkmovad M NnnrAimmed Splice Kns 5760 Belles Paul Insulated Lad MMLCD 5M" Cold Shrink Silioe ms mum mu 3M” Cold Shrink 31C PM} in 3/0 Pbly/EPR Cable Transillull Snllce Kll 037201 SVSTVSC SM‘ Cola Snnnk Spree Kll osrzolmrar arm usrzuoorarrws 3/0 Pch in UK) Palv/EPR cable Tnnllmling splices
176 FAX: 800-245-0329
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand4.QXD 7/10/2013 8:13 PM Page 176
25/28 kV Medium Voltage Splice Reference p! g ingle conductorl1IC) (Tail/gs condu r @ Bolllzlfltil: llenual (all) and 1"." *"fl‘m'. “3"“ Paper Ila-llama Lead 1".” 'w". 9"“ J“ “mm mm mm) unusual-lemming"), 0mm“ UlllSll Il',Lflnfllnlinflly WNW (L0) 0|)!“le (LC) 3w mm smilk 3M“ Malded Rubber Splice Kns 3M" Cold Shrink Spline Kiis 3M" cam Smilk Splice Kiis 3M" Cold Shrink Spline Kiis snlioeKmlmn-PILC) [mm] (nun-PILL) lam-1m mm [nun-PILC) Mm llimu. mm 3M" Cold SNIVIK 05’“ 3M ‘ Muldefl 3M ‘ Mulded 3M ‘ Cbld Sllle uSrlll Illllll! 3M .. Cold SNIVIK I/C 3M ‘ Mid S'Vlllk mrlll 3/9 Inline CN/JCN Cable Rubber 05'“ Rubber 08'“ Shielded Cable Splice Kits Transmon Splice Kil QS'lll li’ilii’ie Armored or Mcnr Spline Kfls 5455A lrililie CN/JCN Illlllle CN/JCN 5524A 5525A and 5528A ESZUA'l T'PlLC Salias Aminred Cable Splice Kils 545mm 5458A Cable Splice Kits Callie Snlice Kil 5mm 578mm and 5420 SWISS 5450 $2095 57EEA7MT 3M ' Molded Rubber 05'" JEN Cahle Hepail Splice Kit 5451 n SelleS 35 kV Medium Voltage Splice Reference 7‘ a Single Conductor (1/6) (Tall/r3 Conductor Q concentric llaml (fill) aim 7“; s.""“’ w'": 5"!“ Paper mum Lam 1'23”“ m"; SM" J: “Hum I (JEN) Un Illelfl'. Lnllulludlllally (Fill!) [In ldfl', memuii-lly mm "“3 annupml (LC) 9‘“ command (Ln) 8 3M" can shrink Splice Kits 3M" Molded Ruhoer Splice 3M ' Cold Shlink Splice Ms (M ' min sunnk Snlice Kils 34" can Shrink Splice Kits (non-PILCl Kiis ’mnm (non—PILC) mm «mun inon-PiLCl l l liwm mm ml 3M ' Cfilfl Sliilnk flS'IlI inllne 3M ' Maiden Rubber 3M V Cold Slliii’iKQS'lll Ii'ilii'ie 3Mm Cold Sl’iiiiik GS'lll Ililiiie 3M" Cold Shilllk US'IlI 3/C CN/JCN Cable Splice Kils OS CN/JCN Dalila Splice Kits Shielded Cable Splice KilS Shielded Cable Splice Kils Amman Di NflmAllilmed 5457A and SJEBA 5432 2nd 5433 5535A and 5535A 5530A-lT-PlLC Sella: Sulica Kils 5797A-MT and 5758A-MT SM‘ Cam smmK uSrlll 3M' Maiden Rubber flSriI CM/JCN Came shield-Break CN/JDN came splice KilS Spline Kits 5467MB and 5461 SAW-XE
PHONE: 800-245-3573 www.3M.com/Electrical 177
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand4.QXD 7/10/2013 8:13 PM Page 177
46 kV Medium Voltage Splice Reference 9 “allied 3M" com Shrink Splice ms (non-FILE] 6 imam-1] "mm M ' mm Shrink DSrlll Wlne Smeldad swine Kn 55451 ‘F« my when, m wan Vanna scalar: m mung.
178 FAX: 800-245-0329
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand5.QXD 7/10/2013 8:12 PM Page 178
Cable Types for Medium Voltage Splicing -—— Tape Shielded Came ere Sh‘E‘ded Came 1 UNSNBW Cab‘e W— Lnngwludinally surmgatau (ch Smelded Cable EPrLead or XLPrLead Came cancenmc Neutral 1cm came Jackeled Concentric Neutra‘ UCN) Cable t-C ‘UIIIIIC fig; Paper msmmu Lead Caveved {ch) Cable
PHONE: 800-245-3573 www.3M.com/Electrical 179
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand5.QXD 7/10/2013 8:12 PM Page 179
180 FAX: 800-245-0329
Cable Types for Medium Voltage Splicing
Cable Types for Splicing
Three-Conductor Paper Insulated Lead Covered (PILC) Cable
Three-Conductor Armored, Shielded Cable
Three-Conductor Non-Armored, Shielded Cable
Three-Conductor Portable Cable Type SHD-GC
Non Shielded (Dry) Cable
Non Shielded (Wet or Dry) Cable
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand5.QXD 7/10/2013 8:12 PM Page 180
PHONE: 800-245-3573 www.3M.com/Electrical 181
5 kV Medium Voltage Splices
The following 3M products cover splicing needs for applications up to 5 kV, and
promote dependable performance, stability and long life with every splice you
make.
Medium Voltage Splice Kits, 5 kV–46 kV
Section Page
5 kV..................................................................................................181-182
Non-Shielded...........................................................................................................................182
Three Conductor (3/C) ....................................................................................................................................182
3M™ Resin/Cold Shrink Non-Shielded, Armored or Non-Armored Splice Kits 5750 Series ..............................................................182
IronwoodPremium_243201_Catalog-On-Demand5.QXD 7/10/2013 8:12 PM Page 181
threeconduaor NonrArmored. Nonshle‘ded Came
182 FAX: 800-245-0329
5 kV: Non-Shielded: Three Conductor (3/C)
3M™ Resin/Cold Shrink Non-Shielded, Armored or Non-Armored Splice Kits 5750
Series
3M™ Resin/Cold Shrink 5750 Series splice kits are designed for non-shielded armored and non-armored solid dielectric cables rated up to 5 kV. Each kit
makes one 3/C splice. Connectors are not included and must be ordered separately.
* Splice diameter varies according to cable size (O.D.).
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 1 kV, 5 kV
Number of Conductors Three Conductor
Shielding Type Non-Armored (Non-Shielded), Armored
(Non-Shielded)
Splice Type Inline
Technology Cold Shrink, Resin
Conductor Material Aluminum, Copper
RoHS 2011/65/EU Yes
Agency Approval Mine Safety and Health Administrations
Acceptance: 07-KA060007-MSHA
Order No. UPC Insulation O.D.
Range
1 kV Conductor Size, Copper or
Aluminum
5 kV Conductor Size, Copper or
Aluminum
Splice
Diameter
Range*
Typical Splice
Length
Case
Qty.
5751 051128-59169 0.50"-0.95"
(13-24 mm)
1-3/0 AWG
(50-95 mm²)
6-1 AWG
(14-50 mm²)
1.5"-2.5"
(38,1-63,5
mm)
19.0"
(483 mm)
1
5752 051128-59168 0.66"-1.25"
(17-31 mm)
4/0 AWG-350 kcmil
(120-185 mm²)
1/0 AWG-350 kcmil
(60-185 mm²)
2.5"-4.0"
(63,5-101,6
mm)
28.0"
(711 mm)
1
5753 051128-59171 0.95"-1.80"
(24-46 mm)
350-750 kcmil
(185-400 mm²)
350-750 kcmil
(185-400 mm²)
3.5"-6.0"
(88,9-152,4
mm)
42.0"
(1067 mm)
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand5.QXD 7/10/2013 8:12 PM Page 182
PHONE: 800-245-3573 www.3M.com/Electrical 183
5/8 kV Medium Voltage Splices
The following 3M products cover splicing needs for applications up to 5/8 kV, and
promote dependable performance, stability and long life with every splice you
make.
Medium Voltage Splice Kits, 5 kV–46 kV
Section Page
5/8 kV...............................................................................................183-189
Non-Shielded...........................................................................................................................184
Single Conductor (1/C)....................................................................................................................................184
3M™ Cold Shrink Inline Non-Shielded Splice Kits 5740 Series .......................................................................................................184
Shielded ...........................................................................................................................185-189
Single Conductor (1/C) ............................................................................................................................185-186
Scotch® Inline and Tee Tape Shielded Cable Splice Kit 5700 Series................................................................................................185
3M™ Cold Shrink Shielded Splice Kits 5550 Series ........................................................................................................................186
Three Conductor (3/C).............................................................................................................................187-189
3M™ Cold Shrink/Sheath Wrap, Armored or Non-Armored Splice Kit 5551-3C-AC..............................................................................187
3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Cable Splice Kits 5775A-MT, 5776A-MT & 5777A-MT for 5/8 kV.................188
3M™ Cold Shrink MT-C & MT-E Trifurcating Accessory Kits (One 3/C to Three 1/C) for 5/8 kV.........................................................189
3M™ Cold Shrink 3/C Inline Shielded, Armored or Non-Armored Splice Kits 5760 Series for 5/8 kV................................................189
IronwoodPremium_243201_Catalog-On-Demand5.QXD 7/10/2013 8:12 PM Page 183
Nanshldded (Dry) (we Nunxhlaldad Mu nr am (able
184 FAX: 800-245-0329
5/8 kV: Non-Shielded: Single Conductor (1/C)
3M™ Cold Shrink Inline Non-Shielded Splice Kits 5740 Series
The 3M™ Cold Shrink Splicing Products are designed using the proprietary cold shrink delivery system developed by 3M. Products are supplied
prestretched on a removable core for efficiency and ease of installation. 3M™ Cold Shrink Splices 5740 Series are used for single conductor, non-shielded
5/8 kV cables.
Each kit is a cold shrink design and contains enough material to insulate three splices. Connectors are not included and must be ordered separately.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 5/8 kV
Number of Conductors Single Conductor
Shielding Type Non-Shielded (Dry) Cable, Non-
Shielded (Wet or Dry) Cable
Splice Type Inline
Technology Cold Shrink
Order No. UPC Insulation/Jacket O.D.
Range Conductor Size Max. Connector Length (Cu
or Al)
Typical Splice
Length
Case
Qty.
5741 054007-49491 0.38"-0.70"
(9,7-17,8 mm)
8-4 AWG (10-25 mm²) 2.5"
(63,5 mm)
10"
(254 mm)
1
5742 054007-49492 0.63"-1.20"
(16,0-30,5 mm)
2 AWG-300 kcmil (35-150 mm²) 4.25"
(108,0 mm)
12"
(305 mm)
1
5743 054007-49493 0.90"-2.10"
(22,9-53,3 mm)
Cu: 350-1000 kcmil (185-500 mm²)
Al: 350-750 kcmil (185-400 mm²)
6.25"
(158,8 mm)
15"
(381 mm)
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand5.QXD 7/10/2013 8:12 PM Page 184
\ ‘ Tape smemed cam: I ‘NIV: Shie‘ded Cam: umsmela‘mble 5 and 8 kV 175mi| 220 mil 5 and 8 W 175 mil 220 mil Nola: Lavgemumbeved kits may be used m place at smallevnumbered kils mm excess mama‘s \th aver).
PHONE: 800-245-3573 www.3M.com/Electrical 185
5/8 kV: Shielded: Single Conductor (1/C)
Scotch® Inline and Tee Tape Shielded
Cable Splice Kit 5700 Series
Scotch® Inline and Tee Tape Shielded Cable Splice Kits 5700 Series handle
inline and tee splices on tape shielded, wire shielded or UniShield® cables
with copper (Cu) or aluminum (Al) conductors. Kits are rated 5 kV-15 kV, and
each kit makes three splices. Use the selector chart to determine the proper kit
needed. Connectors and Lugs need to be ordered separately. 3M does not offer
tee connectors.
Note: Cable sizes shown below are for standard insulation thickness.
Final determining factor is cable insulation O.D.
Voltage: 5 kV, 5/8 kV, 15 kV
Number of Conductors: Single Conductor
Shielding Type: Tape Shield, Wire Shield, UniShield®
Splice Type: Inline, Tee
Technology: Tape
Conductor Material: Aluminum, Copper
Order No. UPC Case Qty.
5717 054007-12030 1
5718 054007-12048 1
5719 054007-12055 1
5720 054007-12063 1
Medium Voltage Splice Kits, 5 kV–46 kV
Inline Splices Tee Splices*
15 kV 100% 15 kV 133% 15 kV 100% 15 kV 133%
5 and 8 kV 175mil 220 mil 5 and 8 kV 175 mil 220 mil
Product UPC Case
Number (054007-) Cu Al Cu Al Cu Al Cu Al Cu Al Cu Al Qty.
5717 12030 4-250 4-4/0 4-2 4 ———— 1
(22-125) (2-100) (22-30)
5718 12048 300-500 250 1-4/0 4-2/0 2-1/0 4-2/0 4-1/0 ———— 1
(180-250) (150) (50-100) (22-60) (35-60) (22-60) (22-50)
5719 12055 550-1000 300-500 250-500 3/0-250 2/0-350 4-3/0 3/0-350 2/0-4/0 4-1 — — — 1
(300-500) (180-250) (180-250) (95-125) (70-180) (22-80) (95-180) (70-100) (22-38)
5720 12063 500-1000 550-1000 300-750 400-750 4/0-500 400-750 250-500 1/0-350 4-4/0 4-250 4-3/0 1
(300-500) (300-500) (180-325) (240-325) (120-250) (240-325) (125-250) (60-180) (22-100) (22-125) (22-80)
*3M does not offer tee compression connectors.
Note: Larger-numbered kits may be used in place of smaller-numbered kits (with excess materials left over).
Tape Shielded Cable, Wire Shielded Cable, UniShield®Cable
See above for cable type illustrations.
IronwoodPremium_243201_Catalog-On-Demand5.QXD 7/10/2013 8:12 PM Page 185
‘fape Shielded Cable -._LJ Wlle Shie‘ded Cab‘e I Um’Shield‘ Cable
186 FAX: 800-245-0329
5/8 kV: Shielded: Single Conductor (1/C)
3M™ Cold Shrink Shielded Splice Kits 5550 Series
3M™ Cold Shrink Shielded Splice Kit 5550 Series are for splicing 5 kV and 8 kV shielded, solid dielectric, power cables. Meets requirements of IEEE 404.
Each kit contains all the materials (except connectors and optional ground strap) required to construct three (3) single conductor splices on Tape Shield, Wire
Shield or UniShield® cables.
Note: The kit can also be used to splice a shielded to a non-shielded 5/8 kV cable.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 5/8 kV
Number of Conductors 3 Single Conductors
Shielding Type Tape Shield, Wire Shield, UniShield®
Splice Type Inline
Technology Cold Shrink, Tape
Order No. UPC Conductor Size, Cu Conductor Size, Al
Max
Connector
Length, Cu
Max
Connector
Length, Al
Typical Splice
Length Suggested Accessory Case
Qty.
5551 054007-09089 6-4/0 AWG
(14-100 mm²)
6-3/0 AWG
(14-80 mm²)
3.3"
(84 mm)
2.7"
(69 mm)
19.0"
(482,6 mm)
3M Ground Strap
Assembly GS-1
1
5552 054007-09090 4/0 AWG-500 kcmil
(120-250 mm²)
4/0 AWG-400 kcmil
(120-200 mm²)
4.3"
(109 mm)
3.7"
(94 mm)
21.0"
(533,4 mm)
3M Ground Strap
Assembly GS-2
1
5553 054007-09091 500-1000 kcmil
(300-500 mm²)
500-1000 kcmil
(300-500 mm²)
6.3"
(160 mm)
5.3"
(135 mm)
23.0"
(584,2 mm)
3M Ground Strap
Assembly GS-3
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand6.QXD 7/10/2013 8:12 PM Page 186
Three-Ccnduclor Non-Armored, Shielded Cable
PHONE: 800-245-3573 www.3M.com/Electrical 187
5/8 kV: Shielded: Three Conductor (3/C)
3M™ Cold Shrink/Sheath Wrap, Armored or Non-Armored Splice Kit 5551-3C-AC
3M™ Cold Shrink/Sheath Wrap, Armored or Non-Armored Splice Kit 5551-3C-AC is for splicing 3/C, 5/8 kV shielded, armored and non-armored
cables. Connectors are not included. Kits include sheath wrap structural material to reconstitute the cable's armor. Meets the requirements of IEEE
404. Each kit makes one 3/C splice.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 5/8 kV
Number of Conductors Three Conductors
Shielding Type Shielded Armored or Non-Armored
Splice Type Inline
Technology Cold Shrink, Sheath Wrap, Tape
Order No. UPC Insulation O.D. Range Conductor Size
Max.
Connector
Length
Typical Splice
Length
Case
Qty.
5551-3C-AC 051128-54317 0.37"-0.78" (9,4-19,8 mm) Cu: 6-4/0 AWG (14-120 mm²)
Al: 6-3/0 AWG (14-95 mm²)
2.7" (68,6 mm) 34" (864 mm) 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand6.QXD 7/10/2013 8:12 PM Page 187
WK Three-Ccnduclor Non-Armored, Shielded Cable
188 FAX: 800-245-0329
5/8 kV: Shielded: Three Conductor (3/C)
3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Cable Splice Kits 5775A-MT,
5776A-MT & 5777A-MT for 5/8 kV
3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Cable Splices 5775A-MT, 5776A-MT and 5777A-MT Series are designed for splicing 3-conductor,
armored and non-armored, shielded power cables. The kits are rated for use on 5/8 kV cables with conductor sizes from 3/0 AWG-1000 kcmil (95-500
mm²) or 15 kV cables with conductor sizes from 2 AWG-750 kcmil (35-325 mm²). The kits are designed to be used with 3M™ Scotchlok™ Connectors
10000 and 20000 Series or other UL listed inline compression connectors that fit within the dimension limits listed in the data sheet. Meets the
requirements of IEEE-404.
