LQW15ANyyyy00D Spec Sheet

Murata Electronics North America

View All Related Products | Download PDF Datasheet

Datasheet

Chip Inductors (Chip Coils)
O05E.pdf
Jan.25,2019
EU RoHS Compliant
F**2&#.0-"3!21',2&'1!2*-%!-+.*7
5'2&-@
F-'12&#30-.#,'0#!2'4#
|z{{GG-,2&##120'!2'-,-$2&#
1#-$#02',80"-313 12,!#1',
*#!20'!*,"*#!20-,'!/3'.+#,2@
FFor+-0#"#2'*1A.*#1#0#$#r2o-ur5# 
.%#A3021..0-!&$-0-
H&22.1BGG555@+302@!-+G#,Q#3G13..-02G
!-+.*',!#G0-&1J@
Because of the difference of measurement condition, electrical characteristics plots on this catalog may have some difference to official specification value.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Contents
Product Guide p2
Part Number Quick Reference p271
Please check the MURATA website (https://www.murata.com/)
if you cannot find a part number in this catalog.
Product specifications are as of August 2018.
Part Numbering p182
Product Detail p183
!Caution/Notice p263
Soldering and Mounting p265
Packaging p269
RF Inductors
Part Numbering p154
Product Detail p155
!Caution/Notice p172
Soldering and Mounting p174
Packaging p178
Inductors for General Circuits
Part Numbering p8
Product Detail p10
!Caution/Notice p136
Soldering and Mounting p138
Packaging p146
Inductors for Power Lines
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Inductors for Power LinesInductors for General CircuitsRF Inductors
Product Guide
Continued on the following page.
Series Size Code
in inch (in mm)
Structure Min. Max. Min.
Inductance Range Rated Current
Max.
DFE18SAN_E0
DFE18SAN_G0
DFE18SBN_E0
DFE201208S
DFE201210S
DFE201210U
DFE201610C
DFE201610E
DFE201610P
DFE201610R
DFE201612C
DFE201612E
DFE201612P
DFE201612R
DFE252007F
DFE252008C
DFE252008U
DFE252010C
DFE252010F
DFE252010P
DFE252010R
DFE252012C
DFE252012F
DFE252012P
DFE252012R
DFE322510C
DFE322512C
DFE322512F
FDSD0412
FDSD0415
FDSD0420
FDSD0420W
FDSD0512
FDSD0515
FDSD0518
FDV0530S
FDV0530
FCUL0530
FDSD0630
FCUL0624
FCUL0630
FDV0618
FDV0620
FDVE0630
FDVE0640
FDUE0630
FDUE0640
FDUE0650
FDA1055
FDUE1040D
FDVE1040
FCUL1040
FCUL1060
FDUE1245
Wire Wound
Metal Alloy
Core Type
Inductors for Power Lines
0603 (1608)
0603 (1608)
0603 (1608)
0805 (2012)
0805 (2012)
0805 (2012)
0806 (2016)
0806 (2016)
0806 (2016)
0806 (2016)
0806 (2016)
0806 (2016)
0806 (2016)
0806 (2016)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1210 (3225)
1210 (3225)
1210 (3225)
1515 (4040)
1515 (4040)
1515 (4040)
1515 (4040)
2019 (5249)
2019 (5249)
2019 (5249)
2020 (5050)
2423 (6258)
2522 (6357)
2726 (7066)
2926 (7366)
2926 (7366)
2926 (7467)
2926 (7467)
2926 (7467)
2926 (7467)
3026 (7667)
3026 (7667)
3026 (7667)
4242 (108108)
4440 (112100)
4440 (112100)
4540 (115100)
4640 (116100)
4848 (123121)
240nH
240nH
470nH
470nH
470nH
240nH
560nH
240nH
240nH
470nH
470nH
240nH
240nH
470nH
470nH
470nH
470nH
470nH
330nH
330nH
1μH
470nH
330nH
330nH
1μH
470nH
470nH
470nH
330nH
220nH
330nH
15μH
1μH
1μH
680nH
120nH
110nH
360nH
680nH
220nH
120nH
240nH
200nH
160nH
1.5μH
120nH
150nH
600nH
560nH
220nH
1.5μH
180nH
360nH
500nH
1μH
1μH
1μH
2.2μH
2.2μH
2.2μH
2.2μH
10μH
2.2μH
2.2μH
2.2μH
4.7μH
2.2μH
2.2μH
4.7μH
4.7μH
10μH
10μH
10μH
4.7μH
4.7μH
10μH
10μH
4.7μH
4.7μH
10μH
10μH
10μH
4.7μH
4.7μH
10μH
22μH
6.8μH
4.7μH
10μH
2.2μH
4.7μH
470nH
10μH
470nH
680nH
3.3μH
4.7μH
10μH
4.7μH
240nH
420nH
1μH
5.6μH
1μH
10μH
420nH
560nH
2.2μH
2A
2.1A
1.9A
1.8A
2.1A
2A
1.5A
1A
2A
1.6A
1.6A
1.8A
2.1A
1.7A
1.2A
1.1A
1A
1A
1.3A
1.7A
1.4A
1A
1.4A
2A
1.7A
1A
1.2A
1.7A
2.5A
2.9A
2.5A
1.5A
2.3A
3.2A
2.7A
4.5A
3.6A
16A
5.4A
17A
15A
4.1A
3.5A
3.1A
5A
27A
22A
16A
8A
18A
6.1A
34A
34A
17A
4.2A
4.9A
3.1A
4A
4.8A
6.5A
2.8A
6.3A
5.4A
3A
3.4A
6.6A
6.5A
3.5A
3.3A
3A
4.5A
3.5A
6.8A
5.7A
3A
3.8A
7.6A
6.6A
3.4A
3.8A
4.7A
6.7A
7.5A
12A
11A
1.9A
6.1A
7A
9A
18A
19.6A
18A
17A
24A
32A
14A
16.2A
20.7A
8.2A
36A
33A
18A
27.7A
32A
14.6A
53A
41A
30A
p10
p10
p11
p12
p13
p13
p14
p15
p16
p16
p17
p18
p19
p19
p20
p21
p22
p22
p23
p24
p25
p26
p26
p27
p28
p29
p30
p30
p31
p32
p33
p34
p34
p35
p36
p37
p37
p38
p39
p40
p40
p41
p42
p43
p44
p44
p45
p46
p46
p47
p48
p49
p49
p50
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2
Continued on the following page.
Series Size Code
in inch (in mm)
Structure Min. Max. Min.
Inductance Range Rated Current
Max.
FDA1254
FDUE1260
LQW15DN_00
LQH2MCN_02
LQH2MCN_52
LQH2MPN_GR
LQH2HPN_DR
LQH2HPN_GR
LQH2HPN_JR
LQH31CN_03
LQH32CN_23
LQH32CN_33
LQH32CN_53
LQH32DN_23
LQH32DN_53
LQH32PB_N0
LQH32PB_NC
LQH32PN_N0
LQH32PN_NC
DEM2812C
DEM2815C
DEM2818C
LQH3NPN_GR
LQH3NPN_JR
LQH3NPN_ME
DEM3512C
DEM3518C
LQH44PN_GR
LQH44PN_J0
LQH44PN_P0
LQH43CN_03
LQH43CN_33
LQH43PB_26
LQH43PN_26
DEM4518C
LQH5BPB_T0
LQH5BPN_38
LQH5BPN_T0
D52LC
D53LC High Current
D53LC Low Rdc
LQH55DN_03
D63LCB
DG6028C
DG6045C
DG6050C
LQH66SN_03
DS75LC
DEM8030C
DEM8040C
DEM8045C
DG8040C
DEM10050C
DEM10050C_DD
Wire Wound
Ferrite Core Type
Wire Wound Metal
Alloy Core Type
Inductors for Power Lines
5049 (126125)
5650 (143127)
0402 (1005)
0806 (2016)
0806 (2016)
0806 (2016)
1008 (2520)
1008 (2520)
1008 (2520)
1206 (3216)
1210 (3225)
1210 (3225)
1210 (3225)
1210 (3225)
1210 (3225)
1210 (3225)
1210 (3225)
1210 (3225)
1210 (3225)
1211 (3028)
1211 (3028)
1211 (3028)
1212 (3030)
1212 (3030)
1212 (3030)
1514 (3735)
1514 (3735)
1515 (4040)
1515 (4040)
1515 (4040)
1812 (4532)
1812 (4532)
1812 (4532)
1812 (4532)
1818 (4745)
2020 (5050)
2020 (5050)
2020 (5050)
2020 (5252)
2020 (5252)
2020 (5252)
2220 (5750)
2424 (6060)
2424 (6060)
2424 (6060)
2424 (6060)
2525 (6363)
2929 (7373)
3131 (8080)
3131 (8080)
3131 (8080)
3131 (8080)
3939 (100100)
3939 (100100)
680nH
450nH
10μH
1μH
1μH
330nH
470nH
470nH
470nH
120nH
1μH
150nH
1μH
1μH
1μH
470nH
470nH
470nH
470nH
470nH
470nH
470nH
470nH
680nH
1μH
680nH
560nH
680nH
1μH
1μH
1μH
560nH
1μH
1μH
1.2μH
470nH
1μH
470nH
1.2μH
1.1μH
4.7μH
120nH
1μH
1μH
1μH
1.2μH
270nH
1μH
1.5μH
1.5μH
1.5μH
1μH
1.5μH
1.5μH
8μH
450nH
15μH
82μH
22μH
82μH
22μH
100μH
22μH
100μH
560μH
10μH
100μH
560μH
100μH
120μH
22μH
120μH
22μH
12μH
15μH
12μH
250μH
47μH
100μH
22μH
22μH
47μH
47μH
22μH
470μH
3.9μH
220μH
220μH
22μH
22μH
150μH
22μH
100μH
100μH
220μH
10mH
150μH
22μH
100μH
100μH
10mH
470μH
47μH
33μH
47μH
100μH
33μH
33μH
9.1A
34A
100mA
90mA
130mA
210mA
270mA
210mA
540mA
80mA
60mA
450mA
100mA
60mA
100mA
200mA
650mA
200mA
650mA
760mA
800mA
1A
140mA
570mA
430mA
530mA
880mA
410mA
380mA
800mA
90mA
1.6A
240mA
240mA
1A
1.4A
650mA
1.4A
260mA
440mA
330mA
50mA
440mA
1.7A
900mA
1.2A
50mA
430mA
1.3A
2.4A
2.1A
1.3A
3.5A
3.5A
29.1A
34A
120mA
485mA
595mA
2.2A
1.67A
2.9A
3.5A
970mA
800mA
1.45A
1A
800mA
1A
3.4A
4.4A
3.4A
4.4A
3.1A
3.9A
4.7A
2.82A
2.86A
3A
2.5A
3.4A
2.5A
2A
2.95A
1.08A
2.95A
3.4A
3.4A
3.5A
7.7A
7A
7.7A
2.44A
3.87A
2.18A
6A
4.52A
5.8A
9.5A
9.8A
6A
9.2A
7.5A
10A
11.2A
10.4A
15.3A
15.3A
p51
p52
p52
p53
p54
p55
p57
p58
p59
p60
p60
p61
p62
p63
p64
p65
p66
p67
p68
p69
p69
p70
p71
p72
p74
p76
p76
p77
p78
p79
p80
p81
p82
p83
p84
p85
p86
p87
p88
p89
p90
p91
p92
p93
p93
p94
p95
p96
p98
p98
p99
p100
p101
p102
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
3
Continued on the following page.
Series Size Code
in inch (in mm)
Structure Min. Max. Min.
Inductance Range Rated Current
Max.