Kits include material necessary to make one 3/C splice. Connectors are not included and must be ordered separately. The completed splice is designed for
use in cable trays, weather exposed or direct burial locations.
The splice utilizes several technologies to accommodate the various functions of a 3/C shielded power cable: 3M™ Cold Shrink QS-III Splice Bodies,
Scotch® Tapes for moisture sealing, Constant Force Springs for connecting ground braid jumpers and sheath wrap for replacing the cable armor and/or
jacket.
Note: When making a trifurcating splice, the 3M™ Cold Shrink MT-C or MT-E Trifurcating Accessory Kit must be used along with the splice kit.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 5/8 kV, 15 kV
Number of Conductors Three Conductors
Shielding Type Shielded Armored or Non-Armored
Splice Type Inline, Trifurcating
Technology Cold Shrink, Sheath Wrap
Order No. UPC Insulation O.D. Range Conductor Size, 5/8 kV Typical Splice
Length Suggested Accessory Case
Qty.
5775A-MT 051128-53493 0.64"-1.01"
(16,3-25,7 mm)
3/0 AWG-250 kcmil
(95-125 mm²)
52.0"
(1320,8 mm)
3M™ Trifurcating Accessory for 3-C to
3 Single Conductors MT-C
1
5776A-MT 054007-44112 0.84"-1.38"
(21,3-35,1 mm)
350-500 kcmil
(185-240 mm²)
54.0"
(1371,6 mm)
3M™ Trifurcating Accessory for 3-C to
3 Single Conductors MT-C; or
3M™ Trifurcating Accessory for 3-C to
3 Single Conductors MT-E
1
5777A-MT 054007-44289 1.04"-1.70"
(26,4-43,2 mm)
750-1000 kcmil
(325-500 mm²)
58.0"
(1473,2 mm)
3M™ Trifurcating Accessory for 3-C to
3 Single Conductors MT-E
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand6.QXD 7/10/2013 8:12 PM Page 188
o * Selection Table airsmmsmn-m Manama ml) Ammmmmnsmmm "Typica‘ Cmdumor Size Range —AWG/kcmH 5775A7MT 3/0450 MTVC SHEA-MT 350 MHZ 5775A7MT 500 MTVE 5777A-MT — MT-E ThreeCendmov Nonmmoved, Shwe‘ded Cab‘e
PHONE: 800-245-3573 www.3M.com/Electrical 189
5/8 kV: Shielded: Three Conductor (3/C)
3M™ Cold Shrink MT-C & MT-E
Trifurcating Accessory Kits (One 3/C to
Three 1/C) for 5/8 kV
3M™ Cold Shrink MT-C and MT-E Trifurcating Accessory Kits are used to
break out and seal a transition from 3/C to three 1/C.
For use with 3M™ Cold Shrink QS-III Splicing Series 5700A-MT.
NOTE: Cable sizes shown below are for standard insulation thickness.
Final determining factor is cable insulation O.D.
Voltage: 5/8 kV
Number of Conductors: One 3/C to three 1/C
Order No. UPC Single Conductor Jacket O.D. Kits per Case
MT-C 051128-55208 0.62"-1.13" (15,7-28,7 mm) 1
MT-E 051128-54318 1.13"-1.80" (28,7-45,7 mm) 1
3M™ Cold Shrink 3/C Inline Shielded, Armored or Non-Armored Splice Kits 5760
Series for 5/8 kV
These splice kits are designed for splicing shielded armored and non-armored cables, 5/8 kV and 15 kV. Each kit makes one 3/C splice. Connectors are not
included and must be ordered separately.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 5/8 kV, 15 kV
Number of Conductors Three Conductors
Shielding Type Shielded Armored or Non-Armored
Splice Type Inline
Technology Cold Shrink, Resin
RoHS 2011/65/EU Yes
Order No. UPC Insulation O.D. Range Conductor Size, 5/8 kV
Max.
Connector
O.D.
Max.
Connector
Length
Typical
Splice
Length
Case
Qty.
5761 051128-59172 0.65"-1.00"
(16,5-25,4 mm)
2/0 AWG-350 kcmil
(60-150 mm²)
0.90"
(22,9 mm)
2.75"
(69,9 mm)
29.0"
(737 mm)
1
5762 051128-59170 0.93"-1.94"
(23,6-49,3 mm)
500-1000 kcmil
(300-500 mm²)
1.40"
(35,5 mm)
5.00"
(127,0 mm)
44.0"
(1118 mm)
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand6.QXD 7/10/2013 8:12 PM Page 189
190 FAX: 800-245-0329
15 kV Medium Voltage Splices
The following 3M products cover splicing needs for applications up to
15 kV, and promote dependable performance, stability and long life
with every splice you make.
Medium Voltage Splice Kits, 5 kV–46 kV
Section Page
15 kV................................................................................................190-209
3M™ Cold Shrink Splice Kits............................................................................................191-196
Single Conductor (1/C) ............................................................................................................................191-194
Inline .......................................................................................................................................................................................191-194
3M™ Cold Shrink QS-III Inline CN/JCN Splice Kits 5415A, 5416A, 5417A and 5418A Series..................................................191-192
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5513A, 5514A, 5515A and 5516A Series.......................................193-194
Branch............................................................................................................................................................................................194
3M™ Cold Shrink Branch Splice Kit QS-2001B and 3M™ Cold Shrink Branch Splice Adapter QS-2000BA ...................................194
Three Conductor (3/C).............................................................................................................................195-196
3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Cable Splice Kits 5775A-MT, 5776A-MT & 5777A-MT for 15 kV..................195
3M™ Cold Shrink MT-C & MT-E Trifurcating Accessory Kits (One 3/C to Three 1/C) for 15 kV..........................................................196
3M™ Cold Shrink 3/C Inline Shielded, Armored or Non-Armored Splice Kits 5760 Series for 15 kV .................................................196
3M™ Molded Rubber Splice Kits......................................................................................197-202
Single Conductor (1/C) ............................................................................................................................197-202
3M™ Molded Rubber QS-II Inline JCN/CN Splice Kits 5411, 5411A and 5412 Series ......................................................................197
3M™ Molded Rubber QS Inline JCN/CN Splice Kits 5400 Series .....................................................................................................198
3M™ Molded Rubber QS-II JCN/CN Cable Repair Splice Kits 5411R and 5412R Series...................................................................199
3M™ Molded Rubber QS-II Inline Shielded Cable Splice Kits 5500 Series .......................................................................................200
3M™ Aluminum Repair Connectors CIR Series for 3M™ Rubber Splices 5411R & 5412R Series....................................................201
3M™ Connectors CI Series for 3M™ Rubber Splices 5400 & 5500 Series......................................................................................201
3M™ Connectors CI Series for 3M™ Rubber Splices 5411, 5411A, 5412 & 5500 Series................................................................202
3M™ Aluminum Transition Connectors CI-T Series for 5411 & 5500 Series ....................................................................................202
3M™ PILC Splice Kits ......................................................................................................203-208
Single Conductor (1/C) ............................................................................................................................203-204
3M™ Cold Shrink QS-III 1/C Inline Transition Splice Kits 5510A-1T-PILC Series ..............................................................................203
3M™ Cold Shrink Splice Kits QS-2000T 1/C PILC to 1/C Poly/EPR or 1/C PILC to 1/C PILC Cable Splices ........................................204
Three Conductor (3/C).............................................................................................................................205-208
3M™ Cold Shrink Splice Kits QS-2000-3T and QS-2000-3T-WS 3/C PILC to 1/C Poly/EPR Cable Trifurcating Splices......................205
3M™ Cold Shrink 3/C PILC to 3/C Poly/EPR Cable Transition Splice Kit QS-2013-3T-3C..................................................................206
3M™ Scotchlok™ Connectors 2000T-CU for 15 kV........................................................................................................................207
3M™ Scotchlok™ Reducer Series Connectors 2000T-CU/AL for 15 kV ..........................................................................................208
3M™ Tape Splice Kits..............................................................................................................209
Single Conductor (1/C)....................................................................................................................................209
Scotch® Inline and Tee Tape Shielded Cable Splice Kits 5700 Series ..............................................................................................209
IronwoodPremium_243201_Catalog-On-Demand6.QXD 7/10/2013 8:12 PM Page 190
Concentric Neutral lCN) Cable Jacketed Concentric Neutral (JEN) Cable
PHONE: 800-245-3573 www.3M.com/Electrical 191
15 kV: 3M™ Cold Shrink Splice Kits: Single Conductor (1/C): Inline
3M™ Cold Shrink QS-III Inline CN/JCN Splice Kits 5415A, 5416A, 5417A and 5418A
Series
The 3M™ Cold Shrink QS-III Inline CN/JCN Splice Kits 5415A, 5416A, 5417A, 5417A-WG, 5418A and 5418A-WG Series are 15 kV class inline splices for
joining jacketed concentric neutral (JCN) and concentric neutral (CN) power cables. They are a cold shrink design sized to fit Type MV-90 or Type MV-105
cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²). The cold shrink splice body is a one-piece molded design
made of specially formulated silicone rubbers, while the cold shrink jacketing is made of EPDM rubber for physical protection. Each splice manufactured is
factory tested to provide reliability.
The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors as well as shearbolt connectors, and can
be used for size transitions within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 150 kV
(equal to a 25 kV voltage class). The 3M™ Cold Shrink QS-III Splice Kits 5415A, 5416A, 5417A, 5417A-WG, 5418A and 5418A-WG meet or exceed the 15
kV Voltage Class rating requirements of IEEE-404. Kit contents include sufficient materials to make one splice.
Note: 5417A-WG and 5418A-WG are partially jacketed splices containing built-in bleeder wires. Additional end user materials are required to convert to full
jacketing.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 15 kV
Number of Conductors Single Conductor
Shielding Type Concentric Neutral (CN), Jacketed
Concentric Neutral (JCN)
Splice Type Inline
Technology Cold Shrink
Order No. UPC Insulation O.D. Range Conductor Size Connector Included Case Qty.
5415A 051128-53470 0.64"-1.01" (16,3-25,7 mm) 2-4/0 AWG
(35-95 mm²)
-1
5415A-2-AL 051128-53471 0.64"-1.01" (16,3-25,7 mm) 2 AWG 20003 1
5415A-2-CU 051128-53472 0.64"-1.01" (16,3-25,7 mm) 2 AWG 10003 1
5415A-1-AL 051128-53473 0.64"-1.01" (16,3-25,7 mm) 1 AWG 20004 1
5415A-1-CU 051128-53474 0.64"-1.01" (16,3-25,7 mm) 1 AWG 10004 1
5415A-1/0-AL 051128-53475 0.64"-1.01" (16,3-25,7 mm) 1/0 AWG 20005 1
5415A-1/0-CU 051128-53476 0.64"-1.01" (16,3-25,7 mm) 1/0 AWG 10005 1
5415A-2/0-AL 051128-53477 0.64"-1.01" (16,3-25,7 mm) 2/0 AWG 20006 1
5415A-2/0-CU 051128-53478 0.64"-1.01" (16,3-25,7 mm) 2/0 AWG 10006 1
5415A-3/0-AL 051128-53747 0.64"-1.01" (16,3-25,7 mm) 3/0 AWG 20007 1
5415A-3/0-CU 051128-53748 0.64"-1.01" (16,3-25,7 mm) 3/0 AWG 10007 1
5415A-4/0-AL 051128-53749 0.64"-1.01" (16,3-25,7 mm) 4/0 AWG 20008 1
5415A-4/0-CU 051128-53750 0.64"-1.01" (16,3-25,7 mm) 4/0 AWG 10008 1
5416A 054007-44092 0.84"-1.38" (21,3-35,1 mm) 4/0 AWG-350 kcmil
(95-185 mm²)
-1
5416A-4/0-AL 054007-44093 0.84"-1.38" (21,3-35,1 mm) 4/0 AWG 20008 1
5416A-4/0-CU 054007-44094 0.84"-1.38" (21,3-35,1 mm) 4/0 AWG 10008 1
5416A-250-AL 054007-44096 0.84"-1.38" (21,3-35,1 mm) 250 kcmil 20009
5416A-250-CU 054007-44097 0.84"-1.38" (21,3-35,1 mm) 250 kcmil 10009 1
5416A-350-AL 054007-44098 0.84"-1.38" (21,3-35,1 mm) 350 kcmil 20011 1
5416A-350-CU 054007-44099 0.84"-1.38" (21,3-35,1 mm) 350 kcmil 10011 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand6.QXD 7/10/2013 8:12 PM Page 191
192 FAX: 800-245-0329
15 kV: 3M™ Cold Shrink Splice Kits: Single Conductor (1/C): Inline
3M™ Cold Shrink QS-III Inline CN/JCN Splice Kits 5415A, 5416A, 5417A and 5418A
Series (continued)
Order No. UPC Insulation O.D. Range Conductor Size Connector Included Case Qty.
5417A 054007-42124 1.04"-1.70" (26,4-43,2 mm) 350-750 kcmil
(185-325 mm²)
-1
5417A-350-AL 054007-42125 1.04"-1.70" (26,4-43,2 mm) 350 kcmil 20011 1
5417A-350-CU 054007-44234 1.04"-1.70" (26,4-43,2 mm) 350 kcmil 10011 1
5417A-500-AL 054007-42126 1.04"-1.70" (26,4-43,2 mm) 500 kcmil 20014 1
5417A-500-CU 054007-44235 1.04"-1.70" (26,4-43,2 mm) 500 kcmil 10014 1
5417A-750-AL 054007-04587 1.04"-1.70" (26,4-43,2 mm) 750 kcmil 20019 1
5417A-750-CU 054007-04588 1.04"-1.70" (26,4-43,2 mm) 750 kcmil 10019 1
5417A-WG 054007-44090 1.04"-1.70" (26,4-43,2 mm) 350-750 kcmil
(185-325 mm²)
-1
5418A 054007-42128 1.08"-1.70" (27,4-43,2 mm) 500-1000 kcmil
(240-500 mm²)
-1
5418A-500-AL 054007-44403 1.08"-1.70" (27,4-43,2 mm) 500 kcmil 20014 1
5418A-500-CU 054007-44404 1.08"-1.70" (27,4-43,2 mm) 500 kcmil 10014 1
5418A-750-AL 054007-42129 1.08"-1.70" (27,4-43,2 mm) 750 kcmil 20019 1
5418A-750-CU 054007-44236 1.08"-1.70" (27,4-43,2 mm) 750 kcmil 10019 1
5418A-1000-AL 054007-42130 1.08"-1.70" (27,4-43,2 mm) 1000 kcmil 20024 1
5418A-1000-CU 054007-44237 1.08"-1.70" (27,4-43,2 mm) 1000 kcmil 10024 1
5418A-WG 054007-44091 1.08"-1.70" (27,4-43,2 mm) 500-1000 kcmil
(240-500 mm²)
-1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand6.QXD 7/10/2013 8:12 PM Page 192
\Tépe Shlelded Cable -.,:_ VWe Shielded Cable Unishield’Cable Langimdinally Corrugated (LC) Shielded Cable
PHONE: 800-245-3573 www.3M.com/Electrical 193
15 kV: 3M™ Cold Shrink Splice Kits: Single Conductor (1/C): Inline
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5513A, 5514A, 5515A and
5516A Series
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire
shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with
copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²). The cold shrink splice body is a one-piece molded design made of
special formulated silicone rubbers, while the cold shrink jacketing is made of EPDM rubber for physical protection. Each splice manufactured is factory
tested to provide reliability.
The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions
within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 150 kV (equal to a 25 kV voltage
class). The 5513A, 5514A, 5515A and 5516A QS-III splices meet or exceed the 15 kV Voltage Class rating requirements of IEEE 404. Each kit makes one
splice.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 15 kV
Number of Conductors Single Conductor
Shielding Type Tape Shield, Wire Shield, UniShield®,
Longitudinally Corrugated (LC) Shield
Splice Type Inline
Technology Cold Shrink
Order No. UPC Insulation O.D. Range Conductor Size Connector Included Case Qty.