DS104C2
DS106C2
DS126C2
LQM18FN_00
LQM18PN_B0
LQM18PN_C0
LQM18PN_D0
LQM18PN_DH
LQM18PN_F0
LQM18PN_FH
LQM18PN_FR
LQM18PN_GH
LQM18PW_CH
LQM21DN_00
LQM21FN_00
LQM21FN_70
LQM21FN_80
LQM21PN_C0
LQM21PN_CA
LQM21PN_CH
LQM21PN_EH
LQM21PN_G0
LQM21PN_GC
LQM21PN_GH
LQM21PN_GR
LQM21PN_GS
LQM2MPN_DH
LQM2MPN_EH
LQM2MPN_G0
LQM2MPN_GH
LQM2HPN_CH
LQM2HPN_E0
LQM2HPN_EH
LQM2HPN_G0
LQM2HPN_GC
LQM2HPN_GH
LQM2HPN_GS
LQM2HPN_J0
LQM2HPN_JH
LQM31PN_00
LQM32PN_G0
LQM32PN_GC
LQG15HN_02
LQG15HS_02
LQG18HN_00
LQP02HQ_02
LQP02TN_02
LQP02TQ_02
LQP03HQ_02
LQP03PN_02
LQP03TG_02
LQP03TN_02
LQP03TQ_02
LQP15MN_02
Multilayer Type
Multilayer Type
Film Type
Wire Wound
Ferrite Core Type
Inductors for Power LinesRF Inductors
4040 (101101)
4040 (101101)
4949 (125125)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0805 (2012)
0806 (2016)
0806 (2016)
0806 (2016)
0806 (2016)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1008 (2520)
1206 (3216)
1210 (3225)
1210 (3225)
0402 (1005)
0402 (1005)
0603 (1608)
01005 (0402)
01005 (0402)
01005 (0402)
0201 (0603)
0201 (0603)
0201 (0603)
0201 (0603)
0201 (0603)
0402 (1005)
1.1μH
1.2μH
1.7μH
1μH
1.5μH
470nH
2.5μH
2.2μH
1μH
470nH
220nH
1μH
1μH
1μH
1μH
4.7μH
4.7μH
470nH
2.2μH
470nH
240nH
470nH
1μH
470nH
1μH
2.2μH
2.2μH
240nH
470nH
160nH
240nH
560nH
240nH
470nH
1μH
240nH
2.2μH
1μH
470nH
470nH
1μH
1μH
1nH
1nH
1.2nH
0.2nH
0.2nH
0.2nH
0.6nH
2.2nH
0.1nH
0.6nH
0.6nH
1nH
120μH
330μH
680μH
10μH
1.5μH
2.2μH
2.5μH
2.2μH
1μH
2.2μH
4.7μH
3.3μH
2.5μH
47μH
47μH
10μH
10μH
2.2μH
2.2μH
2.2μH
2.2μH
3.3μH
2.2μH
4.7μH
4.7μH
4.7μH
2.2μH
2.2μH
4.7μH
2.2μH
2.2μH
560nH
2.2μH
4.7μH
4.7μH
2.2μH
4.7μH
3.3μH
2.2μH
4.7μH
1μH
1μH
120nH
270nH
100nH
56nH
39nH
22nH
150nH
4.7nH
120nH
270nH
110nH
33nH
970mA
690mA
580mA
50mA
600mA
700mA
700mA
650mA
600mA
700mA
620mA
1.05A
750mA
7mA
7mA
100mA
100mA
600mA
1.05A
1.05A
1.1A
800mA
800mA
1A
800mA
750mA
1.27A
1.1A
1.1A
1.3A
850mA
1.5A
1.3A
1.1A
800mA
1.5A
1A
1A
1.5A
700mA
1.8A
2.2A
150mA
110mA
350mA
100mA
90mA
120mA
80mA
900mA
80mA
60mA
70mA
60mA
11.7A
12A
11.8A
150mA
600mA
850mA
700mA
650mA
600mA
1.4A
1.25A
1.05A
950mA
60mA
220mA
120mA
120mA
1.1A
1.05A
1.6A
2.8A
1.3A
900mA
2.4A
1.3A
950mA
1.27A
4.1A
1.6A
5A
2.55A
1.5A
4.5A
1.8A
1.5A
5A
1.1A
1.5A
3.2A
1.4A
1.8A
2.2A
1A
1A
1.1A
1A
320mA
990mA
1.1A
1.4A
850mA
850mA
1A
400mA
p102
p103
p104
p106
p106
p107
p108
p108
p109
p110
p110
p111
p112
p113
p113
p114
p115
p115
p116
p117
p118
p119
p120
p121
p121
p122
p123
p124
p124
p126
p126
p127
p128
p129
p130
p130
p131
p132
p133
p133
p134
p135
p183
p185
p188
p189
p193
p196
p199
p203
p203
p206
p210
p214
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
4
Series Size Code
in inch (in mm)
Structure Min. Max. Min.
Inductance Range Rated Current
Max.
LQP18MN_02
LQW03AW_00
LQW04AN_00
LQW04AN_10
LQW15AN_00
LQW15AN_10
LQW15AN_80
LQW15AW_80
LQW18AN_00
LQW18AN_10
LQW18AN_80
LQW18AS_00
LQW18AS_0C
LQW2BAN_00
LQW2BAS_00
LQW2BHN_03
LQW2BHN_13
LQW2UAS_00
LQW31HN_03
LQW15CN_00
LQW15CN_10
LQW18CN_00
LQW21HN_00
LQH31HN_03
LQW04CA_00
LQW15CA_00
LQW18CA_00
LQH31MN_03
LQH32MN_23
LQH44NN_03
LQH43MN_03
LQH43NN_03
LQB15NN_10
LQB18NN_10
LQM18JN_00
LQM18NN_00
LQM21NN_10
Film Type
Wire Wound
Non-Magnetic Core
Type
RF InductorsInductors for General Circuits
0603 (1608)
0201 (0603)
03015 (0804)
03015 (0804)
0402 (1005)
0402 (1005)
0402 (1005)
0402 (1005)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0603 (1608)
0805 (2015)
0805 (2015)
0805 (2015)
0805 (2015)
1008 (2520)
1206 (3216)
0402 (1005)
0402 (1005)
0603 (1608)
0805 (2012)
1206 (3216)
03019 (0805)
0402 (1005)
0603 (1608)
1206 (3216)
1210 (3225)
1515 (4040)
1812 (4532)
1812 (4532)
0402 (1005)
0603 (1608)
0603 (1608)
0603 (1608)
0805 (2012)
1.3nH
1nH
0.8nH
36nH
1.5nH
1.3nH
1.3nH
51nH
2.2nH
2.2nH
2.2nH
1.6nH
4.3nH
3.2nH
2.7nH
3.3nH
2.7nH
12nH
8.8nH
18nH
20nH
4.9nH
470nH
54nH
60nH
22nH
32nH
150nH
1μH
510nH
1μH
1μH
220nH
220nH
100nH
47nH
100nH
100nH
15.5nH
33nH
56nH
120nH
8.4nH
75nH
220nH
470nH
33nH
390nH
390nH
390nH
200nH
1μH
470nH
27nH
4.7μH
100nH
200nH
3.3μH
650nH
2.2μH
880nH
510nH
2μH
580nH
100μH
560μH
470μH
1.5mH
2.4mH
560nH
560nH
160nH
2.2μH
4.7μH
50mA
230mA
140mA
180mA
110mA
640mA
320mA
220mA
75mA
550mA
190mA
100mA
100mA
750mA
170mA
160mA
900mA
260mA
230mA
390mA
130mA
430mA
75mA
180mA
200mA
130mA
450mA
45mA
40mA
145mA
40mA
25mA
300mA
300mA
550mA
15mA
30mA
300mA
900mA
1.8A
200mA
1A
1.2A
3.15A
480mA
850mA
1.4A
3.2A
700mA
700mA
3.8A
910mA
1.32A
1.9A
1A
750mA
1.4A
2.2A
2.6A
160mA
920mA
620mA
1.3A
2.2A
250mA
445mA
4.5A
500mA
500mA
380mA
450mA
650mA
50mA
250mA
Wire Wound
Ferrite Core Type
Wire Wound
Ferrite Core Type
Multilayer Type
p215
p216
p218
p222
p223
p228
p230
p236
p237
p240
p241
p245
p247
p248
p250
p252
p254
p254
p257
p258
p258
p260
p261
p261
p155
p155
p157
p158
p160
p162
p163
p165
p167
p168
p169
p169
p170
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
5
MEMO
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
6
Part Numbering p8
Product Detail p10
!Caution/Notice p136
Soldering and Mounting p138
Packaging p146
Inductors for Power Lines
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
7
Inductors for Power LinesInductors for General CircuitsRF Inductors
o Part Numbering
(Part Number)
Inductors for Power Lines
3214675 89:
1.0x0.5mm
1.6x0.8mm
2.0x1.25mm
2.0x1.6mm
2.5x2.0mm
3.0x3.0mm
3.2x1.6mm
3.2x2.5mm
4.5x3.2mm
4.0x4.0mm
5.0x5.0mm
5.7x5.0mm
6.3x6.3mm
0402
0603
0805
0806
1008
1212
1206
1210
1812
1515
2020
2220
2525
Code Nominal Dimensions (LxW) Size Code (in inch)
15
18
21
31
32
43
44
1Product ID
LQ Chip Inductors (Chip Coils)
Product ID
2Structure
21
MLQ P R54 MN G 0 D
H
M
W
Wire Wound Type (Ferrite Core)
Multilayer Type (Ferrite Core)
Wire Wound Type (Ferrite Core)
Code Structure
5Category
N
B
W
Code Category
8Features (Except for LQH
pp
P/LQM
pp
P)
0
2
3
5
7
8
LQM/LQH/LQW
LQH32C/32D
LQH32C/43CN
LQH2MC/32C/32D
LQM21F
Code Series
7Inductance Tolerance
6Inductance
K
M
N
±10%
±20%
±30%
Code Inductance Tolerance
4Applications and Characteristics
3Dimensions (LxW)
15
18
21
2M
2H
3N
31
32
43
44
5B
55
66
Expressed by three-digit alphanumerics. The unit is micro-henry
(μH). The first and second figures are significant digits, and the
third figure expresses the number of zeros that follow the two
figures. If there is a decimal point, it is expressed by the capital
letter "R." In this case, all figures are significant digits. If inductance
is less than 0.1μH, the inductance code is expressed by a
combination of two figures and the capital letter "N," and the unit
of inductance is nano-henry (nH). The capital letter "N" indicates
the unit of "nH," and also expresses a decimal point. In this case, all
figures are significant digits. For those products whose inductance
values are specified using three designated digits, these values may
be indicated using the closest two digits instead.
D
F
D
S
C
P
D
for Choke (Low-current DC Power Supplies)
for Choke (DC Power Supplies)
for Choke
for Choke (Magnetically Shielded Type)
for Choke (Coating Type)
for Power Line
Code Applications and Characteristics
LQM
LQH
LQM/LQH
LQW
Series
Standard Type
Special Feature Classification
Standard Type
Standard Type
Low DC Resistance
Low Profile Type
Large Current Type
Low DC Resistance
/Large Current Type
Features
8Thickness
(LQHppP/LQMppP,*7F6!#.2$-0LQH43P/LQH5BPN_38)
B
C
D
E
F
0
G
J
M
N
P
T
0.35mm
0.5mm
0.6mm
0.7mm
0.8mm
0.85mm
0.9mm
1.1mm
1.4mm
1.55mm
1.65mm
2.0mm
Code Nominal Dimensions (T)
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
8
Inductors for Power LinesInductors for General CircuitsRF Inductors
89Thickness (LQH43P/LQH5BPN_38 Only)
26
38
2.6mm
4.0mm max.
Code Dimensions (T)
:Packaging
K
F
L
E
B
J
D
Embossed Taping (ø330mm Reel)
Embossed Taping (ø180mm Reel)
Bulk
Paper Taping (ø330mm Reel)
Paper Taping (ø180mm Reel)
Code Packaging
Continued from the preceding page.
9Electrode (Except for LQHppP/LQMppP)
F#"H J0##
0
2
3
LQM/LQW
LQH2MC
LQH (Except for LQH2MC)
Code Series
Sn
-*"#0
Electrode
9Specification
(LQHppP/LQMppP,*7F6!#.2$-0LQH43P/LQH5BPN_38)
0/S
C
H/A/E
R
Standard Type
Good Bias Current Characteristics Type
'%&.#!7.#H-5#1'12,!#C
Good Bias Current Characteristics Type)
-5#1'12,!#7.#
Code Specification
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
9
Inductors for Power LinesInductors for General CircuitsRF Inductors
Inductors for Power Lines
DFE18SAN_E0 Series 0603 (1608) inch (mm)
0.8 max.
1.6±0.2
(in mm)
0.8±0.2
0.3±0.2
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE18SANR24ME0p0.24μH ±20% 1MHz 4200mA 3200mA 0.036Ω
DFE18SANR47ME0p0.47μH ±20% 1MHz 3100mA 2400mA 0.064Ω
DFE18SANR56ME0p0.56μH ±20% 1MHz 2600mA 2200mA 0.070Ω
DFE18SAN1R0ME0p1.0μH ±20% 1MHz 2000mA 1600mA 0.144Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
The saturation allowable DC current value is specified when the decrease of the initial inductance value at 30%. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
DFE18SAN_G0 Series 0603 (1608) inch (mm)
1.0 max. 0.8±0.2
0.8±0.21.6±0.2
Marking
(in mm)
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
10
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE18SAN_E0
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE18SANR24MG0p0.24μH ±20% 1MHz 4900mA 3500mA 0.030Ω
DFE18SANR47MG0p0.47μH ±20% 1MHz 3300mA 2600mA 0.054Ω
DFE18SAN1R0MG0p1.0μH ±20% 1MHz 2100mA 1700mA 0.128Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
The saturation allowable DC current value is specified when the decrease of the initial inductance value at 30%. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
DFE18SBN_E0 Series 0603 (1608) inch (mm)
0.8 max.
1.6±0.2
(in mm)
0.8±0.2
0.3±0.2
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE18SBNR47ME0p0.47μH ±20% 1MHz 3100mA 2400mA 0.06Ω
DFE18SBN1R0ME0p1.0μH ±20% 1MHz 1900mA 1800mA 0.12Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
The saturation allowable DC current value is specified when the decrease of the initial inductance value at 30%. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
11
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE18SBN_E0
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
DFE201208S Series 0805 (2012) inch (mm)
(in mm)
2.0±0.2 1.2±0.2
0.8 max.
0.5±0.3 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE201208S-R47Mp0.47μH ±20% 1MHz 4000mA 3000mA 0.042Ω
DFE201208S-1R0Mp1.0μH ±20% 1MHz 2700mA 2100mA 0.084Ω
DFE201208S-1R5Mp1.5μH ±20% 1MHz 2300mA 1800mA 0.120Ω
DFE201208S-2R2Mp2.2μH ±20% 1MHz 1800mA 1400mA 0.204Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
110
L (μH)
2.2μH
1.5μH
1.0μH 0.47μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
2.2μH
Inductance (μH)
1.5μH
1.0μH
0.47μH
0.0
0.5
1.0
1.5
2.0
2.5
0 7654321
Temperature Rise Characteristics (Typ.)
2.2μH
1.5μH
0.47μH
1.0μH
0
10
20
30
40
50
60
70
0 54321
ΔT (°C)
DC Current (A)
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
12
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE201208S
DFE201210S Series 0805 (2012) inch (mm)
(in mm)
2.0±0.2 1.2±0.2
1.0 max.
0.5±0.2 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE201210S-R47Mp0.47μH ±20% 1MHz 4800mA 3400mA 0.032Ω
DFE201210S-1R0Mp1.0μH ±20% 1MHz 3200mA 2300mA 0.070Ω
DFE201210S-1R5Mp1.5μH ±20% 1MHz 2700mA 2000mA 0.096Ω
DFE201210S-2R2Mp2.2μH ±20% 1MHz 2100mA 1500mA 0.155Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
0.01
0.1 101
10
1
0.1
2.2μH
1.0μH 0.47μH
1.5μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
2.2μH
Inductance (μH)
1.5μH
1.0μH
0.47μH
0.0
0.5
1.0
1.5
2.0
2.5
0 108624
Temperature Rise Characteristics (Typ.)
0
10
0 654321
20
30
40
50
60
70
80
ΔT (°C)
DC Current (A)
2.2μH
0.47μH
1.5μH
1.0μH
DFE201210U Series 0805 (2012) inch (mm)
(in mm)
2.0±0.2 1.2±0.2
1.0 max.
0.5±0.3 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
13
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE201210S
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE201210U-R24Mp0.24μH ±20% 1MHz 6500mA 3800mA 0.025Ω
DFE201210U-R33Mp0.33μH ±20% 1MHz 5200mA 3400mA 0.031Ω
DFE201210U-R47Mp0.47μH ±20% 1MHz 4400mA 3000mA 0.042Ω
DFE201210U-R68Mp0.68μH ±20% 1MHz 3600mA 2400mA 0.060Ω
DFE201210U-1R0Mp1.0μH ±20% 1MHz 3100mA 2000mA 0.095Ω
DFE201210U-1R5Mp1.5μH ±20% 1MHz 2500mA 1600mA 0.138Ω
DFE201210U-2R2Mp2.2μH ±20% 1MHz 2000mA 1200mA 0.228Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
2.2μH
110
Inductance (μH)
1.5μH
1.0μH
0.68μH
0.47μH 0.33μH
0.24μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
0
0.00
0.50
1.00
1.50
2.00
2.50
0.24μH
12 4356
Inductance (μH)
0.33μH
0.68μH
0.47μH
1.0μH
1.5μH
2.2μH
Temperature Rise Characteristics (Typ.)
DC Current (A)
0.47μH
2.2μH
Temperature rise (°C)
0.33μH
0.24μH
1.5μH
0
5
0 654321
50
10
15
20
25
30
35
40
1.0μH
0.68μH
45
DFE201610C Series 0806 (2016) inch (mm)
(in mm)
2.0±0.2 1.6±0.2
1.0 max.
0.5±0.3 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
1285AS-H-R56Mp0.56μH ±20% 1MHz 2800mA 2800mA 0.059Ω
1285AS-H-R68Mp0.68μH ±20% 1MHz 2600mA 2500mA 0.072Ω
1285AS-H-1R0Mp1.0μH ±20% 1MHz 2200mA 2000mA 0.096Ω
1285AS-H-1R5Mp1.5μH ±20% 1MHz 1800mA 1600mA 0.144Ω
1285AS-H-2R2Mp2.2μH ±20% 1MHz 1500mA 1200mA 0.204Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
14
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE201610C
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1.0
10.0
2.2μH
110
Inductance (μH)
1.5μH
1.0μH
0.68μH
0.56μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
2.2μH
Inductance (μH)
1.5μH
1.0μH
0.68μH
0.56μH
0.0
0.5
1.0
1.5
2.0
2.5
0.0 5.04.03.01.0 2.0
Temperature Rise Characteristics (Typ.)
DC Current (A)
0.68μH
Temperature rise (°C)
1.5μH
2.2μH
1.0μH
0
5
0.0 5.04.03.02.01.0
50
10
15
20
25
30
35
40
45
0.56μH
DFE201610E Series 0806 (2016) inch (mm)
(in mm)
2.0±0.2 1.6±0.2
1.0 max.
0.5±0.3 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE201610E-R24Mp0.24μH ±20% 1MHz 6300mA 4700mA 0.020Ω
DFE201610E-R33Mp0.33μH ±20% 1MHz 5500mA 4000mA 0.026Ω
DFE201610E-R47Mp0.47μH ±20% 1MHz 4800mA 3600mA 0.032Ω
DFE201610E-R68Mp0.68μH ±20% 1MHz 4300mA 3100mA 0.043Ω
DFE201610E-1R0Mp1.0μH ±20% 1MHz 3600mA 2700mA 0.057Ω
DFE201610E-1R5Mp1.5μH ±20% 1MHz 2900mA 2100mA 0.091Ω
DFE201610E-2R2Mp2.2μH ±20% 1MHz 2400mA 1700mA 0.140Ω
DFE201610E-4R7Mp4.7μH ±20% 1MHz 1600mA 1100mA 0.288Ω
DFE201610E-100Mp10μH ±20% 1MHz 1000mA 650mA 0.780Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
10μH
L (μH)
4.7μH
2.2μH 1.5μH
1.0μH 0.68μH 0.47μH 0.33μH
0.24μH
0.1
0.1 101
100
10
1
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
4.7μH
2.2μH 1.5μH
0.68μH
0.47μH
0.24μH
0.33μH
1.0μH
0
2
0 8642
4
6
8
10
12
Temperature Rise Characteristics (Typ.)
DC Current (A)
10μH
4.7μH
Temperature rise (°C)
0
10
15
5
20
30
35
25
40
45
50
0 8642
2.2μH
1.5μH
1.0μH
0.68μH
0.47μH
0.33μH
0.24μH
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
15
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE201610E
DFE201610P Series 0806 (2016) inch (mm)
(in mm)
2.0±0.2 1.6±0.2
1.0 max.
0.5±0.3 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE201610P-R24Mp0.24μH ±20% 1MHz 5400mA 3800mA 0.026Ω
DFE201610P-R33Mp0.33μH ±20% 1MHz 4700mA 3500mA 0.034Ω
DFE201610P-R47Mp0.47μH ±20% 1MHz 4000mA 3100mA 0.040Ω
DFE201610P-R68Mp0.68μH ±20% 1MHz 3600mA 2700mA 0.048Ω
DFE201610P-1R0Mp1.0μH ±20% 1MHz 3100mA 2200mA 0.070Ω
DFE201610P-1R5Mp1.5μH ±20% 1MHz 2500mA 1800mA 0.110Ω
DFE201610P-2R2Mp2.2μH ±20% 1MHz 2000mA 1400mA 0.168Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
1.0 10.0
L (μH)
2.2μH
1.5μH 1.0μH 0.68μH
0.47μH 0.33μH 0.24μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
2.2μH
Inductance (μH)
1.5μH
1.0μH
0.68μH
0.47μH
0.0
0.5
1.0
1.5
2.0
2.5
0 654
3
21
0.33μH
0.24μH
Temperature Rise Characteristics (Typ.)
DC Current (A)
Temperature rise (°C)
0
5
0 654321
50
10
15
20
25
30
35
40
45
2.2μH
1.5μH
1.0μH 0.68μH
0.47μH
0.33μH
0.24μH
DFE201610R Series 0806 (2016) inch (mm)
(in mm)
2.0±0.2 1.6±0.2
1.0 max.
0.5±0.3 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
16
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE201610P
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE201610R-H-R47Mp0.47μH ±20% 1MHz 3000mA 2800mA 0.048Ω
DFE201610R-H-1R0Mp1.0μH ±20% 1MHz 2200mA 2100mA 0.079Ω
DFE201610R-H-1R5Mp1.5μH ±20% 1MHz 1800mA 1800mA 0.118Ω
DFE201610R-H-2R2Mp2.2μH ±20% 1MHz 1600mA 1400mA 0.168Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1.0
10.0
110
Inductance (μH)
2.2μH
1.5μH
1.0μH 0.47μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
2.2μH
1.5μH
1.0μH
0.47μH
0.0
0.5
1.0
1.5
2.0
2.5
0.0 5.04.03.01.0 2.0
Temperature Rise Characteristics (Typ.)