5513A 051128-53480 0.64"-1.01" (16,3-25,7 mm) 2-4/0 AWG 1
5513A-2-AL 051128-53481 0.64"-1.01" (16,3-25,7 mm) 2 AWG 20003 1
5513A-2-CU 051128-53482 0.64"-1.01" (16,3-25,7 mm) 2 AWG 10003 1
5513A-1-AL 051128-53483 0.64"-1.01" (16,3-25,7 mm) 1 AWG 20004 1
5513A-1-CU 051128-53484 0.64"-1.01" (16,3-25,7 mm) 1 AWG 10004 1
5513A-1/0-AL 051128-53485 0.64"-1.01" (16,3-25,7 mm) 1/0 AWG 20005 1
5513A-1/0-CU 051128-53486 0.64"-1.01" (16,3-25,7 mm) 1/0 AWG 10005 1
5513A-2/0-AL 051128-53487 0.64"-1.01" (16,3-25,7 mm) 2/0 AWG 20006 1
5513A-2/0-CU 051128-53488 0.64"-1.01" (16,3-25,7 mm) 2/0 AWG 10006 1
5513A-3/0-AL 051128-53489 0.64"-1.01" (16,3-25,7 mm) 3/0 AWG 20007 1
5513A-3/0-CU 051128-53490 0.64"-1.01" (16,3-25,7 mm) 3/0 AWG 10007 1
5513A-4/0-AL 051128-53491 0.64"-1.01" (16,3-25,7 mm) 4/0 AWG 20008 1
5513A-4/0-CU 051128-53492 0.64"-1.01" (16,3-25,7 mm) 4/0 AWG 10008 1
5514A 054007-44101 0.84"-1.38" (21,3-35,1 mm) 4/0 AWG-500 kcmil 1
5514A-CA-1 051128-57151 0.64"-1.38" (16,3-35,1 mm) 2 AWG-500 kcmil 1
5514A-4/0-AL 054007-44102 0.84"-1.38" (21,3-35,1 mm) 4/0 AWG 20008 1
5514A-4/0-CU 054007-44103 0.84"-1.38" (21,3-35,1 mm) 4/0 AWG 10008 1
5514A-250-AL 054007-44104 0.84"-1.38" (21,3-35,1 mm) 250 kcmil 20009 1
5514A-250-CU 054007-44105 0.84"-1.38" (21,3-35,1 mm) 250 kcmil 10009 1
5514A-350-AL 054007-44106 0.84"-1.38" (21,3-35,1 mm) 350 kcmil 20011 1
5514A-350-CU 054007-44107 0.84"-1.38" (21,3-35,1 mm) 350 kcmil 10011 1
5514A-500-AL 054007-44407 0.84"-1.38" (21,3-35,1 mm) 500 kcmil 20014 1
5514A-500-CU 054007-44408 0.84"-1.38" (21,3-35,1 mm) 500 kcmil 10014 1
5515A 054007-42134 1.04"-1.70" (26,4-43,2 mm) 350-750 kcmil 1
5515A-350-AL 054007-42135 1.04"-1.70" (26,4-43,2 mm) 350 kcmil 20011 1
5515A-350-CU 054007-42898 1.04"-1.70" (26,4-43,2 mm) 350 kcmil 10011 1
5515A-500-AL 054007-42899 1.04"-1.70" (26,4-43,2 mm) 500 kcmil 20014 1
5515A-500-CU 054007-42136 1.04"-1.70" (26,4-43,2 mm) 500 kcmil 10014 1
5515A-750-AL 054007-42900 1.04"-1.70" (26,4-43,2 mm) 750 kcmil 20019 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand6.QXD 7/10/2013 8:12 PM Page 193
194 FAX: 800-245-0329
15 kV: 3M™ Cold Shrink Splice Kits: Single Conductor (1/C): Inline
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5513A, 5514A, 5515A and
5516A Series (continued)
Order No. UPC Insulation O.D. Range Conductor Size Connector Included Case Qty.
5515A-750-CU 054007-42137 1.04"-1.70" (26,4-43,2 mm) 750 kcmil 10019 1
5516A 054007-42139 1.08"-1.70" (27,4-43,2 mm) 500-1000 kcmil 1
5516A-500-AL 054007-44405 1.08"-1.70" (27,4-43,2 mm) 500 kcmil 20014 1
5516A-500-CU 054007-44406 1.08"-1.70" (27,4-43,2 mm) 500 kcmil 10014 1
5516A-750-AL 054007-43254 1.08"-1.70" (27,4-43,2 mm) 750 kcmil 20019 1
5516A-750-CU 054007-43255 1.08"-1.70" (27,4-43,2 mm) 750 kcmil 10019 1
5516A-1000-AL 054007-42901 1.08"-1.70" (27,4-43,2 mm) 1000 kcmil 20024 1
5516A-1000-CU 054007-42106 1.08"-1.70" (27,4-43,2 mm) 1000 kcmil 10024 1
15 kV: 3M™ Cold Shrink Splice Kits: Single Conductor (1/C): Branch
3M™ Cold Shrink Branch Splice Kit QS-2001B and 3M™ Cold Shrink Branch Splice
Adapter QS-2000BA
The 3M™ Cold Shrink Branch Splice QS-2001B molded rubber splice kit is designed to connect extruded dielectric power cables rated 15 kV. The basic kit
handles the main and branch cable range from 350–500 kcmil. (See note below for cable between 2 AWG-250 kcmil.) This kit utilizes the QS-2000 cold
shrink technology and consists of a multi-layer silicone rubber splice and stress control body, each expanded on a removable, supporting polymeric core.
Kits contain sufficient material to make one branch splice.
Note: For 2 AWG-250 kcmil cable, the 3M™ Cold Shrink Branch Splice Adapter QS-2000BA must be ordered and used in conjunction with the 3M™ Cold
Shrink Branch Splice Kit QS-2001B. The adapter kit will increase the cable insulation O.D. so that the cable will work with the splice body. Order one adapter
kit for each cable end (3 maximum/splice) below 350 kcmil (185 mm²) conductor size.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 15 kV
Number of Conductors Single Conductor Branch Splice
Shielding Type
Concentric Neutral (CN), Jacketed
Concentric Neutral (JCN), Tape Shield,
UniShield®, Wire Shield
Technology Cold Shrink
Order No. UPC Insulation O.D. Range Conductor Size Product
Type Suggested Accessory Case
Qty.
QS2001B 051128-55254 1.00"-1.35" (25,4-34,3 mm); or
0.64"-1.01" (16,2-25,6 mm) with QS-
2000BA Adapter Kit
2 AWG-500 kcmil (35-240 mm²)
Must use QS-2000BA Adapter Kit for 2 AWG-
250 kcmil (35-150 mm²)
Splice 3M™ Cold Shrink Branch
Splice Adapter Kit QS-
2000BA
1
QS2000B-A 051128-55255 N/A N/A Accessory N/A 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:58 PM Page 194
Three-Ccnduclor Non-Armored, Shielded Cable
PHONE: 800-245-3573 www.3M.com/Electrical 195
15 kV: 3M™ Cold Shrink Splice Kits: Three Conductor (3/C)
3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Cable Splice Kits 5775A-MT,
5776A-MT & 5777A-MT for 15 kV
3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Cable Splices 5775A-MT, 5776A-MT and 5777A-MT Series are designed for splicing 3-conductor,
armored and non-armored, shielded power cables. The kits are rated for use on 5/8 kV cables with conductor sizes from 3/0 AWG-1000 kcmil (95-500
mm²) or 15 kV cables with conductor sizes from 2 AWG-750 kcmil (35-325 mm²). The kits are designed to be used with 3M™ Scotchlok™ Connectors
10000 and 20000 Series or other UL listed inline compression connectors that fit within the dimension limits listed in the data sheet. Meets the
requirements of IEEE-404.
Kits include material necessary to make one 3/C splice. Connectors are not included and must be ordered separately. The completed splice is designed for
use in cable trays, weather exposed or direct burial locations.
The splice utilizes several technologies to accommodate the various functions of a 3/C shielded power cable: 3M™ Cold Shrink QS-III Splice Bodies,
Scotch® Tapes for moisture sealing, Constant Force Springs for connecting ground braid jumpers and sheath wrap for replacing the cable armor and/or
jacket.
Note: When making a trifurcating splice, the 3M™ Cold Shrink MT-C or MT-E Trifurcating Accessory Kit must be used along with the splice kit.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 5/8 kV, 15 kV
Number of Conductors Three Conductors
Shielding Type Shielded Armored or Non-Armored
Splice Type Inline, Trifurcating
Technology Cold Shrink, Sheath Wrap
Order No. UPC Insulation O.D. Range Conductor Size, 15 kV Typical Splice
Length Suggested Accessory Case
Qty.
5775A-MT 051128-53493 0.64"-1.01"
(16,3-25,7 mm)
2-4/0 AWG
(35-95 mm²)
52.0"
(1320,8 mm)
3M™ Trifurcating Accessory for 3-C to
3 Single Conductors MT-C
1
5776A-MT 054007-44112 0.84"-1.38"
(21,3-35,1 mm)
4/0 AWG-500 kcmil
(95-240 mm²)
54.0"
(1371,6 mm)
3M™ Trifurcating Accessory for 3-C to
3 Single Conductors MT-C; or
3M™ Trifurcating Accessory for 3-C to
3 Single Conductors MT-E
1
5777A-MT 054007-44289 1.04"-1.70"
(26,4-43,2 mm)
350-750 kcmil
(185-325 mm²)
58.0"
(1473,2 mm)
3M™ Trifurcating Accessory for 3-C to
3 Single Conductors MT-E
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:58 PM Page 195
Selection Table 3"" SplballeA-M'l I! kw mm ml) mm In Mon Kn Typical Cnnuucmr Swze Range rAWG/kbmil 5775AMT 274/0 MTrC 5776A-MT 4/0-250 MT-C 5776A7MT 3507500 MTVE ThreeCendmov Nonmmoved, Shwe‘ded Cab‘e
196 FAX: 800-245-0329
15 kV: 3M™ Cold Shrink Splice Kits: Three Conductor (3/C)
3M™ Cold Shrink MT-C & MT-E
Trifurcating Accessory Kits (One 3/C to
Three 1/C) for 15 kV
3M™ Cold Shrink MT-C and MT-E Trifurcating Accessory Kits are used to
break out and seal a transition from 3/C to three 1/C.
For use with 3M™ Cold Shrink QS-III Splicing Series 5700A-MT.
Note: Cable sizes shown below are for standard insulation thickness.
Final determining factor is cable insulation O.D.
Voltage: 15 kV
Number of Conductors: One 3/C to three 1/C
Order No. UPC Single Conductor Jacket O.D. Kits per Case
MT-C 051128-55208 0.62"-1.13" (15,7-28,7 mm) 1
MT-E 051128-54318 1.13"-1.80" (28,7-45,7 mm) 1
3M™ Cold Shrink 3/C Inline Shielded, Armored or Non-Armored Splice Kits 5760
Series for 15 kV
These splice kits are designed for splicing shielded armored and non-armored cables, 5/8 kV and 15 kV. Each kit makes one 3/C splice. Connectors are not
included and must be ordered separately.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 5/8 kV, 15 kV
Number of Conductors Three Conductors
Shielding Type Shielded Armored or Non-Armored
Splice Type Inline
Technology Cold Shrink, Resin
RoHS 2011/65/EU Yes
Order No. UPC Insulation O.D. Range Conductor Size, 15 kV
Max.
Connector
O.D.
Max.
Connector
Length
Typical
Splice
Length
Case
Qty.
5761 051128-59172 0.65"-1.00"
(16,5-25,4 mm)
2-3/0 AWG
(35-80 mm²)
0.90"
(22,9 mm)
2.75"
(69,9 mm)
29.0"
(737 mm)
1
5762 051128-59170 0.93"-1.94"
(23,6-49,3 mm)
Cu: 4/0 AWG-750 kcmil
(120-325 mm²)
Al: 4/0 AWG-500 kcmil
(120-250 mm²)
1.40"
(35,5 mm)
5.00"
(127,0
mm)
44.0"
(1118 mm)
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:58 PM Page 196
VConc/entric Neutral (CN) Cable 7 , _ r % Jacketed Concentric Neutral (JCN) Cable
PHONE: 800-245-3573 www.3M.com/Electrical 197
15 kV: 3M™ Molded Rubber Splice Kits: Single Conductor (1/C)
3M™ Molded Rubber QS-II Inline JCN/CN Splice Kits 5411, 5411A and 5412 Series
3M™ Molded Rubber QS-II Inline JCN/CN Splices 5411, 5411A and 5412 Series are one-piece inline splices designed for use on 15 kV rated CN and JCN
cable. Meets the requirements of IEEE 404. Splice can be ordered with the special CI-Series connector packed in the kit, or the kit and connector can be
ordered as separate items.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 15 kV
Number of Conductors Single Conductor
Shielding Type Concentric Neutral (CN), Jacketed
Concentric Neutral (JCN)
Splice Type Inline
Technology Molded Rubber
Order No. UPC Insulation O.D. Range Conductor Size, Stranded Conductor Size, Solid Connector Included Case Qty.
5411 054007-11852 0.637"-0.900" (16,2-22,9 mm) 4 - 2/0 AWG (175 mil) 2-1/0 AWG 1
5411-CI-1/0 054007-11855 0.637"-0.900" (16,2-22,9 mm) 1/0 AWG - CI-1/0 1
5411-CI-2 054007-08005 0.637"-0.900" (16,2-22,9 mm) 2 AWG 1 AWG CI-2 1
5411-CI-21 054007-11853 0.637"-0.900" (16,2-22,9 mm) 2 AWG, 1 AWG 1 AWG, 1/0 AWG CI-21 1
5411-CI-22 054007-11854 0.637"-0.900" (16,2-22,9 mm) 4 AWG (220 mil) 2 AWG CI-22 1
5411-20006 054007-11861 0.637"-0.900" (16,2-22,9 mm) 2/0 AWG (175 mil) - 20006 1
5411A 054007-09937 0.775"-0.900" (19,7-22,9 mm) 1 AWG (220 mil)
1/0 AWG (220 mil)
2/0 AWG (175 mil)
1/0 AWG (220 mil) - 1
5411A-CI-1 054007-09938 0.775"-0.900" (19,7-22,9 mm) 1 AWG (220 mil) 1/0 AWG (220 mil) CI-1 1
5411A-CI-1/0 054007-09939 0.775"-0.900" (19,7-22,9 mm) 1/0 AWG (220 mil) - CI-1/0 1
5411A-20006 054007-09940 0.775"-0.900" (19,7-22,9 mm) 2/0 AWG (175 mil) - 20006 1
5412 054007-11862 0.840"-1.050" (21,3-26,7 mm) 2/0 AWG (220 mil)
3/0-4/0 AWG
250 kcmil (175 mil)
--1
5412-CI-2/0 054007-11865 0.840"-1.050" (21,3-26,7 mm) 2/0 AWG (220 mil) - CI-2/0 1
5412-CI-3/0 054007-11863 0.840"-1.050" (21,3-26,7 mm) 3/0 AWG - CI-3/0 1
5412-CI-4/0 054007-11864 0.840"-1.050" (21,3-26,7 mm) 4/0 AWG - CI-4/0 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:58 PM Page 197
Conc/entric Neutral (CN) Cable Jacketed Concentric Neutral (JCN) Cable
198 FAX: 800-245-0329
15 kV: 3M™ Molded Rubber Splice Kits: Single Conductor (1/C)
3M™ Molded Rubber QS Inline JCN/CN Splice Kits 5400 Series
3M™ Molded Rubber QS Inline JCN/CN Splice Kits 5400 Series are inline splices designed for use on 15 kV concentric neutral (CN) or jacketed concentric
neutral (JCN) cable. The continuous current rating of each splice is equal to the current rating of the cable it is sized to accommodate. Meets requirements
of IEEE 404 for cable joints. Jacketing kit is needed for JCN cable.
Each kit makes one splice. Connectors, unless specified, are not included in the kit, and must be ordered separately.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 15 kV
Number of Conductors Single Conductor
Splice Type Inline
Shielding Type Concentric Neutral (CN), Jacketed
Concentric Neutral (JCN)
Technology Molded Rubber
Order No. UPC Insulation O.D. Range Conductor Size, Stranded Connector Included Case Qty.
5403 054007-11818 0.795"-0.940" (20,2-23,9 mm) 2/0-4/0 AWG 1
5404 054007-11826 0.920"-1.080" (23,4-27,4 mm) 2/0-4/0 AWG 1
5405 054007-11834 0.920"-1.080" (23,4-27,4 mm) 250-350 kcmil 1
5406 054007-11842 1.060"-1.210" (26,9-30,7 mm) 250 (220 mil)-350 kcmil 1
5406-CI-350 054007-41907 1.060"-1.210" (26,9-30,7 mm) 350 kcmil CI-350 1
5407 054007-25602 1.120"-1.320" (28,5-33,5 mm) 500 kcmil 1
5407-CI-500 054007-02315 1.120"-1.320" (28,5-33,5 mm) 500 kcmil CI-500 1
5408 054007-25610 1.320"-1.520" (33,5-38,6 mm) 750 kcmil 1
5408-CI-750 054007-02314 1.320"-1.520" (33,5-38,6 mm) 750 kcmil CI-750 1
5408-CCI-750 054007-41709 1.320"-1.520" (33,5-38,6 mm) 750 kcmil CCI-750 1
5409 054007-11859 1.490"-1.660" (37,8-42,2 mm) 750 kcmil 1
5409-CI-750 054007-30209 1.490"-1.660" (37,8-42,2 mm) 750 kcmil CI-750 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:58 PM Page 198
Conc/entric Neutral (CN) Cable ‘ —r 7 , _ r % Jacketed Concentric Neutral (JCN) Cable H7 7 m if if 7%
PHONE: 800-245-3573 www.3M.com/Electrical 199
15 kV: 3M™ Molded Rubber Splice Kits: Single Conductor (1/C)
3M™ Molded Rubber QS-II JCN/CN Cable Repair Splice Kits 5411R and 5412R
Series
3M™ Molded Rubber QS-II JCN/CN Cable Repair Splice Kit 5411R and 5412R Series are specially elongated molded rubber splices designed to repair
damaged cable. They can be used on 15 kV copper or aluminum, CN or JCN cables. It is designed to replace up to 6" (152 mm) of damaged cable, thus
virtually eliminating the need to splice in a new section of cable with two separate splices.
Meets the requirements of IEEE 404. The 5411R/5412R can be ordered with the special CIR-Series connector packed in the kit or the kit and connector can
be ordered as separate items. Each kit makes one repair splice.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 15 kV
Number of Conductors Single Conductor
Shielding Type Concentric Neutral (CN), Jacketed
Concentric Neutral (JCN)
Splice Type Inline Repair
Technology Molded Rubber
Order No. UPC Insulation O.D. Range Conductor Size, Stranded Conductor Size, Solid Connector Included Case
Qty.