DC Current (A)
Temperature rise (°C)
2.2μH
0
5
0.0 5.04.03.02.01.0
50
10
15
20
25
30
35
40
45
1.5μH
1.0μH
0.47μH
DFE201612C Series 0806 (2016) inch (mm)
(in mm)
2.0±0.2 1.6±0.2
1.2 max.
0.5±0.3
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
1286AS-H-R47Mp0.47μH ±20% 1MHz 3400mA 3200mA 0.052Ω
1286AS-H-1R0Mp1.0μH ±20% 1MHz 2500mA 2300mA 0.082Ω
1286AS-H-1R5Mp1.5μH ±20% 1MHz 2000mA 1800mA 0.114Ω
1286AS-H-2R2Mp2.2μH ±20% 1MHz 1600mA 1300mA 0.192Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
17
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE201612C
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1.0
10.0
110
Inductance (μH)
2.2μH
1.5μH
1.0μH
0.47μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
2.2μH
Inductance (μH)
1.5μH
1.0μH
0.47μH
0.0
0.5
1.0
1.5
2.0
2.5
0.0 5.04.03.01.0 2.0
Temperature Rise Characteristics (Typ.)
2.2μH
1.0μH
0.47μH
1.5μH
DC Current (A)
Temperature rise (°C)
0
5
0.0 5.04.03.02.01.0
50
10
15
20
25
30
35
40
45
DFE201612E Series 0806 (2016) inch (mm)
(in mm)
2.0±0.2 1.6±0.2
1.2 max.
0.5±0.3
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE201612E-R24Mp0.24μH ±20% 1MHz 6600mA 5000mA 0.019Ω
DFE201612E-R33Mp0.33μH ±20% 1MHz 6300mA 4800mA 0.021Ω
DFE201612E-R47Mp0.47μH ±20% 1MHz 5500mA 4500mA 0.026Ω
DFE201612E-R68Mp0.68μH ±20% 1MHz 4300mA 3500mA 0.033Ω
DFE201612E-1R0Mp1.0μH ±20% 1MHz 4000mA 2900mA 0.048Ω
DFE201612E-1R5Mp1.5μH ±20% 1MHz 3200mA 2300mA 0.072Ω
DFE201612E-2R2Mp2.2μH ±20% 1MHz 2400mA 1800mA 0.116Ω
DFE201612E-4R7Mp4.7μH ±20% 1MHz 1800mA 1200mA 0.252Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
4.7μH
110
L (μH)
2.2μH
0.68μH 0.47μH 0.33μH 0.24μH
1.5μH 1.0μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
4.7μH
Inductance (μH)
2.2μH
1.5μH
0.47μH
0.33μH
1.0μH
0.68μH
0.24μH
0.0
1.0
2.0
3.0
4.0
5.0
0.0 6.05.04.0
3.0
2.01.0
Temperature Rise Characteristics (Typ.)
DC Current (A)
4.7μH
Temperature Rise (°C)
2.2μH
1.5μH
1.0μH
0.24μH
0.47μH
0.68μH
0.0
10.0
20.0
30.0
40.0
50.0
0.0 6.05.04.0
3.0
2.01.0
0.33μH
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
18
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE201612E
DFE201612P Series 0806 (2016) inch (mm)
(in mm)
2.0±0.2 1.6±0.2
1.2 max.
0.5±0.3
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE201612P-R24Mp0.24μH ±20% 1MHz 6500mA 4400mA 0.023Ω
DFE201612P-R33Mp0.33μH ±20% 1MHz 5600mA 3900mA 0.028Ω
DFE201612P-R47Mp0.47μH ±20% 1MHz 4800mA 3700mA 0.033Ω
DFE201612P-1R0Mp1.0μH ±20% 1MHz 3300mA 2700mA 0.054Ω
DFE201612P-1R5Mp1.5μH ±20% 1MHz 2700mA 2000mA 0.095Ω
DFE201612P-2R2Mp2.2μH ±20% 1MHz 2100mA 1500mA 0.144Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
1.0 10.0
L (μH)
2.2μH
1.5μH 1.0μH
0.47μH
0.24μH
0.33μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
0.0
0.5
1.0
1.5
2.0
2.5
0.0 6.05.04.0
3.0
2.01.0
2.2μH
1.5μH
1.0μH
0.47μH 0.33μH
0.22μH
Temperature Rise Characteristics (Typ.)
DC Current (A)
0.22μH
Temperature Rise (°C)
2.2μH
0
10
20
30
40
50
0.0 6.05.04.0
3.0
2.01.0
1.5μH
1.0μH
0.33μH
0.47μH
DFE201612R Series 0806 (2016) inch (mm)
(in mm)
2.0±0.2 1.6±0.2
1.2 max.
0.5±0.3
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
19
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE201612P
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE201612R-H-R47Mp0.47μH ±20% 1MHz 3500mA 3200mA 0.040Ω
DFE201612R-H-1R0Mp1.0μH ±20% 1MHz 2600mA 2600mA 0.070Ω
DFE201612R-H-1R5Mp1.5μH ±20% 1MHz 2100mA 2000mA 0.094Ω
DFE201612R-H-2R2Mp2.2μH ±20% 1MHz 1700mA 1400mA 0.154Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1.0
10.0
110
Inductance (μH)
2.2μH
1.0μH
1.5μH
0.47μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
2.2μH
Inductance (μH)
1.5μH
1.0μH
0.47μH
0
0.5
1
1.5
2
2.5
0 654
3
21
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
0
5
0 54321
50
10
15
20
25
30
35
40
45
2.2μH
1.0μH
0.47μH
1.5μH
DFE252007F Series 1008 (2520) inch (mm)
(in mm)
2.5±0.2 2.0±0.2
0.6±0.2
0.7 max.
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE252007F-R47Mp0.47μH ±20% 1MHz 3300mA 2700mA 0.053Ω
DFE252007F-1R0Mp1.0μH ±20% 1MHz 2800mA 2100mA 0.085Ω
DFE252007F-1R5Mp1.5μH ±20% 1MHz 2100mA 1700mA 0.132Ω
DFE252007F-2R2Mp2.2μH ±20% 1MHz 1800mA 1400mA 0.182Ω
DFE252007F-3R3Mp3.3μH ±20% 1MHz 1500mA 1200mA 0.275Ω
DFE252007F-4R7Mp4.7μH ±20% 1MHz 1200mA 940mA 0.450Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
20
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE252007F
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
0.1
0.1 101
100
10
1
4.7μH 3.3μH 2.2μH
1.5μH 1.0μH 0.47μH
Inductance-Current Characteristics (Typ.)
0
0.5
0.0 7.05.0 6.04.03.02.01.0
5
Inductance (μH)
DC Current (A)
1
1.5
2
2.5
3
3.5
4
4.5
4.7μH
3.3μH
2.2μH
1.5μH 1.0μH
0.47μH
Temperature Rise Characteristics (Typ.)
0
10
0 54321
90
ΔT (°C)
DC Current (A)
20
30
40
50
60
70
80
4.7μH
3.3μH
2.2μH
0.47μH
1.0μH
1.5μH
DFE252008C Series 1008 (2520) inch (mm)
(in mm)
2.5±0.2 2.0±0.2
0.6±0.2
0.8 max.
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE252008C-R47Mp0.47μH ±20% 1MHz 3000mA 2000mA 0.060Ω
DFE252008C-1R0Mp1.0μH ±20% 1MHz 2300mA 1400mA 0.084Ω
DFE252008C-1R5Mp1.5μH ±20% 1MHz 2000mA 1200mA 0.126Ω
DFE252008C-2R2Mp2.2μH ±20% 1MHz 1600mA 950mA 0.180Ω
DFE252008C-3R3Mp3.3μH ±20% 1MHz 1300mA 850mA 0.252Ω
DFE252008C-4R7Mp4.7μH ±20% 1MHz 1100mA 650mA 0.438Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1.0
10.0
4.7μH
1.0 10.0
Inductance (μH)
3.3μH 2.2μH
1.5μH 1.0μH
0.47μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
4.7μH
Inductance (μH)
3.3μH
2.2μH
1.5μH
1.0μH
0.47μH
0
0.5
0 54321
5
1
1.5
2
2.5
3
3.5
4
4.5
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
4.7μH
0
10
20
30
40
50
0 4321
3.3μH
2.2μH
1.5μH
1.0μH
0.47μH
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
21
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE252008C
DFE252008U Series 1008 (2520) inch (mm)
(in mm)
2.5±0.2 2.0±0.2
0.6±0.2
0.8 max.
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE252008U-R47Mp0.47μH ±20% 1MHz 4500mA 3000mA 0.038Ω
DFE252008U-1R0Mp1.0μH ±20% 1MHz 3500mA 2300mA 0.070Ω
DFE252008U-1R5Mp1.5μH ±20% 1MHz 2700mA 1900mA 0.103Ω
DFE252008U-2R2Mp2.2μH ±20% 1MHz 2300mA 1500mA 0.150Ω
DFE252008U-4R7Mp4.7μH ±20% 1MHz 1600mA 1000mA 0.340Ω
DFE252008U-100Mp10μH ±20% 1MHz 1000mA 600mA 0.880Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
DFE252010C Series 1008 (2520) inch (mm)
(in mm)
2.5±0.2 2.0±0.2
1.0 max.
0.6±0.2 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
22
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE252008U
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
1269AS-H-R47Mp0.47μH ±20% 1MHz 3500mA 3100mA 0.046Ω
1269AS-H-1R0Mp1.0μH ±20% 1MHz 2700mA 2500mA 0.078Ω
1269AS-H-1R5Mp1.5μH ±20% 1MHz 2100mA 1900mA 0.108Ω
1269AS-H-2R2Mp2.2μH ±20% 1MHz 1900mA 1500mA 0.156Ω
1269AS-H-3R3Mp3.3μH ±20% 1MHz 1500mA 1200mA 0.228Ω
1269AS-H-4R7Mp4.7μH ±20% 1MHz 1300mA 1000mA 0.300Ω
1269AS-H-6R8Mp6.8μH ±20% 1MHz 1100mA 760mA 0.516Ω
1269AS-H-100Np10μH ±30% 1MHz 1000mA 680mA 0.689Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1 1.0 10.0
Inductance (μH)
10μH
2.2μH
6.8μH 4.7μH 3.3μH
1.5μH 1.0μH
0.47μH
100.0
10.0
1.0
0.1
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
6.8μH
4.7μH
3.3μH
2.2μH
1.5μH 1.0μH 0.47μH
0
1
0 654321
2
3
4
5
6
7
8
9
10
Temperature Rise Characteristics (Typ.)
DC Current (A)
10μH
ΔT (°C)
0
10
20
30
40
50
0 54312
6.8μH
4.7μH
1.5μH
3.3μH
2.2μH
1.0μH
0.47μH
DFE252010F Series 1008 (2520) inch (mm)
(in mm)
2.5±0.2 2.0±0.2
1.0 max.