5411R 054007-09352 0.637"-0.900"
(16,3-22,9 mm)
4 AWG (220 mil only);
2-1/0 AWG
2-1/0 AWG - 1
5411R-CIR-2 051128-55097 0.637"-0.900"
(16,3-22,9 mm)
2 AWG - CIR-2 1
5411R-CIR-1/0 054007-09355 0.637"-0.900"
(16,3-22,9 mm)
1/0 AWG - CIR-1/0 1
5411R-CIR-1/0-2-10002 054007-44273 0.637"-0.900"
(16,3-22,9 mm)
1/0 AWG - One CIR-1/0; and
Two 10002
1
5411R-CIR-21 054007-09354 0.637"-0.900"
(16,3-22,9 mm)
2-1 AWG 1-1/0 AWG CIR-21 1
5411R-CIR-22 054007-09353 0.637"-0.900"
(16,3-22,9 mm)
4 AWG (220 mil only) 2 AWG CIR-22 1
5412R-CIR-2/0 051128-57179 0.870"-1.055"
(22,1-26,9 mm)
2/0 AWG (220 mil) - CIR-2/0 1
5412R-CIR-3/0 054007-43501 0.870"-1.055"
(22,1-26,9 mm)
3/0 AWG - CIR-3/0 1
5412R-CIR-4/0 054007-50101 0.870"-1.055"
(22,1-26,9 mm)
4/0 AWG - CIR-4/0 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 7:58 PM Page 199
Tape Shielded Cable ' l- Shielded Cable WI re iShield" Cable
200 FAX: 800-245-0329
15 kV: 3M™ Molded Rubber Splice Kits: Single Conductor (1/C)
3M™ Molded Rubber QS-II Inline Shielded Cable Splice Kits 5500 Series
3M™ Molded Rubber QS-II Inline Shielded Cable Splices 5500 Series are inline splices designed for use on 15 kV copper or aluminum Tape Shielded, Wire
Shielded and UniShield® cable from 4 AWG-750 kcmil. The continuous current rating of each splice is equal to the current rating of the cable it is sized to
accommodate. Meets requirements of IEEE 404.
Each kit makes one splice. A special CI-Series Connector is necessary to complete the splice. Order the connector separately or as part of the kit.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 15 kV
Number of Conductors Single Conductor
Shielding Type Tape Shield, Wire Shield, UniShield®
Splice Type Inline
Technology Molded Rubber
Order No. UPC Insulation O.D. Range Conductor Size, Stranded, Cu or Al Conductor Size, Solid, Cu or Al Connector
Included
Case
Qty.
5501 054007-12293 0.637"-0.900" (16,2-22,9 mm) 4-1/0 AWG
2/0 AWG (175 mil)
2-1/0 AWG - 1
5501-CI-21 054007-09628 0.637"-0.900" (16,2-22,9 mm) 2-1 AWG 1-1/0 AWG CI-21 1
5501-CI-1/0 054007-09629 0.637"-0.900" (16,2-22,9 mm) 1/0 AWG - CI-1/0 1
5501-20006 054007-09630 0.637"-0.900" (16,2-22,9 mm) 2/0 AWG (175 mil) - 20006 1
5502 054007-12294 0.840"-1.050" (21,3-26,7 mm) 2/0 AWG (220 mil)
3/0-4/0 AWG
250 kcmil (175 mil)
4/0 AWG - 1
5502-CI-2/0 054007-09631 0.840"-1.050" (21,3-26,7 mm) 2/0 AWG (220 mil) - CI-2/0 1
5502-CI-3/0 054007-09632 0.840"-1.050" (21,3-26,7 mm) 3/0 AWG 4/0 AWG CI-3/0 1
5502-CI-4/0 054007-09633 0.840"-1.050" (21,3-26,7 mm) 4/0 AWG - CI-4/0 1
5502-20009 054007-09634 0.840"-1.050" (21,3-26,7 mm) 250 kcmill (175 mil) - 20009 1
5503 054007-12295 1.060"-1.210" (26,9-30,7 mm) 250 kcmil (220 mil)
350 kcmil
--1
5503-CI-250 054007-09635 1.060"-1.210" (26,9-30,7 mm) 250 kcmil (220 mil) - CI-250 1
5503-CI-350 054007-09636 1.060"-1.210" (26,9-30,7 mm) 350 kcmil - CI-350 1
5504 054007-12296 1.120"-1.320" (28,4-33,5 mm) 500 kcmil - - 1
5504-CI-500 054007-09637 1.120"-1.320" (28,4-33,5 mm) 500 kcmil - CI-500 1
5505 054007-12297 1.320"-1.520" (33,5-38,6 mm) 750 kcmil - - 1
5505-CI-750 054007-09638 1.320"-1.520" (33,5-38,6 mm) 750 kcmil - CI-750 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 8:00 PM Page 200
PHONE: 800-245-3573 www.3M.com/Electrical 201
15 kV: 3M™ Molded Rubber Splice Kits: Single Conductor (1/C)
3M™ Aluminum Repair Connectors CIR Series for
3M™ Rubber Splices 5411R & 5412R Series
Meets the requirements of ANSI C119.4
Connector Base Metal Aluminum
For use with Aluminum or Copper Conductor
Order No. UPC Conductor Size, Stranded Conductor Size,
Solid Length Outside Diameter (O.D.) Compatible with Case Qty.
CIR-22 054007-09356 4 AWG (220 mil insulation only) 2 AWG 8.0" (203,2 mm) 0.64" (16,2 mm) 5411R Splice Body 10
CIR-2 054007-11966 2 AWG - 8.0" (203,2 mm) 0.64" (16,2 mm) 5411R Splice Body 10
CIR-21 054007-09357 2 AWG, 1 AWG 1 AWG, 1/0 AWG 8.0" (203,2 mm) 0.64" (16,2 mm) 5411R Splice Body 10
CIR-1/0 054007-09358 1/0 AWG - 8.0" (203,2 mm) 0.64" (16,2 mm) 5411R Splice Body 10
CIR-2/0 054007-41964 2/0 AWG (220 mil insulation only) - 9.0" (228,6 mm) 0.91" (23,1 mm) 5412R Splice Body 10
CIR-3/0 054007-41965 3/0 AWG - 9.0" (228,6 mm) 0.91" (23,1 mm) 5412R Splice Body 10
CIR-4/0 054007-50228 4/0 AWG - 9.0" (228,6 mm) 0.91" (23,1 mm) 5412R Splice Body 10
3M™ Connectors CI Series for 3M™ Rubber
Splices 5400 & 5500 Series
Meets the requirements of ANSI C119.4
Connector Base Metal Aluminum
For use with Aluminum or Copper Conductor
Order No. UPC Conductor Size, Stranded, Cu or Al Connector O.D. Case Qty.
CI-2/0 054007-11875 2/0 AWG 0.910" (23,1 mm) 10
CI-3/0 054007-11883 3/0 AWG 0.910" (23,1 mm) 10
CI-4/0 054007-11891 4/0 AWG 0.910" (23,1 mm) 10
CI-250 054007-11909 250 kcmil 1.125" (28,6 mm) 10
CI-350 054007-11925 350 kcmil 1.125" (28,6 mm) 10
CI-450 054007-11933 500 kcmil (Compact) 1.312" (33,3 mm) 10
CI-500 054007-25644 500 kcmil 1.312" (33,3 mm) 10
CI-650 054007-11941 750 kcmil (Compact) 1.590" (40,4 mm) 10
CI-750 054007-25651 750 kcmil 1.590" (40,4 mm) 10
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 8:00 PM Page 201
202 FAX: 800-245-0329
15 kV: 3M™ Molded Rubber Splice Kits: Single Conductor (1/C)
3M™ Connectors CI Series for 3M™ Rubber
Splices 5411, 5411A, 5412 & 5500 Series
Meets the requirements of ANSI C119.4
Connector Base Metal Aluminum
For use with Aluminum or Copper Conductor
Order No. UPC Conductor Size, Stranded, Cu or Al Conductor Size, Solid, Cu or Al Connector O.D. Case Qty.
20006 054007-13285 2/0 AWG - 0.687" (17,4 mm) 10
20009 054007-13319 250 kcmil - 0.906" (23,0 mm) 3
CI-1/0 054007-11867 1/0 AWG - 0.640" (16,2 mm) 10
CI-2 054007-11651 2 AWG 1 AWG 0.640" (16,2 mm) 10
CI-2/0 054007-11875 2/0 AWG - 0.910" (23,1 mm) 10
CI-21 054007-11856 2, 1 AWG 1, 1/0 AWG 0.640" (16,2 mm) 10
CI-22 054007-25636 4 AWG 2 AWG 0.640" (16,2 mm) 10
CI-3/0 054007-11883 3/0 AWG - 0.910" (23,1 mm) 10
CI-4/0 054007-11891 4/0 AWG - 0.910" (23,1 mm) 10
3M™ Aluminum Transition Connectors CI-T
Series for 5411 & 5500 Series
Meets the requirements of ANSI C119.4
Connector Base Metal Aluminum
For use with Aluminum or Copper Conductor
Order No. UPC Conductor Size, Cable A –
Stranded (Solid)
Conductor Size, Cable B –
Stranded (Solid) Outside Diameter (O.D.) Case Qty.
CI-T-1 054007-11958 4 AWG (2 AWG ) 1 AWG (1/0 AWG ) 0.64" (16,2 mm) 10
CI-T-2 054007-11966 2 AWG (1 AWG ) 1 AWG (1/0 AWG ) 0.64" (16,2 mm) 10
CI-T-3 054007-11974 4 AWG (2 AWG) 1/0 AWG Stranded 0.64" (16,2 mm) 10
CI-T-4 054007-11982 2 AWG (1 AWG) 1/0 AWG Stranded 0.64" (16,2 mm) 10
CI-T-5 054007-11990 2 AWG (1 AWG) 4 AWG (2 AWG) 0.64" (16,2 mm) 10
CI-T-9 054007-44533 1 AWG (1/0 AWG) 1/0 AWG Stranded 0.64" (16,2 mm) 10
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 8:00 PM Page 202
1! m. 3mm 2... Wm sun-mm cam. numun’ Cam: -—I mnwwmuycwwzummsm- nucam my mum-n um Cumin Mumm- u 4 - \ -V,,'; -72;
PHONE: 800-245-3573 www.3M.com/Electrical 203
15 kV: 3M™ PILC Splice Kits: Single Conductor (1/C)
3M™ Cold Shrink QS-III 1/C Inline Transition Splice Kits 5510A-1T-PILC Series
3M™ Cold Shrink QS-III 1/C Inline Transition Splice Kit 5510A-1T-PILC Series (which includes 5513A-1T-PILC, 5514A-1T-PILC, 5515A-1T-PILC, and 5516A-
1T-PILC) are 15 kV class inline splices designed to transition single-conductor PILC to Poly/EPR cable and meet the 15 kV voltage class rating requirements
of IEEE 404.
The splice kits include an oil barrier system based on a cold shrink tube design of specially formulated, oil-resistant polymer, that is laboratory tested to
nominal internal pressures of 40 psi with no oil leakage. The splice body itself is a one-piece molded QS-III design made of specially formulated silicone
rubber. An EPDM rubber fold-back cold shrink jacket is included for physical protection and environmental sealing.
Each kit contains sufficient material to make one splice. Connector is not provided with the kits due to customer specific application requirements. To
ensure a positive oil stop, a non-tapered, sealed connector (with a solid center barrier) should be used.
*4 AWG requires use of Al connector as #4 Cu connector is below min. O.D. for the 5513A-1T-PILC kit.
**2/0 AWG & 3/0 AWG require use of Al connector as Cu connectors are below min. O.D. for the 5514A-1T-PILC kit.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 15 kV
Number of Conductors Single Conductor
Shielding Type Paper Insulated Lead Covered (PILC)
Splice Type Inline PILC Transition
Technology Cold Shrink
Order No. UPC
051138-
Max. O.D. Over
Lead Sheath
PILC Cable
Insul. O.D.
Poly/EPR Cable
Insul. O.D.
PILC Cable Conductor
Size 100%
PILC Cable Conductor
Size 133%
Poly/EPR Cable
Conductor Size
Case
Qty.
5513A-1T-PILC 94339 1.01"
(25,6 mm)
0.59"-0.83"
(15-21 mm)
0.64"-1.01"
(16-26 mm)
*4-4/0 AWG
(22-95 mm²)
*4-1/0 AWG
(22-50 mm²)
2-4/0 AWG
(35-95 mm²)
1
5514A-1T-PILC 94340 1.23"
(31,2 mm)
0.79"-1.07"
(20-27 mm)
0.84"-1.38"
(22-35 mm)
4/0 AWG-500 kcmil
(120-240 mm²)
**2/0 AWG-250 kcmil
(70-120 mm²)
4/0 AWG-500 kcmil
(95-240 mm²)
1
5515A-1T-PILC 94341 1.53"
(38,9 mm)
1.07"-1.32"
(28-33 mm)
1.04"-1.70"
(27-43 mm)
500-750 kcmil
(300-325 mm²)
250-550 kcmil
(150-250 mm²)
300-750 kcmil
(185-325 mm²)
1
5516A-1T-PILC 94342 1.85"
(47,0 mm)
1.24"-1.63"
(32-41 mm)
1.08"-1.70"
(28-43 mm)
750-1000 kcmil
(400-500 mm²)
500-1000 kcmil
(300-500 mm²)
500-1000 kcmil
(240-500 mm²)
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 8:00 PM Page 203
I "be swam we -—I w": 5mm Came umshiem' cm -' , a z» mam mum (me I? (nnuemn: Numil m on. -’ mm mum Neulml uzmunk - u . szrflnsuhltd wdzwaeammcaw
204 FAX: 800-245-0329
15 kV: 3M™ PILC Splice Kits: Single Conductor (1/C)
3M™ Cold Shrink Splice Kits QS-2000T 1/C PILC to 1/C Poly/EPR or 1/C PILC to 1/C
PILC Cable Splices
The 3M™ Cold Shrink Splice Kit QS-2000T Series allows you to splice either single-conductor PILC cable to single-conductor PILC cable, or single-
conductor PILC cable to single-conductor Poly/EPR cable. Because of the design of the splice, size transitions can also be accommodated rather easily. The
3M™ Cold Shrink Splice Kit QS-2000T Series meets the requirements of IEEE 404.
Use 3M™ Scotchlok™ Connectors 2000T Series with these splice kits. Each kit contains sufficient quantities of material to make one splice.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 15 kV
Number of Conductors Single Conductor
Shielding Type Paper Insulated Lead Covered (PILC)
Splice Type Inline PILC Transition or Inline PILC
Technology Cold Shrink
Order No. UPC
054007-
PILC Cable Insul. O.D.
Range
PILC Cable Conductor
Size
Poly/EPR Cable Insul.
O.D. Range
Poly/EPR
Cable
Conductor
Size
Connector
O.D. Range Connector Max. Length Case
Qty.
QS2011T 50546 0.56-0.88"
(14,2-22,4 mm)
4-3/0 AWG
(25-70 mm²)
0.70"-1.07"
(17,8-27,2 mm)
1-4/0 AWG
(50-95 mm²)
0.70"-1.02"
(17,8-25,8
mm)
Al: 5.0" (127 mm)
Cu: 5.5" (140 mm)
1
QS2012T 50547 0.74"-1.17"
(18,8-29,7 mm)
3/0 AWG-350 kcmil
(95-185 mm²)
0.88"-1.36"
(22,0-34,6 mm)
4/0 AWG-500
kcmil
(120-240 mm²)
0.90"-1.30"
(23,0-51,0
mm)
Al: 5.2" (132 mm)
Cu: 5.5" (140 mm)
1
QS2013T 50555 0.98"-1.56"
(24,9-39,6 mm)
400-1000 kcmil
(200-500 mm²)
1.12"-1.70"
(28,4-43,2 mm)
500-1000 kcmil
(240-500 mm²)
1.10"-1.66"
(28,0-42,0
mm)
Al: 6.5" (165 mm)
Cu: 7.5" (190 mm)
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 8:00 PM Page 204
Z I; YER 5mm came ‘, w". swam cm. umsme‘d'cb‘e -:- I mm mxwrmaobk p Mammamm p; Ja:kz(ed(m
PHONE: 800-245-3573 www.3M.com/Electrical 205
15 kV: 3M™ PILC Splice Kits: Three Conductor (3/C)
3M™ Cold Shrink Splice Kits QS-2000-3T and QS-2000-3T-WS 3/C PILC to 1/C
Poly/EPR Cable Trifurcating Splices
3M™ Cold Shrink Splice Kit QS-2000-3T and QS-2000-3T-WS Trifurcating Transition Splices are rated 15 kV. They are specially designed splice kits for
connecting one 3/C Paper Insulated Lead Covered (PILC) cable to three 1/C Poly/EPR insulated cables. Splices meet the requirements of IEEE 404.
3M™ Scotchlok™ Connector 2000T Series are recommended for use with these kits and must be ordered separately. Each kit makes one 3/C to three 1/C
splice.
*QS-2000-3T-WS uses wrap around heat shrink rejacketing.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 15 kV
Number of Conductors Three Conductor to Single Conductor
Shielding Type Paper Insulated Lead Covered (PILC)
Splice Type PILC Trifurcating
Technology Cold Shrink
Order No. UPC
054007-
PILC Cable Conductor
Size
Poly/EPR Cable
Conductor Size
Poly/EPR Cable Insul.
O.D. Range
Connector
O.D. Range Connector Max. Length Case
Qty.