0.6±0.2 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE252010F-R33Mp0.33μH ±20% 1MHz 6800mA 4800mA 0.021Ω
DFE252010F-R47Mp0.47μH ±20% 1MHz 6000mA 4400mA 0.027Ω
DFE252010F-R68Mp0.68μH ±20% 1MHz 5000mA 3500mA 0.037Ω
DFE252010F-R82Mp0.82μH ±20% 1MHz 4500mA 3300mA 0.040Ω
DFE252010F-1R0Mp1.0μH ±20% 1MHz 4100mA 3100mA 0.048Ω
DFE252010F-1R5Mp1.5μH ±20% 1MHz 3400mA 2500mA 0.072Ω
DFE252010F-2R2Mp2.2μH ±20% 1MHz 3100mA 2300mA 0.097Ω
DFE252010F-3R3Mp3.3μH ±20% 1MHz 2200mA 1600mA 0.170Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
23
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE252010F
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE252010F-4R7Mp4.7μH ±20% 1MHz 1900mA 1400mA 0.240Ω
DFE252010F-6R8Mp6.8μH ±20% 1MHz 1400mA 1100mA 0.420Ω
DFE252010F-8R2Mp8.2μH ±20% 1MHz 1350mA 1000mA 0.520Ω
DFE252010F-100Mp10μH ±20% 1MHz 1300mA 900mA 0.600Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
10μH
1.5μH
8.2μH 6.8μH
4.7μH 3.3μH 2.2μH
0.1
0.1
10
1
100
110
1.0μH 0.82μH 0.68μH 0.47μH 0.33μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
8.2μH
6.8μH
4.7μH
3.3μH
2.2μH
1.0μH1.5μH 0.82μH
0.68μH 0.47μH 0.33μH
0
2
3
1
4
5
6
7
8
9
10
0 1412108642
Temperature Rise Characteristics (Typ.)
DC Current (A)
10μH
ΔT (°C)
0
10
20
30
40
50
0 654
3
21
8.2μH
6.8μH
4.7μH
3.3μH
0.33μH
2.2μH
1.5μH
0.47μH
0.68μH
0.82μH
1.0μH
DFE252010P Series 1008 (2520) inch (mm)
(in mm)
2.5±0.2 2.0±0.2
1.0 max.
0.6±0.2 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE252010P-R33Mp0.33μH ±20% 1MHz 5700mA 3800mA 0.029Ω
DFE252010P-R47Mp0.47μH ±20% 1MHz 5000mA 3500mA 0.035Ω
DFE252010P-R68Mp0.68μH ±20% 1MHz 4100mA 3000mA 0.048Ω
DFE252010P-1R0Mp1.0μH ±20% 1MHz 3800mA 2700mA 0.054Ω
DFE252010P-1R2Mp1.2μH ±20% 1MHz 3200mA 2400mA 0.068Ω
DFE252010P-1R5Mp1.5μH ±20% 1MHz 3000mA 2100mA 0.082Ω
DFE252010P-2R2Mp2.2μH ±20% 1MHz 2600mA 1700mA 0.115Ω
DFE252010P-3R3Mp3.3μH ±20% 1MHz 2100mA 1400mA 0.195Ω
DFE252010P-4R7Mp4.7μH ±20% 1MHz 1700mA 1100mA 0.270Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
24
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE252010P
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
110
L (μH)
4.7μH
3.3μH 2.2μH 1.5μH
1.2μH 1.0μH 0.68μH 0.47μH 0.33μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
4.7μH
Inductance (μH)
3.3μH
2.2μH
1.5μH
1.2μH 1.0μH
0.68μH 0.47μH
0.33μH
0
1
2
3
4
5
0 12108
6
42
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
4.7μH
0
10
20
30
40
50
0 54312
3.3μH
2.2μH
1.5μH
0.47μH
0.33μH
0.68μH
1.0μH
1.2μH
DFE252010R Series 1008 (2520) inch (mm)
(in mm)
2.5±0.2 2.0±0.2
1.0 max.
0.6±0.2 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE252010R-H-1R0Mp1.0μH ±20% 1MHz 3000mA 2700mA 0.068Ω
DFE252010R-H-1R5Mp1.5μH ±20% 1MHz 2300mA 2100mA 0.090Ω
DFE252010R-H-2R2Mp2.2μH ±20% 1MHz 2100mA 1700mA 0.126Ω
DFE252010R-H-4R7Mp4.7μH ±20% 1MHz 1400mA 1100mA 0.276Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
Inductance (μH)
0.1 1.0 10.0
4.7μH
2.2μH
1.5μH 1.0μH
0.1
100.0
10.0
1.0
Inductance-Current Characteristics (Typ.)
DC Current (A)
4.7μH
Inductance (μH)
2.2μH
1.5μH
1.0μH
0
0.5
0 54321
5
1
1.5
2
2.5
3
3.5
4
4.5
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
4.7μH
0
10
20
30
40
50
0 4321
2.2μH
1.0μH
1.5μH
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
25
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE252010R
DFE252012C Series 1008 (2520) inch (mm)
(in mm)
2.5±0.2 2.0±0.2
1.2 max.
0.6±0.2 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
1239AS-H-R47Mp0.47μH ±20% 1MHz 3800mA 3700mA 0.039Ω
1239AS-H-1R0Mp1.0μH ±20% 1MHz 3000mA 3000mA 0.059Ω
1239AS-H-1R5Mp1.5μH ±20% 1MHz 2600mA 2400mA 0.072Ω
1239AS-H-2R2Mp2.2μH ±20% 1MHz 2200mA 2000mA 0.108Ω
1239AS-H-3R3Mp3.3μH ±20% 1MHz 1800mA 1500mA 0.144Ω
1239AS-H-4R7Mp4.7μH ±20% 1MHz 1500mA 1300mA 0.240Ω
1239AS-H-6R0Mp6.0μH ±20% 1MHz 1400mA 1100mA 0.275Ω
1239AS-H-6R8Mp6.8μH ±20% 1MHz 1300mA 1000mA 0.375Ω
1239AS-H-100Mp10μH ±20% 1MHz 1000mA 850mA 0.460Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
1.0
Frequency (MHz)
Inductance (μH)
10μH 6.8μH
6.0μH 4.7μH
2.2μH
3.3μH
0.1 1 10
1.5μH 1.0μH 0.47μH
0.1
100.0
10.0
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
6.8μH
6.0μH
3.3μH
4.7μH
2.2μH 1.5μH 1.0μH
0.47μH
0
2
4
6
8
10
0 654
3
21
Temperature Rise Characteristics (Typ.)
DC Current (A)
1.5μH
ΔT (°C)
10μH
0
10
20
30
40
50
0 54312
6.8μH
6.0μH
4.7μH
3.3μH
2.2μH 1.0μH
0.47μH
DFE252012F Series 1008 (2520) inch (mm)
(in mm)
2.5±0.2 2.0±0.2
1.2 max.
0.6±0.2 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
26
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE252012C
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE252012F-R33Mp0.33μH ±20% 1MHz 7600mA 5100mA 0.019Ω
DFE252012F-R47Mp0.47μH ±20% 1MHz 6700mA 4900mA 0.023Ω
DFE252012F-R68Mp0.68μH ±20% 1MHz 5400mA 3900mA 0.031Ω
DFE252012F-R82Mp0.82μH ±20% 1MHz 4900mA 3600mA 0.035Ω
DFE252012F-1R0Mp1.0μH ±20% 1MHz 4700mA 3300mA 0.040Ω
DFE252012F-1R5Mp1.5μH ±20% 1MHz 3800mA 2700mA 0.058Ω
DFE252012F-2R2Mp2.2μH ±20% 1MHz 3300mA 2300mA 0.082Ω
DFE252012F-3R3Mp3.3μH ±20% 1MHz 2500mA 1800mA 0.135Ω
DFE252012F-4R7Mp4.7μH ±20% 1MHz 2100mA 1500mA 0.190Ω
DFE252012F-6R8Mp6.8μH ±20% 1MHz 1700mA 1200mA 0.330Ω
DFE252012F-8R2Mp8.2μH ±20% 1MHz 1500mA 1100mA 0.410Ω
DFE252012F-100Mp10μH ±20% 1MHz 1400mA 950mA 0.480Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
0.1 1 10
10μH 8.2μH
6.8μH 4.7μH
2.2μH
3.3μH
1.5μH 1.0μH 0.82μH 0.68μH 0.47μH 0.33μH
0.1
100
10
1
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
8.2μH
6.8μH
4.7μH 3.3μH
2.2μH 1.5μH
1.0μH
0.82μH
0.68μH
0
2
0
4
6
8
10
12
0.47μH
0.33μH
12 14108642
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
10μH
0.33μH
0
10
20
30
40
50
0 8642
8.2μH
6.8μH
4.7μH
3.3μH
2.2μH
0.47μH
0.68μH
0.82μH
1.0μH
1.5μH
DFE252012P Series 1008 (2520) inch (mm)
(in mm)
2.5±0.2 2.0±0.2
1.2 max.
0.6±0.2 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE252012P-R33Mp0.33μH ±20% 1MHz 6600mA 4600mA 0.023Ω
DFE252012P-R47Mp0.47μH ±20% 1MHz 5700mA 4000mA 0.027Ω
DFE252012P-R68Mp0.68μH ±20% 1MHz 4800mA 3500mA 0.037Ω
DFE252012P-1R0Mp1.0μH ±20% 1MHz 4300mA 3200mA 0.042Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
27
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE252012P
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE252012P-1R5Mp1.5μH ±20% 1MHz 3500mA 2600mA 0.060Ω
DFE252012P-2R2Mp2.2μH ±20% 1MHz 3000mA 2200mA 0.084Ω
DFE252012P-3R3Mp3.3μH ±20% 1MHz 2300mA 1700mA 0.140Ω
DFE252012P-4R7Mp4.7μH ±20% 1MHz 2000mA 1400mA 0.200Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
4.7μH
1.0μH
3.3μH 2.2μH 1.5μH
0.1 1 10
0.68μH 0.47μH 0.33μH
0.1
100
10
1
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
4.7μH
3.3μH
2.2μH
1.5μH 1.0μH 0.68μH 0.47μH
0.33μH
0
2
4
6
8
10
0 12108
6
42
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
4.7μH
3.3μH
2.2μH
1.5μH
1.0μH
0.68μH
0.47μH
0.33μH
0
10
20
30
40
50
0 654
3
21
DFE252012R Series 1008 (2520) inch (mm)
(in mm)
2.5±0.2 2.0±0.2
1.2 max.
0.6±0.2 Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE252012R-H-1R0Mp1.0μH ±20% 1MHz 3400mA 3100mA 0.049Ω
DFE252012R-H-1R5Mp1.5μH ±20% 1MHz 2800mA 2500mA 0.065Ω
DFE252012R-H-2R2Mp2.2μH ±20% 1MHz 2400mA 2000mA 0.090Ω
DFE252012R-H-4R7Mp4.7μH ±20% 1MHz 1700mA 1400mA 0.216Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
28
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE252012R
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
Inductance (μH)
0.1 1.0 10.0
0.1
100.0
10.0
1.0
4.7μH
1.5μH
2.2μH
1.0μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
4.7μH
2.2μH
1.5μH
1.0μH
0
0.5
0 654321
5
1
1.5
2
2.5
3
3.5
4
4.5
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
4.7μH 1.0μH
0
10
0 54321
20
30
40
50
60
70
80
2.2μH
1.5μH
DFE322510C Series 1210 (3225) inch (mm)
(in mm)
1.0 max.
0.6±0.2
2.5±0.2
3.2±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
1276AS-H-R47Mp0.47μH ±20% 1MHz 3800mA 3300mA 0.038Ω
1276AS-H-R68Mp0.68μH ±20% 1MHz 3500mA 2900mA 0.045Ω
1276AS-H-1R0Mp1.0μH ±20% 1MHz 3100mA 2600mA 0.062Ω
1276AS-H-1R5Mp1.5μH ±20% 1MHz 2600mA 2100mA 0.087Ω
1276AS-H-2R2Mp2.2μH ±20% 1MHz 2200mA 1600mA 0.118Ω
1276AS-H-3R3Mp3.3μH ±20% 1MHz 1800mA 1400mA 0.190Ω
1276AS-H-4R7Mp4.7μH ±20% 1MHz 1600mA 1200mA 0.264Ω
1276AS-H-6R8Mp6.8μH ±20% 1MHz 1300mA 1000mA 0.378Ω
1276AS-H-100Mp10μH ±20% 1MHz 1000mA 800mA 0.588Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
Inductance (μH)
10μH
2.2μH
6.8μH 4.7μH 3.3μH
0.1
0.1
1.0 10.0
1.5μH
1.0μH
0.68μH 0.47μH
100.0
10.0
1.0
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
10μH
6.8μH
4.7μH
3.3μH
2.2μH
1.5μH 1.0μH
0.68μH
0.47μH
0
2
0.00 6.005.004.003.002.001.00
4
6
8
10
12
Temperature Rise Characteristics (Typ.)
DC Current (A)
0.47μH
ΔT (°C)
0
10
0 654321
100
20
30
40
50
60
70
80
90
10μH
6.8μH
4.7μH
3.3μH
2.2μH
0.68μH
1.0μH
1.5μH
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
29
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE322510C
DFE322512C Series 1210 (3225) inch (mm)
(in mm)
1.2 max.
0.6±0.2
2.5±0.2
3.2±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
1277AS-H-R47Mp0.47μH ±20% 1MHz 4700mA 3700mA 0.031Ω
1277AS-H-R68Mp0.68μH ±20% 1MHz 4200mA 3500mA 0.035Ω
1277AS-H-1R0Mp1.0μH ±20% 1MHz 3700mA 3100mA 0.045Ω
1277AS-H-1R5Mp1.5μH ±20% 1MHz 3000mA 2600mA 0.065Ω
1277AS-H-2R2Mp2.2μH ±20% 1MHz 2600mA 2100mA 0.084Ω
1277AS-H-3R3Mp3.3μH ±20% 1MHz 2100mA 1800mA 0.126Ω
1277AS-H-4R7Mp4.7μH ±20% 1MHz 1800mA 1400mA 0.180Ω
1277AS-H-6R8Mp6.8μH ±20% 1MHz 1500mA 1200mA 0.276Ω
1277AS-H-100Mp10μH ±20% 1MHz 1200mA 900mA 0.420Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 85°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
Inductance (μH)
10μH
1.5μH
6.8μH
4.7μH 3.3μH 2.2μH
0.10
0.1
1.00 10.00
1.0μH
0.68μH 0.47μH
100.0
10.0
1.0
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
4.7μH
6.8μH
3.3μH
2.2μH 1.5μH
1.0μH 0.68μH
0.47μH
0
2
0 8642
4
6
8
10
12
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
10μH
0.47μH
0
10
90
20
30
40
50
60
70
80
0 654321
6.8μH
4.7μH
3.3μH
2.2μH
0.68μH
1.0μH
1.5μH
DFE322512F Series 1210 (3225) inch (mm)
(in mm)
1.2 max.
0.6±0.2
2.5±0.2
3.2±0.2
Packaging
Code Packaging Minimum
Quantity
=P2 ø180mm Embossed Taping 3000
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
30
Inductors for Power LinesInductors for General CircuitsRF Inductors
DFE322512C
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
DFE322512F-R47Mp0.47μH ±20% 1MHz 6700mA 4800mA 0.023Ω
DFE322512F-R68Mp0.68μH ±20% 1MHz 6100mA 4400mA 0.026Ω
DFE322512F-1R0Mp1.0μH ±20% 1MHz 4800mA 3800mA 0.032Ω
DFE322512F-1R5Mp1.5μH ±20% 1MHz 3900mA 3000mA 0.048Ω
DFE322512F-2R2Mp2.2μH ±20% 1MHz 3400mA 2600mA 0.066Ω
DFE322512F-3R3Mp3.3μH ±20% 1MHz 2600mA 2000mA 0.108Ω
DFE322512F-4R7Mp4.7μH ±20% 1MHz 2300mA 1600mA 0.157Ω
DFE322512F-6R8Mp6.8μH ±20% 1MHz 2000mA 1200mA 0.220Ω
DFE322512F-100Mp10μH ±20% 1MHz 1700mA 1100mA 0.324Ω
Absolute maximum voltage: 20V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
10μH 6.8μH 4.7μH
3.3μH
1.5μH
2.2μH
0.1
0.1
100
110
1.0μH 0.68μH 0.47μH
10
1
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
10μH
6.8μH
4.7μH 3.3μH
2.2μH 1.5μH
1.0μH
0.68μH 0.47μH
0
2
1
4
6
8
3
5
7
9
10
0.0 12.010.08.0
6.0
4.02.0
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
10μH
0
20
40
60
80
100
120
140
0.
6.8μH
0.47μH
3.3μH
4.7μH
2.2μH
0.68μH
1.0μH
1.5μH
7654321
FDSD0412 Series 1515 (4040) inch (mm)
2.0
(2.2)
0.90 0.90
4.2 max.
4.2 max.
1.2 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 4000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDSD0412-H-R33Mp0.33μH ±20% 0.1MHz 7500mA 6400mA 0.019Ω
FDSD0412-H-R47Mp0.47μH ±20% 0.1MHz 6500mA 6000mA 0.023Ω
FDSD0412-H-1R0Mp1.0μH ±20% 0.1MHz 4700mA 4300mA 0.044Ω
FDSD0412-H-1R2Mp1.2μH ±20% 0.1MHz 4500mA 3700mA 0.048Ω
FDSD0412-H-1R5Mp1.5μH ±20% 0.1MHz 4100mA 3300mA 0.064Ω
FDSD0412-H-2R2Mp2.2μH ±20% 0.1MHz 3500mA 2800mA 0.084Ω
FDSD0412-H-3R3Mp3.3μH ±20% 0.1MHz 2800mA 2200mA 0.122Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
31
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDSD0412
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDSD0412-H-4R7Mp4.7μH ±20% 0.1MHz 2500mA 1900mA 0.161Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
1.2μH
4.7μH 3.3μH
2.2μH 1.5μH
0.1
0.1
110
1.0μH
0.47μH 0.33μH
100
10
1
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
4.7μH
2.2μH
3.3μH
1.5μH
1.2μH 1.0μH
0.47μH
0.33μH
0
2
0 108642
4
6
8
10
12
Temperature Rise Characteristics (Typ.)
DC Current (A)
0.33μH
0.47μH
Temperature Rise (°C)
4.7μH
0
20
0 108642
40
60
80
100
120
3.3μH
2.2μH
1.5μH
1.2μH 1.0μH
FDSD0415 Series 1515 (4040) inch (mm)
4.2 max.
4.2 max.
2.0
0.90
(2.2)
0.90
1.5 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 4000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDSD0415-H-R22Mp0.22μH ±20% 0.1MHz 12000mA 7700mA 0.014Ω
FDSD0415-H-R47Mp0.47μH ±20% 0.1MHz 9000mA 6100mA 0.018Ω
FDSD0415-H-1R0Mp1.0μH ±20% 0.1MHz 5300mA 4500mA 0.041Ω
FDSD0415-H-1R5Mp1.5μH ±20% 0.1MHz 5000mA 3700mA 0.047Ω
FDSD0415-H-2R2Mp2.2μH ±20% 0.1MHz 4100mA 3100mA 0.065Ω
FDSD0415-H-3R3Mp3.3μH ±20% 0.1MHz 3400mA 2600mA 0.095Ω
FDSD0415-H-4R7Mp4.7μH ±20% 0.1MHz 2900mA 2100mA 0.120Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
32
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDSD0415
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1 1 10
L (μH)
4.7μH
1.0μH 0.47μH 0.22μH
3.3μH 2.2μH 1.5μH
0.1
1
10
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
4.7μH
3.3μH
2.2μH
1.5μH
1.0μH
0.47μH 0.22μH
0
1.0
2.0
3.0
4.0
5.0
0.5
1.5
2.5
3.5
4.5
0 2015105
Temperature Rise Characteristics (Typ.)
DC Current (A)
Temperature rise (°C)
4.7μH
0
10
20
30
40
50
0 108624
3.3μH
2.2μH
1.5μH
0.22μH
0.47μH
1.0μH
FDSD0420 Series 1515 (4040) inch (mm)
4.2 max.
4.2 max.
2.0
0.90
(2.2)
0.90
2.0 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 2000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDSD0420-H-R33Mp0.33μH ±20% 0.1MHz 11000mA 7700mA 0.014Ω
FDSD0420-H-R47Mp0.47μH ±20% 0.1MHz 9400mA 6800mA 0.018Ω
FDSD0420-H-R68Mp0.68μH ±20% 0.1MHz 8300mA 6500mA 0.022Ω
FDSD0420-H-1R0Mp1.0μH ±20% 0.1MHz 6800mA 5100mA 0.029Ω
FDSD0420-H-1R5Mp1.5μH ±20% 0.1MHz 5700mA 4300mA 0.036Ω
FDSD0420-H-2R2Mp2.2μH ±20% 0.1MHz 4100mA 3600mA 0.047Ω
FDSD0420-H-3R3Mp3.3μH ±20% 0.1MHz 3700mA 2900mA 0.071Ω
FDSD0420-H-4R7Mp4.7μH ±20% 0.1MHz 3600mA 2700mA 0.083Ω
FDSD0420-H-6R8Mp6.8μH ±20% 0.1MHz 2700mA 1900mA 0.150Ω
FDSD0420-H-100Mp10μH ±20% 0.1MHz 2500mA 1700mA 0.200Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.01
1
0.1
10
110
L (μH)
10μH
1.5μH
6.8μH 4.7μH 3.3μH 2.2μH
1.0μH 0.68μH 0.47μH 0.33μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
6.8μH
4.7μH
3.3μH
2.2μH
1.5μH
1.0μH
0.68μH 0.47μH
0.33μH
0
2
0 108642
4
6
8
10
12
Temperature Rise Characteristics (Typ.)
DC Current (A)
10μH
Temperature Rise (°C)
0
20
0 108642
40
60
80
100
120
6.8μH
4.7μH
3.3μH
2.2μH
1.5μH
0.33μH
0.47μH
0.68μH
1.0μH
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
33
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDSD0420
FDSD0420W Series 1515 (4040) inch (mm)
4.2 max.
4.2 max.
2.0
0.90
(2.2)
0.90
2.0 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 2000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDSD0420W-H-150Mp15μH ±20% 0.1MHz 1900mA 1100mA 0.35Ω
FDSD0420W-H-220Mp22μH ±20% 0.1MHz 1500mA 820mA 0.54Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
0
0 0.5 1 1.5 2 2.5
22μH
15μH
3
5
10
15
20
25
Temperature Rise Characteristics (Typ.)