QS2011-3T 42021 4-3/0 AWG
(25-70 mm²)
1-4/0 AWG
(50-95 mm²)
0.70"-1.07"
(17,8-27,2 mm)
0.70"-1.02"
(17,8-25,8
mm)
Al: 5.0" (127 mm);
Cu: 5.5" (140 mm)
1
QS2012-3T 42022 3/0 AWG-250 kcmil
(95-120 mm²)
4/0 AWG-500 kcmil
(120-240 mm²)
0.88"-1.36"
(22,0-34,6 mm)
0.90"-1.30"
(22,9-33,0
mm)
Al: 5.2" (132 mm);
Cu: 5.5" (140 mm)
1
QS2012/13-3T 44202 350-500 kcmil
(195-240 mm²)
250-500 kcmil
(120-240 mm²)
0.91"-1.36"
(23,0-34,6 mm)
0.90"-1.30"
(22,9-33,0
mm)
Al: 5.2" (132 mm);
Cu: 5.5" (140 mm)
1
QS2013-3T 42023 400-800 kcmil
(200-400 mm²)
500-1000 kcmil
(240-500 mm²)
1.12"-1.70"
(28,0-43,0 mm)
1.10"-1.66"
(28,0-42,0
mm)
Al: 6.5" (165 mm);
Cu: 7.5" (190 mm)
1
QS2011-3T-WS* 43248 4-3/0 AWG
(25-70 mm²)
1-4/0 AWG
(50-95 mm²)
0.70"-1.07"
(17,8-27,2 mm)
0.70"-1.02"
(17,8-25,8
mm)
Al: 5.0" (127 mm);
Cu: 5.5" (140 mm)
1
QS2012-3T-WS* 04211 3/0 AWG-250 kcmil
(95-120 mm²)
4/0 AWG-500 kcmil
(120-240 mm²)
0.88"-1.36"
(22,0-34,6 mm)
0.90"-1.30"
(22,9-33,0
mm)
Al: 5.2" (132 mm);
Cu: 5.5" (140 mm)
1
QS2012/13-3T-WS* 04644 350-500 kcmil
(195-240 mm²)
250-500 kcmil
(120-240 mm²)
0.91"-1.36"
(23,0-34,6 mm)
0.90"-1.30"
(22,9-33,0
mm)
Al: 5.2" (132 mm);
Cu: 5.5" (140 mm)
1
QS2013-3T-WS* 04212 400-800 kcmil
(200-400 mm²)
500-1000 kcmil
(240-500 mm²)
1.12"-1.70"
(28,0-43,0 mm)
1.10"-1.66"
(28,0-42,0
mm)
Al: 6.5" (165 mm);
Cu: 7.5" (190 mm)
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 8:00 PM Page 205
fine swam cam; ;, wmmmmm ‘ - ,7. unmewd'came r- m in mg on”? macaw .7: (we/um mummy me -: mm (mm mamcmcame n, anr m... mum ma (mam! (an n.» I{ i m(mmmmuhmmcmmmom
206 FAX: 800-245-0329
15 kV: 3M™ PILC Splice Kits: Three Conductor (3/C)
3M™ Cold Shrink 3/C PILC to 3/C Poly/EPR Cable Transition Splice Kit QS-2013-3T-
3C
The 3M™ Cold Shrink Splice Kit QS-2013-3T-3C is rated for 15 kV cables. It is specially designed for connecting 3/C shielded or belted Paper Insulated
Lead Covered (PILC) cable to 3/C shielded Poly/EPR insulated cables. The splice meets the requirements of IEEE 404.
3M™ Scotchlok™ Connector 2000T Series are recommended for this kit and must be ordered separately. Each kit has sufficient material to make one 3/C
to 3/C splice.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 15 kV
Number of Conductors Three Conductor
Shielding Type Paper Insulated Lead Covered (PILC)
Splice Type Inline PILC Transition
Technology Cold Shrink
Order No. UPC
054007-
PILC Cable Conductor
Size
Poly/EPR Cable
Conductor Size
Poly/EPR Cable Insul. O.D.
Range
Connector
O.D. Range Connector Max. Length Case
Qty.
QS2013-3T-3C 43247 400-800 kcmil
(200-400 mm²)
500-750 kcmil
(240-325 mm²)
1.12"-1.70"
(28,4-43,2 mm)
1.10"-1.66"
(28,0-42,0
mm)
Al: 6.5" (165 mm);
Cu: 7.5" (190 mm)
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand9.QXD 7/10/2013 8:11 PM Page 206
PHONE: 800-245-3573 www.3M.com/Electrical 207
15 kV: 3M™ PILC Splice Kits: Three Conductor (3/C)
3M™ Scotchlok™ Connectors 2000T-CU for 15
kV
The 3M™ Scotchlok™ Connectors 2000T-CU Series are copper inline sleeves for use
with copper conductor cables of the same size and are specifically designed for use with
PILC power cable. They can be used on concentric, compressed, and compact stranded
conductors. A rounding die is recommended to round out the sector shape of the
connector when used with sector shaped conductors. The 2000T-CU connectors, like all
2000T series connectors, have a solid center oil stop and meet ANSI Standard C-119.4.
They are designed for use with splice kits from the 3M™ Cold Shrink Splice Kit QS-
2000T Series, the 3M™ Cold Shrink Splice Kit QS-2000-3T Series, the 3M™ Cold Shrink
CS500Pb Series, and the Scotch® Tape Splice Kits 5700 Series. Meets the requirements
of ANSI C119.4
Connector Base Metal Copper
For use with Copper Conductor
Order No. UPC Stranded Conductor Size Length Outside Diameter (O.D.) Min. Order Qty. Case Qty.
2000T-2-CU 054007-42247 2 AWG 5.32" (135,1 mm) 0.700" (17,8 mm) 9 9
2000T-2/0-CU 054007-42250 2/0 AWG 5.32" (135,1 mm) 0.700" (17,8 mm) 3 3
2000T-4/0-CU 054007-42252 4/0 AWG 5.25" (133,3 mm) 0.880" (22,3 mm) 3 3
2000T-250-CU 054007-42253 250 kcmil 5.25" (133,3 mm) 0.880" (22,3 mm) 3 3
2000T-500-CU 054007-42258 500 kcmil 6.90" (175,3 mm) 1.125" (28,6 mm) 3 3
2000T-750-CU 054007-42263 750 kcmil 6.90" (175,3 mm) 1.300" (33,0 mm) 3 3
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand9.QXD 7/10/2013 8:11 PM Page 207
208 FAX: 800-245-0329
15 kV: 3M™ PILC Splice Kits: Three Conductor (3/C)
3M™ Scotchlok™ Reducer Series Connectors 2000T-CU/AL
for 15 kV
The 3M™ Scotchlok™ Reducer Series Connectors 2000T-CU/ AL are aluminum inline sleeves that are
applicable for both aluminum and copper conductors and specifically designed for use with PILC power cable.
The barrel inner diameters on each end are different, allowing the connection of different size conductors.
These connectors can be used on concentric, compressed, and compact stranded conductors. A rounding die
is recommended to round out the sector shape of the connector when used with sector shaped conductors.
The 2000T Reducer Series connectors, like all 2000T series connectors, have a solid center oil stop and meet
ANSI Standard C-119.4. They are designed for use with splice kits from the 3M™ Scotchlok™ 2000T Series,
the 3M™ Scotchlok™ 2000-3T Series, the 3M™ Cold Shrink Splice Kits Selection CS500Pb Series, and the
Scotch® Tape Splice Kits 5700 Series. Each connector is electro-tin plated to resist electrolytic corrosion.
Meets the requirements of ANSI C119.4
Connector Base Metal Aluminum
For use with Copper or Aluminum Conductor
Order No. UPC Stranded Conductor Size Length Outside Diameter
(O.D.) Min. Order Qty. Case Qty.
2000T 2-1/0 CU/AL 054007-42226 2–1/0 AWG 4.74" (120,4 mm) 0.640" (16,2 mm) 9 9
2000T 1/0-2/0 CU/AL 054007-42228 1/0–2/0 AWG 4.70" (119,4 mm) 0.910" (23,1 mm) 3 3
2000T 2/0-4/0 CU/AL 054007-42229 2/0–4/0 AWG 4.70" (119,4 mm) 0.910" (23,1 mm) 3 3
2000T 250-350 CU/AL 054007-42232 250–350 kcmil 4.70" (119,4 mm) 1.125" (28,6 mm) 3 3
2000T 350-500 CU/AL 054007-42234 350–500 kcmil 4.70" (119,4 mm) 1.320" (33,5 mm) 3 3
2000T 500-750 CU/AL 054007-42236 500–750 kcmil 6.25" (158,7 mm) 1.600" (40,6 mm) 3 3
2000T 500-1000 CU/AL 054007-42238 500–1000 kcmil 6.25" (158,7 mm) 1.625" (41,3 mm) 3 3
2000T 750-1000 CU/AL 054007-42243 750–1000 kcmil 6.25" (158,7 mm) 1.625" (41,3 mm) 3 3
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand9.QXD 7/10/2013 8:11 PM Page 208
\ ‘ Tape smemed cam: I ‘NIV: Shie‘ded Cam: umsmela‘mble 5 and 8 kV 175mi| 220 mil 5 and 8 W 175 mil 220 mil Nola: Lavgemumbeved kits may be used m place at smallevnumbered kils mm excess mama‘s \th aver).
PHONE: 800-245-3573 www.3M.com/Electrical 209
15 kV: 3M™ Tape Splice Kits: Single Conductor (1/C)
Scotch® Inline and Tee Tape Shielded
Cable Splice Kits 5700 Series
Scotch® Inline and Tee Tape Shielded Cable Splice Kits 5700 Series handle
inline and tee splices on tape shielded, wire shielded or UniShield® cables
with copper (Cu) or aluminum (Al) conductors. Kits are rated 5 kV-15 kV, and
each kit makes three splices. Use the selector chart to determine the proper kit
needed. Connectors and Lugs need to be ordered separately. 3M does not offer
tee connectors.
Note: Cable sizes shown below are for standard insulation thickness.
Final determining factor is cable insulation O.D.
Voltage: 5 kV, 5/8 kV, 15 kV
Number of Conductors: Single Conductor
Shielding Type: Tape Shield, Wire Shield, UniShield®
Splice Type: Inline, Tee
Technology: Tape
Order No. UPC Case Qty.
5717 054007-12030 1
5718 054007-12048 1
5719 054007-12055 1
5720 054007-12063 1
Medium Voltage Splice Kits, 5 kV–46 kV
Inline Splices Tee Splices*
15 kV 100% 15 kV 133% 15 kV 100% 15 kV 133%
5 and 8 kV 175mil 220 mil 5 and 8 kV 175 mil 220 mil
Product UPC Case
Number (054007-) Cu Al Cu Al Cu Al Cu Al Cu Al Cu Al Qty.
5717 12030 4-250 4-4/0 4-2 4 ———— 1
(22-125) (2-100) (22-30)
5718 12048 300-500 250 1-4/0 4-2/0 2-1/0 4-2/0 4-1/0 ———— 1
(180-250) (150) (50-100) (22-60) (35-60) (22-60) (22-50)
5719 12055 550-1000 300-500 250-500 3/0-250 2/0-350 4-3/0 3/0-350 2/0-4/0 4-1 — — — 1
(300-500) (180-250) (180-250) (95-125) (70-180) (22-80) (95-180) (70-100) (22-38)
5720 12063 500-1000 550-1000 300-750 400-750 4/0-500 400-750 250-500 1/0-350 4-4/0 4-250 4-3/0 1
(300-500) (300-500) (180-325) (240-325) (120-250) (240-325) (125-250) (60-180) (22-100) (22-125) (22-80)
*3M does not offer tee compression connectors.
Note: Larger-numbered kits may be used in place of smaller-numbered kits (with excess materials left over).
Tape Shielded Cable, Wire Shielded Cable, UniShield®Cable
See above for cable type illustrations.
IronwoodPremium_243201_Catalog-On-Demand9.QXD 7/10/2013 8:11 PM Page 209
210 FAX: 800-245-0329
25/28 kV Medium Voltage Splices
The following 3M products cover splicing needs
for applications up to 25/28 kV, and promote
dependable performance, stability and long life
with every splice you make.
Medium Voltage Splice Kits, 5 kV–46 kV
Section Page
25/28 kV...........................................................................................210-221
3M™ Cold Shrink Splice Kits............................................................................................211-215
Single Conductor (1/C) ............................................................................................................................211-213
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splice Kits 5456A, 5457A and 5458A Series ......................................................211-212
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5524A, 5525A and 5526A ...............................................................212-213
Three Conductor (3/C).............................................................................................................................214-215
3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Cable Splice Kits 5786A-MT, 5787A-MT & 5788A-MT.................................214
3M™ Cold Shrink MT-C & MT-E Trifurcating Accessory Kits (One 3/C to Three 1/C) for 25/28 kV.....................................................215
3M™ Molded Rubber Splice Kits......................................................................................216-219
Single Conductor (1/C) ............................................................................................................................216-219
3M™ Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5420 Series ........................................................................................216
3M™ Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5450 Series ........................................................................................217
3M™ Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5451A Series...............................................................................218-219
3M™ Connectors CI and CI-A Series...............................................................................................................................................219
3M™ Molded Rubber Cable Repair Splice Kit 5451R ...............................................................220
Single Conductor (1/C)....................................................................................................................................220
3M™ Molded Rubber QS-II JCN Cable Repair Splice Kits 5451R Series ..........................................................................................220
3M™ Aluminum Repair Connector CIR Series for 3M™ Molded Rubber QS-II JCN Cable Repair Splice Kit 5451R...........................220
3M™ PILC Splice Kits.............................................................................................................221
Single Conductor (1/C)....................................................................................................................................221
3M™ Cold Shrink QS-III 1/C Transition Splice Kits 5520A-1T-PILC Series .......................................................................................221
IronwoodPremium_243201_Catalog-On-Demand9.QXD 7/10/2013 8:11 PM Page 210
Concentric Neutral lCN) Cable -ZL \ Jacketed Concentric Neutral (JEN) Cable
PHONE: 800-245-3573 www.3M.com/Electrical 211
25/28 kV: 3M™ Cold Shrink Splice Kits: Single Conductor (1/C)
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splice Kits 5456A, 5457A and 5458A
Series
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5456A-WG, 5457A-WG and 5458A-WG are inline splices for joining 25/28 kV jacketed concentric
neutral (JCN) or concentric neutral (CN) power cables. It is a cold shrink design. The cold shrink splice body is a one-piece molded design made of specially
formulated silicone rubbers, while the jacketing is made of EPDM rubber for its special physical properties. Each splice is high-voltage production tested to
ensure reliability. Kits can be ordered with connectors packed in the kit or the kit and connector can be ordered as separate items. Meets requirements of
IEEE 404.
Each kit makes one splice.
Note: 5456A-WG, 5457A-WG and 5458A-WG are partially jacketed splices containing built-in bleeder wires. Additional end user materials are required to
convert to full jacketing.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 25/28 kV
Number of Conductors Single Conductor
Shielding Type Concentric Neutral (CN), Jacketed
Concentric Neutral (JCN)
Splice Type Inline
Technology Cold Shrink
Order No. UPC Insulation O.D. Conductor Size Connector Included Case Qty.
5456A 051128-53793 0.84"-1.36" (21,3-34,5 mm) 1 AWG-250 kcmil (50-120 mm²) - 1
5456A-1-AL 051128-53794 0.84"-1.36" (21,3-34,5 mm) 1 AWG 20004 1
5456A-1-CU 051128-53795 0.84"-1.36" (21,3-34,5 mm) 1 AWG 10004 1
5456A-1/0-AL 051128-53796 0.84"-1.36" (21,3-34,5 mm) 1/0 AWG 20005 1
5456A-1/0-CU 051128-53797 0.84"-1.36" (21,3-34,5 mm) 1/0 AWG 10005 1
5456A-2/0-AL 051128-53798 0.84"-1.36" (21,3-34,5 mm) 2/0 AWG 20006 1
5456A-2/0-CU 051128-53799 0.84"-1.36" (21,3-34,5 mm) 2/0 AWG 10006 1
5456A-3/0-AL 051128-53800 0.84"-1.36" (21,3-34,5 mm) 3/0 AWG 20007 1
5456A-3/0-CU 051128-53801 0.84"-1.36" (21,3-34,5 mm) 3/0 AWG 10007 1
5456A-4/0-AL 051128-53802 0.84"-1.36" (21,3-34,5 mm) 4/0 AWG 20008 1
5456A-4/0-CU 051128-53803 0.84"-1.36" (21,3-34,5 mm) 4/0 AWG 10008 1
5456A-250-AL 051128-53935 0.84"-1.36" (21,3-34,5 mm) 250 kcmil 20009 1
5456A-250-CU 051128-53936 0.84"-1.36" (21,3-34,5 mm) 250 kcmil 10009 1
5456A-WG 051128-53804 0.84"-1.36" (21,3-34,5 mm) 1 AWG-250 kcmil (50-120 mm²) - 1
5457A 054007-42149 1.07"-1.70" (27,2-43,2 mm) 250-500 kcmil (120-240 mm²) - 1
5457A-250-AL 051128-53836 1.07"-1.70" (27,2-43,2 mm) 250 kcmil 20009 1
5457A-250-CU 051128-53837 1.07"-1.70" (27,2-43,2 mm) 250 kcmil 10009 1
5457A-350-AL 054007-42132 1.07"-1.70" (27,2-43,2 mm) 350 kcmil 20011 1
5457A-350-CU 054007-44238 1.07"-1.70" (27,2-43,2 mm) 350 kcmil 10011 1
5457A-500-AL 054007-42133 1.07"-1.70" (27,2-43,2 mm) 500 kcmil 20014 1
5457A-500-CU 054007-44239 1.07"-1.70" (27,2-43,2 mm) 500 kcmil 10014 1
5457A-WG 054007-43416 1.07"-1.70" (27,2-43,2 mm) 250-500 kcmil (120-240 mm²) - 1
5458A 054007-42908 1.24"-2.07" (31,5-52,6 mm) 500-1000 kcmil (240-500 mm²) - 1
5458A-500-AL 054007-04593 1.24"-2.07" (31,5-52,6 mm) 500 kcmil 20014 1
5458A-500-CU 054007-04594 1.24"-2.07" (31,5-52,6 mm) 500 kcmil 10014 1
5458A-750-AL 054007-42909 1.24"-2.07" (31,5-52,6 mm) 750 kcmil 20019 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand9.QXD 7/10/2013 8:11 PM Page 211
Tépe Shlelded Cable -.:_ VWe Shielded Cable mshield’Cable Langimdinally Corrugated (LC) Shielded Cable
212 FAX: 800-245-0329
25/28 kV: 3M™ Cold Shrink Splice Kits: Single Conductor (1/C)
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splice Kits 5456A, 5457A and 5458A
Series (continued)
Order No. UPC Insulation O.D. Conductor Size Connector Included Case Qty.