ΔT (°C)
DC Current (A)
0
10
20
30
40
50
22μH
15μH
0 0.3 0.6 0.9 1.2 1.5
FDSD0512 Series 2019 (5249) inch (mm)
4.9
2.5
1.35 5.2
(2.5)
1.35
1.2 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 4000
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
34
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDSD0420W
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDSD0512-H-1R0Mp1.0μH ±20% 0.1MHz 6100mA 4000mA 0.044Ω
FDSD0512-H-K2R2Mp2.2μH ±20% 0.1MHz 4200mA 3200mA 0.068Ω
FDSD0512-H-4R7Mp4.7μH ±20% 0.1MHz 3000mA 2000mA 0.180Ω
FDSD0512-H-6R8Mp6.8μH ±20% 0.1MHz 2300mA 1700mA 0.210Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
110
Inductance (μH)
6.8μH
2.2μH
4.7μH
1.0μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
6.8μH
Inductance (μH)
4.7μH
2.2μH
1.0μH
0
1
2
3
4
5
6
7
0 8642
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
6.8μH
0
10
20
30
40
50
0 654
3
21
4.7μH
1.0μH
2.2μH
FDSD0515 Series 2019 (5249) inch (mm)
4.9
2.5
1.35 5.2
(2.5)
1.35
1.5 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 4000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDSD0515-H-1R0Mp1.0μH ±20% 0.1MHz 7000mA 5200mA 0.030Ω
FDSD0515-H-2R2Mp2.2μH ±20% 0.1MHz 4800mA 3400mA 0.059Ω
FDSD0515-H-3R3Mp3.3μH ±20% 0.1MHz 3800mA 3000mA 0.075Ω
FDSD0515-H-4R7Mp4.7μH ±20% 0.1MHz 3200mA 2600mA 0.100Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
35
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDSD0515
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
10
110
Inductance (μH)
4.7μH
2.2μH 1.0μH
3.3μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
4.7μH
Inductance (μH)
3.3μH
2.2μH
1.0μH
0
1
0 108642
2
3
4
5
6
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
4.7μH
0
10
20
30
40
50
0 7531
3.3μH
2.2μH
1.0μH
FDSD0518 Series 2019 (5249) inch (mm)
4.9
2.5
1.35 5.2
(2.5)
1.35
1.8 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 2000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDSD0518-H-R68Mp0.68μH ±20% 0.1MHz 9000mA 6800mA 0.019Ω
FDSD0518-H-1R0Mp1.0μH ±20% 0.1MHz 8700mA 6100mA 0.021Ω
FDSD0518-H-1R5Mp1.5μH ±20% 0.1MHz 6700mA 5300mA 0.029Ω
FDSD0518-H-2R2Mp2.2μH ±20% 0.1MHz 5400mA 4300mA 0.040Ω
FDSD0518-H-3R3Mp3.3μH ±20% 0.1MHz 4600mA 3400mA 0.058Ω
FDSD0518-H-4R7Mp4.7μH ±20% 0.1MHz 3900mA 3000mA 0.073Ω
FDSD0518-H-6R8Mp6.8μH ±20% 0.1MHz 2900mA 2600mA 0.106Ω
FDSD0518-H-100Mp10μH ±20% 0.1MHz 2700mA 2400mA 0.150Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
10μH
2.2μH 1.5μH 1.0μH 0.68μH
6.8μH 4.7μH 3.3μH
0.1
0.1
110
100
10
1
Inductance-Current Characteristics (Typ.)
DC Current (A)
10μH
Inductance (μH)
6.8μH
4.7μH
3.3μH
2.2μH
1.5μH 1.0μH
0.68μH
0
2
0 12108642
4
6
8
10
12
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
10μH
0
10
20
30
40
50
0 108624
6.8μH
4.7μH
3.3μH
2.2μH
0.68μH
1.0μH
1.5μH
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
36
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDSD0518
FDV0530S Series 2020 (5050) inch (mm)
(
Tolerance: ±0.3
in mm
)
5.0
5.0
3.0 max.
(2.8)1.1 1.1
2.5
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 2000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDV0530S-H-R12Mp0.12μH ±20% 0.1MHz 18000mA 13000mA 0.0039Ω
FDV0530S-H-R24Mp0.24μH ±20% 0.1MHz 13000mA 11000mA 0.0056Ω
FDV0530S-H-R42Mp0.42μH ±20% 0.1MHz 9000mA 8200mA 0.0098Ω
FDV0530S-H-R60Mp0.60μH ±20% 0.1MHz 7900mA 7200mA 0.012Ω
FDV0530S-H-R78Mp0.78μH ±20% 0.1MHz 7100mA 6900mA 0.014Ω
FDV0530S-H-1R0Mp1.0μH ±20% 0.1MHz 6200mA 5700mA 0.017Ω
FDV0530S-H-1R5Mp1.5μH ±20% 0.1MHz 5400mA 4900mA 0.024Ω
FDV0530S-H-2R2Mp2.2μH ±20% 0.1MHz 4500mA 4300mA 0.034Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
FDV0530 Series 2423 (6258) inch (mm)
6.2
3.0 max.
2.8
1.2
1.2 (3.8)
5.8
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
37
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDV0530S
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDV0530-H-R11Mp0.11μH ±20% 0.1MHz 19600mA 18200mA 0.0016Ω
FDV0530-H-R20Mp0.2μH ±20% 0.1MHz 17500mA 17700mA 0.0024Ω
FDV0530-H-R36Mp0.36μH ±20% 0.1MHz 12600mA 13900mA 0.0041Ω
FDV0530-H-R56Mp0.56μH ±20% 0.1MHz 11300mA 11100mA 0.0063Ω
FDV0530-H-R75Mp0.75μH ±20% 0.1MHz 9900mA 9700mA 0.0076Ω
FDV0530-H-1R0Mp1.0μH ±20% 0.1MHz 8400mA 7700mA 0.0112Ω
FDV0530-H-1R5Mp1.5μH ±20% 0.1MHz 5700mA 6600mA 0.0155Ω
FDV0530-H-2R2Mp2.2μH ±20% 0.1MHz 5300mA 6000mA 0.0199Ω
FDV0530-H-3R3Mp3.3μH ±20% 0.1MHz 4100mA 4500mA 0.0341Ω
FDV0530-H-4R7Mp4.7μH ±20% 0.1MHz 3500mA 3600mA 0.0536Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
0
1.0
2.0
3.0
4.0
5.0
0 5 10 15 20 25 30
0.11μH
0.20μH
0.36μH
0.56μH
0.75μH
1.0μH
1.5μH
2.2μH
3.3μH
4.7μH
Temperature Rise Characteristics (Typ.)
DC Current (A)
Temperature Rise (°C)
4.7μH
3.3μH
2.2μH
0.11μH
0.20μH
0.36μH
0.56μH
0.75μH
1.5μH
1.0μH
0
10
20
30
40
50
0 302520
15
105
FCUL0530 Series 2522 (6357) inch (mm)
6.3
5.8±0.2
5.7±0.2
3.0 max.
1.3 (3.7) 1.3
1.4
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance
FCUL0530-R36Mp0.36μH ±20% 0.1MHz 17000mA 18000mA 0.00240Ω±7%
FCUL0530-R47Mp0.47μH ±20% 0.1MHz 14000mA 16000mA 0.00285Ω±7%
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
38
Inductors for Power LinesInductors for General CircuitsRF Inductors
FCUL0530
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
Inductance (μH)
0.47μH
0.36μH
101100
Inductance-Current Characteristics (Typ.)
DC Current (A)
0.47μH
Inductance (μH)
0.36μH
0
0.05
00
0. 5
0.1
0.15
0.2
0.25
0.3
0.35
0.4
0.45
50403010 20
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
0.47μH
0.36μH
0
10
20
30
40
50
60
70
0 302010
FDSD0630 Series 2726 (7066) inch (mm)
3.2
1.5 7.0
1.5
6.6
(4.0)
3.0 max.
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDSD0630-H-R68Mp0.68μH ±20% 0.1MHz 17000mA 9600mA 0.0086Ω
FDSD0630-H-1R0Mp1.0μH ±20% 0.1MHz 15000mA 9400mA 0.0110Ω
FDSD0630-H-1R5Np1.5μH ±30% 0.1MHz 13000mA 8500mA 0.0130Ω
FDSD0630-H-2R2Mp2.2μH ±20% 0.1MHz 12000mA 7100mA 0.0170Ω
FDSD0630-H-3R3Mp3.3μH ±20% 0.1MHz 8000mA 5600mA 0.0280Ω
FDSD0630-H-4R7Mp4.7μH ±20% 0.1MHz 7600mA 4700mA 0.0400Ω
FDSD0630-H-5R6Mp5.6μH ±20% 0.1MHz 7000mA 4200mA 0.0460Ω
FDSD0630-H-6R8Mp6.8μH ±20% 0.1MHz 5900mA 3700mA 0.0610Ω
FDSD0630-H-8R2Mp8.2μH ±20% 0.1MHz 5500mA 3400mA 0.0700Ω
FDSD0630-H-100Mp10μH ±20% 0.1MHz 5400mA 3200mA 0.0740Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
L (μH)
10μH
3.3μH 2.2μH 1.5μH 1.0μH 0.68μH
8.2μH 6.8μH 5.6μH 4.7μH
0.1
0.1
10
1
100
110
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
10μH
8.2μH
6.8μH
5.6μH
4.7μH
3.3μH 2.2μH
1.5μH
1.0μH
0.68μH
0
1
0 2015105
10
2
3
4
5
6
7
8
9
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
10μH
0
10
20
30
40
50
0 1412108642
8.2μH
6.8μH
5.6μH
4.7μH
0.68μH
1.0μH
1.5μH
2.2μH
3.3μH
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
39
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDSD0630
FCUL0624 Series 2926 (7366) inch (mm)
2.4 max.
1.5 (4.3) 1.5
1.4
7.3
6.6
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1500
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance
FCUL0624-H-R22Mp0.22μH ±20% 0.1MHz 23000mA 24000mA 0.00140Ω±7%
FCUL0624-H-R47Mp0.47μH ±20% 0.1MHz 17000mA 16000mA 0.00327Ω±7%
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
0.1
1
110
Inductance (μH)
0.47μH
0.22μH
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
0.47μH
0.22μH
0
0.1
0.2
0.3
0.4
0.5
0.6
0 50403010 20
Temperature Rise Characteristics (Typ.)
DC Current (A)
0.22μH
0.47μH
ΔT (°C)
0
10
0 40302010
90
20
30
40
50
60
70
80
FCUL0630 Series 2926 (7366) inch (mm)
3.0 max.
1.5 (4.3) 1.5
1.4
7.3
6.6
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
40
Inductors for Power LinesInductors for General CircuitsRF Inductors
FCUL0624
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance
FCUL0630-H-R12Mp0.12μH ±20% 0.1MHz 30000mA 32000mA 0.00077Ω±7%
FCUL0630-H-R22Mp0.22μH ±20% 0.1MHz 25000mA 26000mA 0.00112Ω±7%
FCUL0630-H-R36Mp0.36μH ±20% 0.1MHz 18000mA 21000mA 0.00190Ω±7%
FCUL0630-H-R47Mp0.47μH ±20% 0.1MHz 18000mA 18000mA 0.00248Ω±7%
FCUL0630-H-R56Mp0.56μH ±20% 0.1MHz 14000mA 17000mA 0.00283Ω±7%
FCUL0630-H-R68Mp0.68μH ±20% 0.1MHz 14000mA 15000mA 0.00358Ω±7%
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
Inductance (μH)
0.68μH
0.56μH 0.47μH
0.22μH
0.36μH
0.12μH
0.1
0.1
1
110
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
0.68μH
0.56μH
0.47μH
0.36μH
0.22μH
0.12μH
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 50403010 20
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
0.68μH
0
10
90
20
30
40
50
60
70
80
0 604020
0.56μH
0.47μH
0.36μH
0.12μH
0.22μH
FDV0618 Series 2926 (7467) inch (mm)
(
Tolerance: ±0.3
in mm
)
6.7
7.4
1.4 (4.6) 1.4
1.8 max.
3.2
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1500
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDV0618-H-R24Np0.24μH ±30% 0.1MHz 14000mA 13000mA 0.0045Ω
FDV0618-H-R35Np0.35μH ±30% 0.1MHz 11000mA 10000mA 0.0068Ω
FDV0618-H-R68Mp0.68μH ±20% 0.1MHz 9800mA 8700mA 0.0100Ω
FDV0618-H-1R0Mp1.0μH ±20% 0.1MHz 7100mA 5400mA 0.0170Ω
FDV0618-H-1R5Np1.5μH ±30% 0.1MHz 6000mA 4800mA 0.0270Ω
FDV0618-H-2R2Mp2.2μH ±20% 0.1MHz 5300mA 4400mA 0.0340Ω
FDV0618-H-3R3Mp3.3μH ±20% 0.1MHz 4100mA 3200mA 0.0480Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
41
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDV0618
Continued from the preceding page.
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0 5 10 15 20 25 30
0.24μH
0.35μH
0.68μH
Temperature Rise Characteristics (Typ.)