5458A-750-CU 054007-44240 1.24"-2.07" (31,5-52,6 mm) 750 kcmil 10019 1
5458A-1000-AL 054007-42910 1.24"-2.07" (31,5-52,6 mm) 1000 kcmil 20024 1
5458A-1000-CU 054007-44241 1.24"-2.07" (31,5-52,6 mm) 1000 kcmil 10024 1
5458A-WG 054007-43417 1.24"-2.07" (31,5-52,6 mm) 500-1000 kcmil (240-500 mm²) - 1
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5524A, 5525A and 5526A
3M™ Cold Shrink QS-III Inline Shielded Cable Splices 5524A, 5525A and 5526A Series are inline splices for joining 25/28 kV tape shield, wire shield,
UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design. The cold shrink splice body is a one-piece molded design
made of specially formulated silicone rubbers, while the jacketing is made of EPDM rubber for its special physical properties. Each splice is high-voltage
production tested to ensure reliability. Kits can be ordered with connectors packed in the kit, or the kit and connector can be ordered as separate items.
Meets requirements of IEEE 404.
Each kit makes one splice.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 25/28 kV
Number of Conductors Single Conductor
Shielding Type Tape Shield, Wire Shield, UniShield®,
Longitudinally Corrugated (LC)
Splice Type Inline
Technology Cold Shrink
Order No. UPC Insulation O.D. Conductor Size Connector Included Case Qty.
5524A 051128-53922 0.84"-1.36" (21,3–34,5 mm) 1 AWG-250 kcmil (50–120 mm²) - 1
5524A-1-AL 051128-53923 0.84"-1.36" (21,3-34,5 mm) 1 AWG 20004 1
5524A-1-CU 051128-53924 0.84"-1.36" (21,3-34,5 mm) 1 AWG 10004 1
5524A-1/0-AL 051128-53925 0.84"-1.36" (21,3-34,5 mm) 1/0 AWG 20005 1
5524A-1/0-CU 051128-53926 0.84"-1.36" (21,3-34,5 mm) 1/0 AWG 10005 1
5524A-2/0-AL 051128-53927 0.84"-1.36" (21,3-34,5 mm) 2/0 AWG 20006 1
5524A-2/0-CU 051128-53928 0.84"-1.36" (21,3-34,5 mm) 2/0 AWG 10006 1
5524A-3/0-AL 051128-53929 0.84"-1.36" (21,3-34,5 mm) 3/0 AWG 20007 1
5524A-3/0-CU 051128-53930 0.84"-1.36" (21,3-34,5 mm) 3/0 AWG 10007 1
5524A-4/0-AL 051128-53931 0.84"-1.36" (21,3-34,5 mm) 4/0 AWG 20008 1
5524A-4/0-CU 051128-53932 0.84"-1.36" (21,3-34,5 mm) 4/0 AWG 10008 1
5524A-250-AL 051128-53933 0.84"-1.36" (21,3-34,5 mm) 250 kcmil 20009 1
5524A-250-CU 051128-53934 0.84"-1.36" (21,3-34,5 mm) 250 kcmil 10009 1
5525A 054007-42138 1.07"-1.70" (27,2-43,2 mm) 250-750 kcmil (120-325 mm²) - 1
5525A-250-AL 051128-53845 1.07"-1.70" (27,2-43,2 mm) 250 kcmil 20009 1
5525A-250-CU 051128-53846 1.07"-1.70" (27,2-43,2 mm) 250 kcmil 10009 1
5525A-350-AL 054007-42140 1.07"-1.70" (27,2-43,2 mm) 350 kcmil 20011 1
5525A-350-CU 054007-42902 1.07"-1.70" (27,2-43,2 mm) 350 kcmil 10011 1
5525A-500-AL 054007-42141 1.07"-1.70" (27,2-43,2 mm) 500 kcmil 20014 1
5525A-500-CU 054007-42903 1.07"-1.70" (27,2-43,2 mm) 500 kcmil 10014 1
5525A-750-AL 054007-42904 1.07"-1.70" (27,2-43,2 mm) 750 kcmil 20019 1
5525A-750-CU 054007-42127 1.07"-1.70" (27,2-43,2 mm) 750 kcmil 10019 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand9.QXD 7/10/2013 8:11 PM Page 212
PHONE: 800-245-3573 www.3M.com/Electrical 213
25/28 kV: 3M™ Cold Shrink Splice Kits: Single Conductor (1/C)
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5524A, 5525A and 5526A
(continued)
Order No. UPC Insulation O.D. Conductor Size Connector Included Case Qty.
5526A 054007-42905 1.24"-2.07" (31,5-52,6 mm) 500-1000 kcmil (240-500 mm²) - 1
5526A-500-AL 054007-04597 1.24"-2.07" (31,5-52,6 mm) 500 kcmil 20014 1
5526A-500-CU 054007-04598 1.24"-2.07" (31,5-52,6 mm) 500 kcmil 10014 1
5526A-750-AL 054007-04595 1.24"-2.07" (31,5-52,6 mm) 750 kcmil 20019 1
5526A-750-CU 054007-04596 1.24"-2.07" (31,5-52,6 mm) 750 kcmil 10019 1
5526A-1000-AL 054007-42906 1.24"-2.07" (31,5-52,6 mm) 1000 kcmil 20024 1
5526A-1000-CU 054007-42907 1.24"-2.07" (31,5-52,6 mm) 1000 kcmil 10024 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand9.QXD 7/10/2013 8:11 PM Page 213
Three-Ccnduclor Non-Armored, Shielded Cable
214 FAX: 800-245-0329
25/28 kV: 3M™ Cold Shrink Splice Kits: Three Conductor (3/C)
3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Cable Splice Kits 5786A-MT,
5787A-MT & 5788A-MT
3M™ Cold Shrink QS-III 3/C Inline Armored or Non-Armored Cable Splices 5786A-MT, 5787A-MT and 5788A-MT are designed for splicing 3-conductor,
armored and non-armored, shielded power cables. The kits are rated for use on 25/28 kV cables with conductor sizes from 1 AWG-1000 kcmil (50-500
mm²). The kits are designed to be used with 3M™ Scotchlok™ Connectors 10000 and 20000 Series or other UL listed inline compression connectors that
fit within the dimension limits listed in the connector dimensional requirements on the data sheet.
The splice utilizes several technologies to accommodate the various functions of a 3/C shielded power cable: 3M™ Cold Shrink QS-III Splice Bodies,
Scotch® Tapes for moisture sealing, Constant Force Springs for connecting ground braid jumpers and Sheath Wrap for replacing the cable armor and/or
jacket. The completed splice is designed for use in cable trays, weather exposed or direct burial locations. Meets the requirements of IEEE 404.
Connectors are not included in the kit and must be ordered separately.
Note: When making a trifurcating splice, the 3M™ Cold Shrink MT-C or MT-E Trifurcating Accessory Kit must be used along with the splice kit.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 25/28 kV
Number of Conductors Three Conductor
Shielding Type Shielded Armored or Non-Armored
Splice Type Inline, Trifurcating
Technology Cold Shrink
Order No. UPC Conductor Size Insulation O.D. Connector O.D. Typical Splice
Length Suggested Accessory Case
Qty.
5786A-MT 051128-53937 1 AWG-250 kcmil
(50-120 mm²)
0.84"-1.36"
(21,3-34,5 mm)
0.46"-1.36"
(11,7-34,5 mm)
57"
(1447,8 mm)
3M™ Trifurcating Accessory for 3-C to
3 Single Conductors MT-C;
3M™ Trifurcating Accessory for 3-C to
3 Single Conductors MT-E
1
5787A-MT 054007-43421 250-750 kcmil
(120-325 mm²)
1.07"-1.70"
(27,2-43,2 mm)
0.75"-1.70"
(19,1-43,2 mm)
62"
(1574,8 mm)
3M™ Trifurcating Accessory for 3-C to
3 Single Conductors MT-E
1
5788A-MT 054007-43422 500-1000 kcmil
(240-500 mm²)
1.24"-2.07"
(31,5-52,6 mm)
1.05"-2.07"
(26,7-52,6 mm)
66"
(1676,4 mm)
3M™ Trifurcating Accessory for 3-C to
3 Single Conductors MT-E
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 8:05 PM Page 214
Selection Table WWIMSTXXA-MT mwmmmi) Wmm'lrzfiinnlfll Typxcal Conduclor Size Range 7 AWG/kcmxl‘ SHEA-MT 1- 2/0 MT-C 5786A-MT SID-250 MT-E 5787A7MT 2507500 MTVE 5788A7MT 500 MTVE —
PHONE: 800-245-3573 www.3M.com/Electrical 215
25/28 kV: 3M™ Cold Shrink Splice Kits: Three Conductor (3/C)
3M™ Cold Shrink MT-C & MT-E
Trifurcating Accessory Kits (One 3/C to
Three 1/C) for 25/28 kV
3M™ Cold Shrink MT-C and MT-E Trifurcating Accessory Kits are used to
break out and seal a transition from 3/C to three 1/C.
For use with 3M™ Cold Shrink QS-III Splicing Series 5700A-MT.
Voltage: 25/28 kV
Number of Conductors: One 3/C to three 1/C
Order No. UPC Single Conductor Jacket O.D. Kits per Case
MT-C 051128-55208 0.62"-1.13" (15,7-28,7 mm) 1
MT-E 051128-54318 1.13"-1.80" (28,7-45,7 mm) 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 8:05 PM Page 215
m r ‘- a Conc/entric Neutral (CN) Cable Jacketed Concentric Neutral (JCN) Cable
216 FAX: 800-245-0329
25/28 kV: 3M™ Molded Rubber Splice Kits: Single Conductor (1/C)
3M™ Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5420 Series
3M™ Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5420 Series are inline splices designed for use on 25 kV CN or JCN cable. The continuous
current rating of each splice is equal to the current rating of the cable it is sized to accommodate. Meets requirements of IEEE 404 for cable joints.
Each kit makes one splice. Connectors, unless specified, are not included in the kit, and must be ordered separately.
Note: If connector is desired packed with any of the kits shown above, add the connector number after the splice number (example: 5420-CI-22A).
Jacketing kit is needed for JCN cable.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 25/28 kV
Number of Conductors Single Conductor
Shielding Type Concentric Neutral (CN), Jacketed
Concentric Neutral (JCN)
Splice Type Inline
Technology Molded Rubber
Order No. UPC Insulation O.D. Conductor Size Connector Included Case Qty.
5420 054007-15819 0.795"-0.940" (20,2-23,9 mm) 2-1/0 AWG (35-50 mm²) - 1
5420-CI-22A 054007-15820 0.795"-0.940" (20,2-23,9 mm) 2 AWG Solid CI-22A 1
5421 054007-15827 0.920"-1.080" (23,4-27,4 mm) 1/0-3/0 AWG (60-80 mm²) - 1
5422 054007-15835 1.060"-1.210" (26,9-30,7 mm) 3/0-4/0 AWG (95-100 mm²) - 1
5423 054007-15843 1.120"-1.320" (28,4-33,5 mm) 250-350 kcmil (125-180 mm²) - 1
5423-CI-350 054007-08384 1.120"-1.320" (28,4-33,5 mm) 350 kcmil CI-350 1
5424 054007-15850 1.320"-1.520" (33,5-38,6 mm) 500 kcmil - 1
5425 054007-09240 1.390"-1.590" (35,0-40,0 mm) 750 kcmil compact 1
5426 054007-09239 1.550"-1.710" (39,4-43,4 mm) 750 kcmil - 1
5426-CI-750 054007-09177 1.550"-1.710" (39,4-43,4 mm) 750 kcmil CI-750 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 8:05 PM Page 216
PHONE: 800-245-3573 www.3M.com/Electrical 217
25/28 kV: 3M™ Molded Rubber Splice Kits: Single Conductor (1/C)
3M™ Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5450 Series
The 3M™ Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5450 Series kits are one-piece inline splices designed for use on 25/28 kV CN and JCN
cable. Meets requirements of IEEE 404 for cable joints.
Each kit makes one splice. Connectors, unless specified, are not included in the kit, and must be ordered separately.
Use the primary insulation O.D. range for final conductor size ordering criteria. If connector is desired packed with any of the kits shown above, add the
connector number after the splice number (example: 5451-CI-1/0A). Jacketing kit is needed for JCN cable.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 25/28 kV
Number of Conductors Single Conductor
Shielding Type Concentric Neutral (CN), Jacketed
Concentric Neutral (JCN)
Splice Type Inline
Technology Molded Rubber
Order No. UPC Insulation O.D. Range Conductor Size Connector Included Case Qty.
5451 054007-09127 0.83"-1.04" (21,1-26,4 mm) 2-2/0 AWG (60 mm²) - 1
5451-CI-2A 054007-09152 0.83"-1.04" (21,1-26,4 mm) 2 AWG (33 mm²) CI-2A 1
5451-CI-1A 054007-09935 0.83"-1.04" (21,1-26,4 mm) 1 AWG (42 mm²) CI-1A 1
5451-CI-21-840 054007-09154 0.83"-1.04" (21,1-26,4 mm) 2-1 AWG (33-42 mm²) CI-21-840 1
5451-CI-1/0A 054007-09153 0.83"-1.04" (21,1-26,4 mm) 1/0 AWG (53 mm²) CI-1/0A 1
5451-CI-1/0-840 054007-09155 0.83"-1.04" (21,1-26,4 mm) 1/0 AWG (53 mm²) CI-1/0-840 1
5452 054007-09128 1.00"-1.15" (25,4-29,2 mm) 3/0-4/0 AWG (95 mm²) - 1
Medium Voltage Splice Kits, 5 kV–46 kV
Concentric Neutral (CN) Cable
Jacketed Concentric Neutral (JCN) Cable
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 8:05 PM Page 217
7‘" 1% (cm Cable \ / (4cm Cabln 7 7 Vimém Sphoe mm 3Mw Cable Splice 5451A Series Selection—For Thick Wall (Insulation) Cable Concelmic Neutral [Cm Cabla Jackemu Cmoemnc NEWa‘ [JUN] Cab‘e ZAWG 1ch 295 ms 131—2101131419“: 1 1 AWE I/DAWG 290 ms 01-1on 01-21-900 1 H 295 ms 5451A 49527 £333; 9151:1111 1/0 AWG 7 260 mus Cl-l/OA ov 01-1/0-940 1 ' ' 290 mxls 295 "HIS 2m AWG 7 260 ms 01-20 1 290 ms 0905-1055” 230 ml: 5451A-CHA 4952; 123104613 mm 1 we we AWG 295 ms 01-111 1 u 260 ms 545111011 m 49530 ”“4055 1m AWG 7 290 ms 011/09 1 1234172615 mm 295 ms 0.9054055” 545110121940 49532 1239263 mm 2 an AWG 1 or 1/0 awe 295 Imls 017217940 1 1 260 ms 5451A-Cl-1/0-840 19529 £50521; grin“ 1m AWG 7 290 ms CHM-MD 1 ' ' 235 ml: 0 905-1 055“ 260 ms 5451A-CI-2/o 49531 12313-269 mm 2/0 AWG 7 260 ms 01-2/0 1
218 FAX: 800-245-0329
25/28 kV: 3M™ Molded Rubber Splice Kits: Single Conductor (1/C)
3M™ Molded Rubber QS-II Inline CN/JCN
Cable Splice Kits 5451A Series
The 3M™ Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5451A Series
is a 25/28 kV class inline splice designed for joining concentric neutral (CN)
and jacketed concentric neutral (JCN) distribution class power cables. The
splice is a one-piece molded design made of specially formulated, peroxide
cured EPDM rubbers. Each splice is production tested on CN cable to ensure
reliability. The splice is designed for use with special CI-series Inline Compression Connectors for connecting either aluminum or copper conductors. The
5451A Quick Splice II splice meets the 25 kV voltage rating requirements of IEEE 404.
Each kit makes one splice. Jacketing kit is needed for JCN cable. Connectors, unless specfied, are not included in the kit, and must be ordered separately.
Refer to the index to find CI, CI-840 and CI-A series connectors.
Note: CI-A series connectors are sized for 5/8 crimping die; CI-2/0 and CI-840 series connectors are sized for 840 crimping die.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage: 25/28 kV
Number of Conductors: Single Conductor
Shielding Type: Concentric Neutral (CN), Jacketed Concentric Neutral (JCN)
Splice Type: Inline
Technology: Molded Rubber
Order No. UPC Case Qty.
5451A 054007-49527 1
5451A-CI-1A 054007-49529 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 8:05 PM Page 218
PHONE: 800-245-3573 www.3M.com/Electrical 219
25/28 kV: 3M™ Molded Rubber Splice Kits: Single Conductor (1/C)
3M™ Molded Rubber QS-II Inline CN/JCN Cable Splice Kits 5451A Series (continued)
Order No. UPC Case Qty.
5451A-CI-1/0A 054007-49530 1
5451A-CI-21-840 054007-49532 1
5451A-CI-1/0-840 054007-49528 1
5451A-CI-2/0 054007-49531 1
3M™ Connectors CI and CI-A Series
Meets the requirements of ANSI C119.4
Order No. UPC Conductor Size Connector O.D. Connectors per Case
CI-22A 054007-15868 2 AWG Solid 0.910" (23 mm) 10
CI-2A 054007-00721 2 AWG Stranded, 1 AWG Solid 0.910" (23 mm) 10
CI-1A 054007-00722 2-1 AWG Stranded, 1-1/0 AWG Solid 0.910" (23 mm) 10
CI-21-840 054007-09136 2-1 AWG Stranded, 1-1/0 AWG Solid 0.910" (23 mm) 10
CI-1/0A 054007-14176 1/0 AWG Stranded 0.910" (23 mm) 10
CI-1/0-840 054007-09137 1/0 AWG Stranded 0.910" (23 mm) 10
CI-2/0 054007-11875 2/0 AWG Stranded 0.910" (23 mm) 10
CI-3/0 054007-11883 3/0 AWG Stranded 0.910" (23 mm) 10
CI-4/0 054007-11891 4/0 AWG Stranded 0.910" (23 mm) 10
CI-250 054007-11909 250 kcmil Stranded 1.125" (29 mm) 10
CI-350 054007-11925 350 kcmil Stranded 1.125" (29 mm) 10
CI-450 054007-11933 500 kcmil Compact 1.312" (33 mm) 10
CI-500 054007-25644 500 kcmil Stranded 1.312" (33 mm) 10
CI-650 054007-11941 750 kcmil Compact 1.590" (43 mm) 10
CI-750 054007-25651 750 kcmil Stranded 1.590" (43 mm) 10
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand.QXD 7/10/2013 8:05 PM Page 219
ConEentric Neutral (CN) Cable ‘ —r ‘ % Jacketed Co’ncenrtrlc Neutral (JCN) Cable um—
220 FAX: 800-245-0329
25/28 kV: 3M™ Molded Rubber Cable Repair Splice Kit 5451R: Single Conductor (1/C)
3M™ Molded Rubber QS-II JCN Cable Repair Splice Kits 5451R Series
The 3M™ Molded Rubber QS-II JCN Cable Repair Splice Kit 5451R Series is a 25/28 kV class inline splice designed to serve as a cable repair for concentric
neutral (CN) and jacketed concentric neutral (JCN) distribution class power cables. It is designed to replace up to 6" (15,24 cm) of damaged cable, thus
virtually eliminating the need to splice in a new section of cable with two separate splices.
The splice is a one-piece molded design made of specially formulated, peroxide cured EPDM rubbers. Each splice is production tested on CN cable to
ensure reliability. The splice is designed for use with the special 3M™ CIR–Series Inline Compression Connector provided, for connecting either aluminum
or copper conductors. The 3M™ Molded Rubber QS-II Splice meets the 25 kV voltage rating requirements of IEEE 404. Jacketing kit is needed for JCN
Cable.
Note: 3M™ Repair Connector CIR-A series connectors are sized for 5/8 crimping die; 3M™ Repair Connector CIR-840 series connectors are sized for 840
crimping die.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 25/28 kV
Number of Conductors Single Conductor
Shielding Type Concentric Neutral (CN), Jacketed
Concentric Neutral (JCN)
Splice Type Inline Repair
Technology Molded Rubber
Order No. UPC Insulation O.D. Range Conductor Size, Stranded Conductor Size, Solid Connector Included Case Qty.
5451R-CIR-21A 054007-49479 0.870"-1.055" (22,1-26,8 mm) 2-1 AWG 1-1/0 AWG CIR-21A 1
5451R-CIR-21-840 054007-49478 0.870"-1.055" (22,1-26,8 mm) 2-1 AWG 1-1/0 AWG CIR-21-840 1
5451R-CIR-1/0A 054007-49476 0.870"-1.055" (22,1-26,8 mm) 1/0 AWG - CIR-1/0A 1
5451R-CIR-1/0-840 054007-49477 0.870"-1.055" (22,1-26,8 mm) 1/0 AWG - CIR-1/0-840 1
3M™ Aluminum Repair Connector CIR Series for 3M™ Molded Rubber QS-II JCN
Cable Repair Splice Kit 5451R
3M™ Aluminum Repair Connector CIR Series are extra long connectors which are used to bridge gaps up to 6" (15,24 cm) when a piece of damaged cable
is removed. They can be used with copper or aluminum conductors.
3M™ CIR Series Repair Connectors are specially designed for use with 3M™ Cable Repair Splice Kits. They are aluminum connectors for use on aluminum
or copper cable conductors. When used with the appropriate splice kit, these connectors allow up to 6" (15,24 cm) of damaged cable conductor to be
removed, virtually eliminating the need to splice in a new section of cable. CIR series connectors meet the requirements of ANSI C119.4.
Connector Base Metal Aluminum
For use with Aluminum or Copper Conductor
Order No. UPC Conductor Size, Stranded Conductor Size, Solid Length Outside Diameter (O.D.) Case Qty.
CIR-1/0-840 054007-09137 1/0 AWG - 9.0" (228,6 mm) 0.91" (23,1 mm) 10
CIR-1/0A 054007-50226 1/0 AWG - 9.0" (228,6 mm) 0.91" (23,1 mm) 10
CIR-21-840 054007-09136 2-1/0 AWG 1-1/0 AWG 9.0" (228,6 mm) 0.91" (23,1 mm) 10
CIR-21A 054007-50227 2-1 AWG 1-1/0 AWG 9.0" (228,6 mm) 0.91" (23,1 mm) 10
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand11.QXD 7/10/2013 8:11 PM Page 220
.Cl u: -. I- . - - H mnmwmwtwwzummsm- mm» My mum um mm mm;
PHONE: 800-245-3573 www.3M.com/Electrical 221
25/28 kV: 3M™ PILC Splice Kits: Single Conductor (1/C)
3M™ Cold Shrink QS-III 1/C Transition Splice Kits 5520A-1T-PILC Series
3M™ Cold Shrink QS-III 1/C Transition Splice Kits, 5520A-1T-PILC Series (which includes 5524A-1T-PILC, 5525A-1T-PILC, and 5526A-1T-PILC) are 25/28
kV class inline splices designed to transition single-conductor PILC to Poly/EPR cable and meet the 25 kV voltage class rating requirements of IEEE 404.
The splice kits include an oil barrier system based on a cold shrink tube design of specially formulated, oil-resistant polymer, and laboratory tested to
nominal internal pressures of 40 psi with no oil leakage. The splice body itself is a one-piece molded design made of specially formulated silicone rubber. An
EPDM rubber foldback cold shrink jacket is included for physical protection and environmental sealing.
Each kit contains sufficient material to make one splice. Connector is not provided with the kits due to customer specific application requirements. To
ensure a positive oil stop, a non-tapered, sealed connector (with a solid center barrier) should be used.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 25/28 kV
Number of Conductors Single Conductor
Shielding Type Paper Insulated Lead Covered (PILC)
Splice Type Inline PILC Transition
Technology Cold Shrink
Order No. UPC
051128-
Max. O.D. Over Lead
Sheath
PILC Cable Insul.
O.D.
Poly/EPR Cable
Insul. O.D.
PILC Cable Conductor
Size 100%
PILC Cable
Conductor
Size 133%
Poly/EPR
Cable
Conductor
Size
Case
Qty.
5524A-IT-PILC -57198 1.35"
(34 mm)
0.87"-1.16"
(22,1-29,5 mm)
0.84"-1.32"
(21,3-33,5 mm)
1 AWG-250 kcmil
(50-120 mm²)
1-2/0 AWG
(50-60 mm²)
1 AWG-250
kcmil
(50-120 mm²)
1
5525A-1T-PILC -57199 1.79"
(45 mm)
1.14"-1.57"
(29,0-39,9 mm)
1.07"-1.70"
(27,2-43,2 mm)
300-650 kcmil
(150-325 mm²)
250-500 kcmil
(120-240 mm²)
250-750
kcmil
(120-325
mm²)
1
5526A-1T-PILC -57200 2.14"
(54 mm)
1.49"-1.91"
(37,8-48,5 mm)
1.24"-2.07"
(31,5-52,6 mm)
700-1000 kcmil
(400-500 mm²)
550-1000
kcmil
(300-500 mm²)
550-1000
kcmil
(300-500
mm²)
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand11.QXD 7/10/2013 8:11 PM Page 221
222 FAX: 800-245-0329
35 kV Medium Voltage Splices
The following 3M products cover splicing needs
for applications up to 35 kV, and promote
dependable performance, stability and long life
with every splice you make.
Medium Voltage Splice Kits, 5 kV–46 kV
Section Page
35 kV................................................................................................222-230
3M™ Cold Shrink Splice Kits............................................................................................223-227
Single Conductor (1/C) ............................................................................................................................223-225
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splice Kits 5467A and 5468A Series .........................................................................223
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5535A and 5536A...................................................................................224
3M™ Cold Shrink QS-III CN/JCN Cable Shield-Break Splice Kits 5467A-XB and 5468A-XB .............................................................225
Three Conductor (3/C).............................................................................................................................226-227
3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Splice Kits 5797A-MT and 5798A-MT.........................................................226
3M™ Cold Shrink MT-E Trifurcating Accessory Kit (One 3/C to Three 1/C) for 35 kV ........................................................................227
3M™ Molded Rubber Splice Kits......................................................................................228-229
Single Conductor (1/C) ............................................................................................................................228-229
3M™ Molded Rubber QS CN/JCN Cable Splice Kits 5432 and 5433................................................................................................228
3M™ Molded Rubber QS-II CN/JCN Cable Splice Kits 5461 ............................................................................................................229
3M™ Connectors CI-A and CI-840 Series for 3M™ Molded Rubber QS Cable Splice Kits 5432 and 5461 Series ............................229
3M™ PILC Splice Kits..............................................................................................................230
Single Conductor (1/C)....................................................................................................................................230
3M™ Cold Shrink QS-III 1/C Transition Splice Kits 5530A-1T-PILC Series .......................................................................................230
IronwoodPremium_243201_Catalog-On-Demand11.QXD 7/10/2013 8:11 PM Page 222
Concentric Neutral lCN) Cable .2 \ Jacketed Concentric Neutral (JEN) Cable
PHONE: 800-245-3573 www.3M.com/Electrical 223
35 kV: 3M™ Cold Shrink Splice Kits: Single Conductor (1/C)
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splice Kits 5467A and 5468A Series
3M™ Cold Shrink QS-III Inline CN/JCN Cable Splices 5467A, 5467A-WG, 5468A and 5468A-WG are inline splices for joining 35 kV jacketed concentric
neutral (JCN) or concentric neutral (CN) power cables. It is a cold shrink design. The cold shrink splice body is a one-piece molded design made of specially
formulated silicone rubbers, while the jacketing is made of EPDM rubber for its special physical properties. Each splice is high-voltage production tested to
ensure reliability.
The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions
within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 250 kV (equal to a 46 kV voltage
class). The 3M™ Cold Shrink QS-III Splices 5467A, 5467A-WG, 5468A and 5468A-WG meet or exceed the 35 kV Voltage Class rating requirements of IEEE
404.
Kits can be ordered with connectors packed in the kit, or the kit and connector can be ordered as separate items. Each kit makes one splice.
Note: 5467A-WG and 5468A-WG are partially jacketed splices containing built-in bleeder wires. Additional end user materials are required to convert to full
jacketing.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 35 kV
Number of Conductors Single Conductor
Shielding Type Concentric Neutral (CN), Jacketed
Concentric Neutral (JCN)
Splice Type Inline
Technology Cold Shrink
Order No. UPC Insulation O.D. Range Conductor Size Connector Included Case Qty.
5467A 054007-43051 1.07"-1.70" (27,2-43,2 mm) 1/0 AWG-350 kcmil (60-185 mm²) - 1
5467A-1/0-AL 054007-43052 1.07"-1.70" (27,2-43,2 mm) 1/0 AWG 20005 1
5467A-1/0-CU 054007-43057 1.07"-1.70" (27,2-43,2 mm) 1/0 AWG 10005 1
5467A-2/0-AL 054007-43053 1.07"-1.70" (27,2-43,2 mm) 2/0 AWG 20006 1
5467A-2/0-CU 054007-43058 1.07"-1.70" (27,2-43,2 mm) 2/0 AWG 10006 1
5467A-3/0-AL 054007-43054 1.07"-1.70" (27,2-43,2 mm) 3/0 AWG 20007 1
5467A-3/0-CU 054007-43059 1.07"-1.70" (27,2-43,2 mm) 3/0 AWG 10007 1
5467A-4/0-AL 054007-43055 1.07"-1.70" (27,2-43,2 mm) 4/0 AWG 20008 1
5467A-4/0-CU 054007-43060 1.07"-1.70" (27,2-43,2 mm) 4/0 AWG 10008 1
5467A-250-AL 054007-43056 1.07"-1.70" (27,2-43,2 mm) 250 kcmil 20009 1
5467A-250-CU 054007-43061 1.07"-1.70" (27,2-43,2 mm) 250 kcmil 10009 1
5467A-350-AL 054007-04589 1.07"-1.70" (27,2-43,2 mm) 350 kcmil 20011 1
5467A-350-CU 054007-04590 1.07"-1.70" (27,2-43,2 mm) 350 kcmil 10011 1
5467A-WG 051128-53883 1.07"-1.70" (27,2-43,2 mm) 1/0 AWG-350 kcmil (60-185 mm²) - 1
5468A 054007-43062 1.24"-2.07" (31,5-52,6 mm) 350-1000 kcmil (185-500 mm²) - 1
5468A-350-AL 054007-43063 1.24"-2.07" (31,5-52,6 mm) 350 kcmil 20011 1
5468A-350-CU 054007-43067 1.24"-2.07" (31,5-52,6 mm) 350 kcmil 10011 1
5468A-500-AL 054007-43064 1.24"-2.07" (31,5-52,6 mm) 500 kcmil 20014 1
5468A-500-CU 054007-43068 1.24"-2.07" (31,5-52,6 mm) 500 kcmil 10014 1
5468A-750-AL 054007-43065 1.24"-2.07" (31,5-52,6 mm) 750 kcmil 20019 1
5468A-750-CU 054007-43069 1.24"-2.07" (31,5-52,6 mm) 750 kcmil 10019 1
5468A-1000-AL 054007-43066 1.24"-2.07" (31,5-52,6 mm) 1000 kcmil 20024 1
5468A-1000-CU 054007-43070 1.24"-2.07" (31,5-52,6 mm) 1000 kcmil 10024 1
5468A-WG 051128-53909 1.24"-2.07" (31,5-52,6 mm) 350-1000 kcmil (185-500 mm²) - 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand11.QXD 7/10/2013 8:11 PM Page 223
\ _ ‘ x Tape Shlelded Cable -.,:_ VWe Shielded Cab‘e UniShie‘d’Cable Langimdinany Corrugated (LC) Shielded Cable
224 FAX: 800-245-0329
35 kV: 3M™ Cold Shrink Splice Kits: Single Conductor (1/C)
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5535A and 5536A
3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5535A and 5536A Series are inline splices for joining 35 kV tape shield, wire shield, UniShield® or
longitudinally corrugated (LC) shielded power cables. The cold shrink splice body is a one-piece molded design made of specially formulated silicone
rubbers, while the jacketing is made of EPDM rubber for its special physical properties. Each splice is high-voltage production tested to ensure reliability.
The splices can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions
within the listed kit size range. They are designed to exceed minimum industry test standards, and have a BIL rating of 250 kV (equal to a 46 kV voltage
class). The 3M™ Cold Shrink QS-III Splices 5535A and 5536A meet or exceed the 35 kV Voltage Class rating requirements of IEEE 404.
Kits can be ordered with connectors packed in the kit, or the kit and connector can be ordered as separate items. Each kit makes one splice.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 35 kV
Number of Conductors Single Conductor
Shielding Type Tape Shield, Wire Shield, UniShield®,
Longitudinally Corrugated (LC)
Splice Type Inline
Technology Cold Shrink
Order No. UPC Insulation O.D. Range Conductor Size Connector Included Case Qty.
5535A 054007-43071 1.07"-1.70" (27,2-43,2 mm) 1/0 AWG-350 kcmil (60-185 mm²) - 1
5535A-1/0-AL 054007-43072 1.07"-1.70" (27,2-43,2 mm) 1/0 AWG 20005 1
5535A-1/0-CU 054007-43077 1.07"-1.70" (27,2-43,2 mm) 1/0 AWG 10005 1
5535A-2/0-AL 054007-43073 1.07"-1.70" (27,2-43,2 mm) 2/0 AWG 20006 1
5535A-2/0-CU 054007-43078 1.07"-1.70" (27,2-43,2 mm) 2/0 AWG 10006 1
5535A-3/0-AL 054007-43074 1.07"-1.70" (27,2-43,2 mm) 3/0 AWG 20007 1
5535A-3/0-CU 054007-43079 1.07"-1.70" (27,2-43,2 mm) 3/0 AWG 10007 1
5535A-4/0-AL 054007-43075 1.07"-1.70" (27,2-43,2 mm) 4/0 AWG 20008 1
5535A-4/0-CU 054007-43080 1.07"-1.70" (27,2-43,2 mm) 4/0 AWG 10008 1
5535A-250-AL 054007-43076 1.07"-1.70" (27,2-43,2 mm) 250 kcmil 20009 1
5535A-250-CU 054007-43081 1.07"-1.70" (27,2-43,2 mm) 250 kcmil 10009 1
5535A-350-AL 054007-04591 1.07"-1.70" (27,2-43,2 mm) 350 kcmil 20011 1
5535A-350-CU 054007-04592 1.07"-1.70" (27,2-43,2 mm) 350 kcmil 10011 1
5536A 054007-43082 1.24"-2.07" (31,5-52,6 mm) 350-1000 kcmil (185-500 mm²) - 1
5536A-350-AL 054007-43083 1.24"-2.07" (31,5-52,6 mm) 350 kcmil 20011 1
5536A-350-CU 054007-43087 1.24"-2.07" (31,5-52,6 mm) 350 kcmil 10011 1
5536A-500-AL 054007-43084 1.24"-2.07" (31,5-52,6 mm) 500 kcmil 20014 1
5536A-500-CU 054007-43088 1.24"-2.07" (31,5-52,6 mm) 500 kcmil 10014 1
5536A-750-AL 054007-43085 1.24"-2.07" (31,5-52,6 mm) 750 kcmil 20019 1
5536A-750-CU 054007-43089 1.24"-2.07" (31,5-52,6 mm) 750 kcmil 10019 1
5536A-1000-AL 054007-43086 1.24"-2.07" (31,5-52,6 mm) 1000 kcmil 20024 1
5536A-1000-CU 054007-43090 1.24"-2.07" (31,5-52,6 mm) 1000 kcmil 10024 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand11.QXD 7/10/2013 8:11 PM Page 224
PHONE: 800-245-3573 www.3M.com/Electrical 225
35 kV: 3M™ Cold Shrink Splice Kits: Single Conductor (1/C)
3M™ Cold Shrink QS-III CN/JCN Cable Shield-Break Splice Kits 5467A-XB and
5468A-XB
3M™ Cold Shrink QS-III Shield-Break Splice Kits 5467A-XB and 5468A-XB Series are inline splices designed for providing a shield-break in the joining of
35 kV jacketed concentric neutral (JCN) or concentric neutral (CN) power cables. It is a cold shrink design sized to fit Type MV-90 or type MV-105 cables
with copper or aluminum conductor sizes ranging from 1/0-1000 kcmil (185-500 mm²). The shield-break allows the splice to be used for shield-break and
cross-bounding installations. Each splice is high-voltage production tested to ensure reliability. Meets the requirements of IEEE 404.
Each kit makes one shield-break splice.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 35 kV
Number of Conductors Single Conductor
Shielding Type Concentric Neutral (CN), Jacketed
Concentric Neutral (JCN)
Splice Type Inline Cross-Bond
Technology Cold Shrink
Order No. UPC Insulation O.D. Range Conductor Size Typical Splice Length Case Qty.
5467A-XB 051128-54939 1.07"-1.70" (27,2-43,2 mm) 1/0 AWG-350 kcmil (60-185 mm²) 62.0" (1574,8 mm) 1
5468A-XB 051128-54940 1.24"-2.07" (31,5-52,6 mm) 350-1000 kcmil (185-500 mm²) 66.0" (1676,4 mm) 1
Medium Voltage Splice Kits, 5 kV–46 kV
Jacketed Concentric Neutral (JCN) Cable
IronwoodPremium_243201_Catalog-On-Demand11.QXD 7/10/2013 8:11 PM Page 225
Three-Ccnduclor Non-Armored, Shielded Cable
226 FAX: 800-245-0329
35 kV: 3M™ Cold Shrink Splice Kits: Three Conductor (3/C)
3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Splice Kits 5797A-MT and
5798A-MT
The 3M™ Cold Shrink QS-III 3/C Armored or Non-Armored Splice Kits 5797A-MT and 5798A-MT Series are designed for splicing 3/C, armored and non-
armored, shielded power cables. The kits are rated for use on 35 kV cables with conductor sizes from 1/0 AWG-1000 kcmil (60-500 mm²). The kits are
designed to be used with 3M™ Scotchlok™ Connectors 10000 and 20000 Series or other UL listed inline compression connectors that fit within the
dimension limits listed in the Connector Dimensional Requirements Table on the data sheet.
The splice utilizes several technologies to accommodate the various functions of a 3/C shielded power cable: 3M™ Cold Shrink QS-III Splice Bodies,
Scotch® Tapes for moisture sealing, Constant Force Springs for connecting ground braid jumpers and Sheath Wrap for replacing the cable armor and/or
jacket. The completed splice is designed for use in cable trays, weather exposed or direct burial locations. Meets the requirements of IEEE 404.
Connectors are not included in the kit and must be ordered separately.
Note: When making a trifurcating splice, the 3M™ Cold Shrink MT-E Trifurcating Accessory Kit must be used along with the splice kit.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 35 kV
Number of Conductors Three Conductor
Shielding Type Shielded Armored or Non-Armored
Splice Type Inline, Trifurcating
Technology Cold Shrink
Order No. UPC Insulation O.D. Range Conductor Size Suggested Accessory Case
Qty.
5797A-MT 054007-43419 1.07"-1.70"
(27,2-43,2 mm)
1/0 AWG-350 kcmil
(60-185 mm²)
3M™ Trifurcating Accessory for
3-C to 3 Single Conductors MT-E
1
5798A-MT 054007-43420 1.24"-2.07"
(31,5-52,6 mm)
350-1000 kcmil
(185-500 mm²)
3M™ Trifurcating Accessory for
3-C to 3 Single Conductors MT-E
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand12.QXD 7/10/2013 8:11 PM Page 226
. * Selection Table 'Tynmal Cnmmm Size Range >AwG/kcrml 5797A7MT 1/0 350 MTVE 5758A-MT 350 MT-E
PHONE: 800-245-3573 www.3M.com/Electrical 227
35 kV: 3M™ Cold Shrink Splice Kits: Three Conductor (3/C)
3M™ Cold Shrink MT-E Trifurcating
Accessory Kit (One 3/C to Three 1/C) for 35
kV
3M™ Cold Shrink MT-E Trifurcating Accessory Kit is used to break out and
seal a transition from 3/C to three 1/C.
For use with 3M™ Cold Shrink QS-III Splicing Series 5700A-MT.
Note: Cable sizes shown below are for standard insulation thickness.
Final determining factor is cable insulation O.D.
Voltage: 35 kV
Number of Conductors: One 3/C to three 1/C
Order No. UPC Single Conductor Jacket O.D. Kits per Case
MT-E 051128-54318 1.13"-1.80" (28,7-45,7 mm) 1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand12.QXD 7/10/2013 8:11 PM Page 227
228 FAX: 800-245-0329
35 kV: 3M™ Molded Rubber Splice Kits: Single Conductor (1/C)
3M™ Molded Rubber QS CN/JCN Cable Splice Kits 5432 and 5433
3M™ Molded Rubber QS CN/JCN Cable Splice Kits 5432 and 5433 are inline splices designed for use on 35 kV CN or JCN cable. Meets requirements of
IEEE 404.
Important: On all QS kits use the primary insulation O.D. range for final ordering criteria. For copper or aluminum conductor cable, select the correct splice
with connector from the table provided. Jacketing kit is needed for JCN cable.
Each kit makes one splice. Connectors are packed in kits when indicated.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 35 kV
Number of Conductors Single Conductor
Shielding Type Concentric Neutral (CN), Jacketed
Concentric Neutral (JCN)
Splice Type Inline
Technology Molded Rubber
Order No. UPC Insulation O.D. Range Conductor Size Connector Included Case Qty.
5432 054007-02338 1.06"-1.21" (26,9-30,7 mm) 2-1/0 AWG - 1
5432-CI-1A 054007-08357 1.06"-1.21" (26,9-30,7 mm) 1 AWG (Stranded);
1/0 AWG (Solid)
CI-1A 1
5432-CI-1/0A 054007-31222 1.06"-1.21" (26,9-30,7 mm) 1/0 AWG (Stranded) CI-1/0A 1
5433 054007-02339 1.12"-1.32" (28,4-33,5 mm) 3/0-4/0 AWG - 1
5433-CI-3/0B 054007-49485 1.12"-1.32" (28,4-33,5 mm) 3/0 AWG CI-3/0B 1
5433-CI-4/0B 054007-49486 1.12"-1.32" (28,4-33,5 mm) 4/0 AWG CI-4/0B 1
Medium Voltage Splice Kits, 5 kV–46 kV
Concentric Neutral (CN) Cable
Jacketed Concentric Neutral (JCN) Cable
IronwoodPremium_243201_Catalog-On-Demand12.QXD 7/10/2013 8:11 PM Page 228
PHONE: 800-245-3573 www.3M.com/Electrical 229
35 kV: 3M™ Molded Rubber Splice Kits: Single Conductor (1/C)
3M™ Molded Rubber QS-II CN/JCN Cable Splice Kits 5461
3M™ Molded Rubber QS-II CN/JCN Cable Splice Kits 5461 Series are inline splices designed for use on 35 kV CN or JCN cable. Meets requirements of IEEE
404.
Important: On all QS kits use the primary insulation O.D. range for final ordering criteria. For copper or aluminum conductor cable, select the correct splice
with connector from the table provided. Jacketing kit is needed for JCN cable.
Each kit makes one splice. Connectors are packed in kits when indicated.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 35 kV
Number of Conductors Single Conductor
Shielding Type Concentric Neutral (CN), Jacketed
Concentric Neutral (JCN)
Splice Type Inline
Technology Molded Rubber
Order No. UPC Insulation O.D. Range Conductor Size Connector Included Case Qty.
5461 054007-09129 1.00"-1.15" (25,4-29,2 mm) 1-1/0 AWG - 1
5461-CI-1/0A 054007-09156 1.00"-1.15" (25,4-29,2 mm) 1/0 AWG CI-1/0A 1
5461-CI-1/0-840 054007-09157 1.00"-1.15" (25,4-29,2 mm) 1/0 AWG CI-1/0-840 1
3M™ Connectors CI-A and CI-840 Series
for 3M™ Molded Rubber QS Cable Splice
Kits 5432 and 5461 Series
3M™ Aluminum Connectors CI Series are for splicing applications on
aluminum or copper cable conductors.
The aluminum connectors CI Series are specially designed for use with 3M™ Molded Rubber QS Cable Splice Bodies. These connectors meet the
requirements of ANSI C119.4.
Barrel Style Standard Barrel
Connector Base
Material Aluminum
For use with Aluminum or Copper Conductors
Order No. UPC Stranded Conductor Size, Cu or Al Solid Conductor Size, Cu or Al Connector O.D. Case Qty.
CI-1A 054007-00722 2-1 AWG 1-1/0 AWG 0.91" (23,1 mm) 10
CI-1/0A 054007-14176 1/0 AWG - 0.91" (23,1 mm) 10
CI-1/0-840 054007-09137 1/0 AWG - 0.91" (23,1 mm) 10
CI-3/0B - 3/0 AWG 3/0 AWG 0.91" (23,1 mm) 10
CI-4/0B - 4/0 AWG 4/0 AWG 0.91" (23,1 mm) 10
Medium Voltage Splice Kits, 5 kV–46 kV
Concentric Neutral (CN) Cable
Jacketed Concentric Neutral (JCN) Cable
IronwoodPremium_243201_Catalog-On-Demand12.QXD 7/10/2013 8:11 PM Page 229
.Cl u: -. I- . - - , mm H mnmwmwtwwzummsm-m-ucaw My mum um mm mm;
230 FAX: 800-245-0329
35 kV: 3M™ PILC Splice Kits: Single Conductor (1/C)
3M™ Cold Shrink QS-III 1/C Transition Splice Kits 5530A-1T-PILC Series
3M™ Cold Shrink QS-III 1/C Transition Splice Kits, 5530A-1T-PILC Series (which includes 5535A-1T-PILC, 5536A-1T-PILC, and 5537A-1T-PILC) are 35 kV
class inline splices designed to transition single-conductor PILC to Poly/EPR cable and meet the 35 kV voltage class rating requirements of IEEE Std. 404.
The splice kits include an oil barrier system based on a cold shrink tube design of specially formulated, oil-resistant polymer, and laboratory tested to
nominal internal pressures of 40 psi with no oil leakage. The splice body itself is a one-piece molded design made of specially formulated silicone rubber. An
EPDM rubber foldback cold shrink jacket is included for physical protection and environmental sealing.
Each kit contains sufficient material to make one splice. Connector is not provided with the kits due to customer specific application requirements. To
ensure a positive oil stop, a non-tapered, sealed connector (with a solid center barrier) should be used.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 35 kV
Number of Conductors Single Conductor
Shielding Type Paper Insulated Lead Covered (PILC)
Splice Type Inline PILC Transition
Technology Cold Shrink
Order No. UPC
051128-
Max. O.D. Over Lead
Sheath
PILC Cable Insul.
O.D.
Poly/EPR Cable
Insul. O.D.
PILC Cable
Conductor
Size 100%
PILC Cable Conductor
Size 133%
Poly/EPR
Cable
Conductor
Size
Case
Qty.
5535A-1T-PILC -57201 1.50"
(38,1 mm)
1.10"-1.31"
(27,9-33,3 mm)
1.07"-1.70"
(27,2-43,2 mm)
1/0-4/0 AWG
(60-95 mm²)
1/0-2/0 AWG
(60 mm²)
1/0 AWG-350
kcmil
(60-185 mm²)
1
5536A-1T-PILC -57202 1.88"
(47,8 mm)
1.32"-1.67"
(33,5-42,4 mm)
1.11"-1.70"
(28,2-43,2 mm)
250-450 kcmil
(150-200 mm²)
3/0 AWG-450 kcmil
(95-200 mm²)
3/0 AWG-500
kcmil
(95-240 mm²)
1
5537A-1T-PILC -57203 2.23"
(56,6 mm)
1.57"-2.0"
(39,9-50,8 mm)
1.24"-2.07"
(31,5-52,6 mm)
500-1000
kcmil
(240-500 mm²)
500-900 kcmil
(240-400 mm²)
500-1000
kcmil
(240-500
mm²)
1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand12.QXD 7/10/2013 8:11 PM Page 230
PHONE: 800-245-3573 www.3M.com/Electrical 231
46 kV Medium Voltage Splices
The following 3M products cover splicing needs
for applications up to 46 kV, and promote
dependable performance, stability and long life
with every splice you make.
Medium Voltage Splice Kits, 5 kV–46 kV
Section Page
46 kV................................................................................................231-232
3M™ Cold Shrink Splice Kits...................................................................................................232
Single Conductor (1/C)....................................................................................................................................232
3M™ Cold Shrink QS-III Inline Shielded Splice Kit 5545A................................................................................................................232
IronwoodPremium_243201_Catalog-On-Demand12.QXD 7/10/2013 8:11 PM Page 231
VWe Shielded Cab‘e 7 ¥ UniShie‘d’Cable ”WW ‘- Longimdinany Corrugated (LC) Shielded Cable
232 FAX: 800-245-0329
46 kV: 3M™ Cold Shrink Splice Kits: Single Conductor (1/C)
3M™ Cold Shrink QS-III Inline Shielded Splice Kit 5545A
3M™ Cold Shrink QS-III Splic Kit 5545A Series are inline splices for joining 46 kV Tape, Wire, LC, and UniShield® power cables. The cold shrink splice body
is a one-piece molded design made of specially formulated silicone rubbers, while the jacketing is made of EPDM rubber for its special physical properties.
Each splice is high-voltage production tested to ensure reliability.
The splice can be used with standard copper (Cu) or aluminum (Al/Cu) inline compression (crimp type) connectors, and can be used for size transitions
within the listed kit size range. The kit is designed to exceed minimum industry test standards, and has a BIL rating of 250 kV. The 3M™ Cold Shrink QS-III
Splice 5545A meets or exceeds the 46 kV Voltage Class rating requirements of IEEE 404.
Each kit makes one splice. Connectors are not included in the kit and must be ordered separately.
Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Voltage 46 kV
Number of Conductors Single Conductor
Shielding Type Tape Shield, Wire Shield, UniShield®,
Longitudinally Corrugated (LC)
Splice Type Inline
Technology Cold Shrink
Order No. UPC Insulation O.D. Range Conductor Size Connector Case
Qty.
5545A 051128-55089 1.24"-2.07"
(31,5-52,6 mm)
4/0-1000 kcmil* (120-500 mm²)
*4/0 AWG - 250 kcmil cable may be used with aluminum connectors
only - do not use 4/0 AWG or 250 kcmil copper connector.
-1
Medium Voltage Splice Kits, 5 kV–46 kV
IronwoodPremium_243201_Catalog-On-Demand12.QXD 7/10/2013 8:11 PM Page 232

Products related to this Datasheet

SPACER TAPE
Available Quantity: 40
Unit Price: 75
CONN WIRE NUT 10-18 AWG TWIST ON
Available Quantity: 23
Unit Price: 6.46
COLD SHRINK TUB 0.95"-1.94"X12"
Available Quantity: 16
Unit Price: 67.02
COLD SHRINK TUBING 0.55-1.18X9"
Available Quantity: 14
Unit Price: 38.48
COLD SHRNK TUB 0.95"-1.94"X1.5'
Available Quantity: 10
Unit Price: 124.02
COLD SHRINK TUBING 0.67-1.38X12"
Available Quantity: 10
Unit Price: 47.68
COLD SHRINK TUBING 0.55-1.18X9"
Available Quantity: 3
Unit Price: 40.31
COLD SHRINK TUBING 0.67-1.38X12"
Available Quantity: 2
Unit Price: 51.08
COLD SHRINK TUBING 0.10-0.82X8"
Available Quantity: 0
Unit Price: 42.91
CONN WIRE NUT 10-18 AWG TWIST ON
Available Quantity: 0
Unit Price: 6.46
CONN WIRE NUT 10-18 AWG TWIST ON
Available Quantity: 0
Unit Price: 4.4965