Temperature Rise (°C)
DC Current (A)
0
10
20
30
40
50
60
048121620
0.24μH
0.35μH
0.68μH
FDV0620 Series 2926 (7467) inch (mm)
(
Tolerance: ±0.3
in mm
)(
Tolerance: ±0.3
in mm
)
6.7
7.4
1.4 (4.6) 1.4
2.0 max.
3.2
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1500
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDV0620-H-R20Mp0.2μH ±20% 0.1MHz 16200mA 12400mA 0.0045Ω
FDV0620-H-R47Mp0.47μH ±20% 0.1MHz 11000mA 9000mA 0.0083Ω
FDV0620-H-R68Mp0.68μH ±20% 0.1MHz 10000mA 7700mA 0.0100Ω
FDV0620-H-1R0Mp1.0μH ±20% 0.1MHz 7700mA 5700mA 0.0180Ω
FDV0620-H-1R5Mp1.5μH ±20% 0.1MHz 6000mA 5000mA 0.0260Ω
FDV0620-H-2R2Mp2.2μH ±20% 0.1MHz 5100mA 4000mA 0.0370Ω
FDV0620-H-3R3Mp3.3μH ±20% 0.1MHz 4200mA 3200mA 0.0510Ω
FDV0620-H-4R7Mp4.7μH ±20% 0.1MHz 3500mA 2800mA 0.0680Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
0
1.0
2.0
3.0
4.0
5.0
02 8 14410166121820
4.7μH
3.3μH
2.2μH
1.5μH 1.0μH 0.68μH
0.47μH
0.2μH
Temperature Rise Characteristics (Typ.)
Temperature Rise (°C)
0
10
20
30
40
50
60
DC Current (A)
0 5 10 15 20
0.2μH
0.47μH
0.68μH
1.0μH
1.5μH
2.2μH
3.3μH
4.7μH
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
42
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDV0620
FDVE0630 Series 2926 (7467) inch (mm)
(
Tolerance: ±0.3
in mm
)
3.0 max.
6.7
7.4
1.4 (4.6) 1.4
3.2
3.7
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDVE0630-H-R16Mp0.16μH ±20% 0.1MHz 19400mA 20700mA 0.0016Ω
FDVE0630-H-R33Mp0.33μH ±20% 0.1MHz 15900mA 16900mA 0.0027Ω
FDVE0630-H-R47Mp0.47μH ±20% 0.1MHz 15600mA 14100mA 0.0037Ω
FDVE0630-H-R68Mp0.68μH ±20% 0.1MHz 10400mA 11900mA 0.0060Ω
FDVE0630-H-R75Mp0.75μH ±20% 0.1MHz 10900mA 10700mA 0.0062Ω
FDVE0630-H-1R0Mp1.0μH ±20% 0.1MHz 9500mA 9500mA 0.0085Ω
FDVE0630-H-1R5Mp1.5μH ±20% 0.1MHz 8100mA 8000mA 0.0121Ω
FDVE0630-H-2R2Mp2.2μH ±20% 0.1MHz 6900mA 6600mA 0.0162Ω
FDVE0630-H-3R3Mp3.3μH ±20% 0.1MHz 5300mA 5300mA 0.0254Ω
FDVE0630-H-4R7Mp4.7μH ±20% 0.1MHz 4600mA 4400mA 0.0361Ω
FDVE0630-H-6R8Mp6.8μH ±20% 0.1MHz 3400mA 3600mA 0.0542Ω
FDVE0630-H-100Mp10μH ±20% 0.1MHz 3100mA 2800mA 0.0792Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
0
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
11.0
0102030
0.47μH
0.33μH
0.16μH
10μH
0.75μH
0.68μH
1.0μH
1.5μH
2.2μH
3.3μH
4.7μH
6.8μH
Temperature Rise Characteristics (Typ.)
DC Current (A)
Temperature Rise (°C)
10μH
6.8μH
4.7μH
3.3μH
2.2μH
1.5μH 1.0μH
0.75μH
0.68μH
0.47μH
0.33μH
0.16μH
0
10
20
30
40
50
0 252015510
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
43
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDVE0630
FDVE0640 Series 2926 (7467) inch (mm)
(
Tolerance: ±0.3
in mm
)
4.0 max.
6.7
7.4
1.4 (4.6) 1.4
3.2
3.7
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDVE0640-H-1R5Mp1.5μH ±20% 0.1MHz 8000mA 8200mA 0.0103Ω
FDVE0640-H-2R2Mp2.2μH ±20% 0.1MHz 7600mA 6500mA 0.0163Ω
FDVE0640-H-3R3Mp3.3μH ±20% 0.1MHz 6000mA 5600mA 0.0192Ω
FDVE0640-H-4R7Mp4.7μH ±20% 0.1MHz 4600mA 5000mA 0.0292Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
FDUE0630 Series 3026 (7667) inch (mm)
7.6
6.9
(4.6)
6.7
1.5 1.5
3.0max.
2.0
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
44
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDVE0640
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance
FDUE0630-H-R12Mp0.12μH ±20% 0.1MHz 33000mA 36000mA 0.00058Ω±7%
FDUE0630-H-R24Mp0.24μH ±20% 0.1MHz 23000mA 27000mA 0.00112Ω±7%
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
FDUE0640 Series 3026 (7667) inch (mm)
7.6
4 max.
(4.6)
6.7
1.5 1.5
2.0
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance
FDUE0640-H-KR15Mp0.15μH ±20% 0.1MHz 25000mA 33000mA 0.00061Ω±7%
FDUE0640-H-R24Mp0.24μH ±20% 0.1MHz 19000mA 27000mA 0.00089Ω±7%
FDUE0640-H-R42Mp0.42μH ±20% 0.1MHz 15000mA 22000mA 0.00148Ω±7%
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Current Characteristics (Typ.)
Inductance (μH)
100 30
20 40
DC Current (A)
0.4
0.5
0.3
0.2
0.1
0
0.15μH
0.24μH
0.42μH
Temperature Rise Characteristics (Typ.)
Temperature Rise (°C)
DC Current (A)
0
10
20
30
40
50
60
010203040
50
0.42μH
0.24μH
0.15μH
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
45
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDUE0640
FDUE0650 Series 3026 (7667) inch (mm)
7.6
5.0 max.
(4.6)
6.7
1.5 1.5
A
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 1000
Part Number
(p: packaging code) Terminal Dimensions
FDUE0650-H-R60Mp
A:2.7mm
FDUE0650-H-1R0MpA:2.4mm
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance
FDUE0650-H-R60Mp0.6μH ±20% 0.1MHz 12000mA 18000mA 0.00224Ω±10%
FDUE0650-H-1R0Mp1.0μH ±20% 0.1MHz 9800mA 16000mA 0.00338Ω±10%
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Current Characteristics (Typ.)
1.2
1.0
0.8
0.6
0.4
0.2
0
048
12 16 20 24 28
1.0μH
0.6μH
Inductance (μH)
DC Current (A)
Temperature Rise Characteristics (Typ.)
DC Current (A)
04812 16 20 24
Temperature Rise (°C)
0
10
20
30
40
50
0.6μH
1.0μH
FDA1055 Series 4242 (108108) inch (mm)
10.8
A
5.5 max.
2.5
C
B
1.5
1.5
(8.25)
10.8
(
Tolerance: ±0.3
in mm
)
(1) (1) Dummy electrode
terminal:
Please solder to
an isolated pad.
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Part Number
(p: packaging code) Terminal Dimensions
FDA1055-H-R56Mp
A:11.6mm B:1.9mm C:6.5mm
FDA1055-H-1R2MpA:11.6mm B:1.9mm C:6.5mm
FDA1055-H-1R5MpA:11.6mm B:1.9mm C:6.5mm
FDA1055-H-2R2MpA:11.4mm B:1.7mm C:6.4mm
FDA1055-H-3R3MpA:11.3mm B:1.4mm C:6.4mm
FDA1055-H-4R7MpA:11.3mm B:1.4mm C:6.4mm
FDA1055-H-5R6MpA:11.3mm B:1.4mm C:6.4mm
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
46
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDUE0650
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDA1055-H-R56Mp0.56μH ±20% 0.1MHz 27700mA 22700mA 0.0018Ω
FDA1055-H-1R2Mp1.2μH ±20% 0.1MHz 20000mA 17900mA 0.0029Ω
FDA1055-H-1R5Mp1.5μH ±20% 0.1MHz 18000mA 16600mA 0.0035Ω
FDA1055-H-2R2Mp2.2μH ±20% 0.1MHz 15500mA 13600mA 0.0048Ω
FDA1055-H-3R3Mp3.3μH ±20% 0.1MHz 11700mA 11200mA 0.0073Ω
FDA1055-H-4R7Mp4.7μH ±20% 0.1MHz 9900mA 9100mA 0.0110Ω
FDA1055-H-5R6Mp5.6μH ±20% 0.1MHz 8000mA 7500mA 0.0120Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
5.6μH
1.5μH
Inductance (μH)
4.7μH
3.3μH
2.2μH
0.1
10
1
100
0.1
1.2μH
0.56μH
101100
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
0.56μH
1.2μH
1.5μH
2.2μH
3.3μH
4.7μH
5.6μH
0
1
2
3
4
5
6
7
0 30252015105
Temperature Rise Characteristics (Typ.)
DC Current (A)
1.2μH
Temperature Rise (°C)
5.6μH
0
50
100
150
200
250
0 302520
15
105
4.7μH 3.3μH
2.2μH
1.5μH
0.56μH
FDUE1040D Series 4440 (112100) inch (mm)
11.2
4.0 max.
2.2
(6.8)
2.2
10.0
2.7±0.5
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance
FDUE1040D-H-R22Mp0.22μH ±20% 0.1MHz 32000mA 32000mA 0.00064Ω±7%
FDUE1040D-H-R36Mp0.36μH ±20% 0.1MHz 25000mA 30000mA 0.00079Ω±7%
FDUE1040D-H-R45Mp0.45μH ±20% 0.1MHz 24000mA 27000mA 0.00102Ω±7%
FDUE1040D-H-R56Mp0.56μH ±20% 0.1MHz 24000mA 25000mA 0.00124Ω±7%
FDUE1040D-H-1R0Mp1.0μH ±20% 0.1MHz 16000mA 18000mA 0.00235Ω±7%
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
47
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDUE1040D
Continued from the preceding page.
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
0
0.2
0.4
0.6
0.8
1.0
1.2
010203040
1.0μH
0.36μH
0.45μH
0.56μH
0.22μH
Temperature Rise Characteristics (Typ.)
DC Current (A)
1.0μH 0.45μH
0.36μH
0.22μH
Temperature Rise (°C)
0
10
20
30
40
50
0 403010 20
0.56μH
FDVE1040 Series 4440 (112100) inch (mm)
10.0
11.2
(
Tolerance: ±0.3
in mm
)
4.0 max.
2.1
2.1
3.0
(7.0)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDVE1040-H-1R5Mp1.5μH ±20% 0.1MHz 13700mA 14600mA 0.0046Ω
FDVE1040-H-2R2Mp2.2μH ±20% 0.1MHz 11400mA 11600mA 0.0068Ω
FDVE1040-H-2R7Mp2.7μH ±20% 0.1MHz 10900mA 10500mA 0.0088Ω
FDVE1040-H-3R3Mp3.3μH ±20% 0.1MHz 9800mA 9000mA 0.0101Ω
FDVE1040-H-4R7Mp4.7μH ±20% 0.1MHz 8200mA 8000mA 0.0138Ω
FDVE1040-H-5R6Mp5.6μH ±20% 0.1MHz 7900mA 7300mA 0.0180Ω
FDVE1040-H-6R8Mp6.8μH ±20% 0.1MHz 7100mA 7100mA 0.0202Ω
FDVE1040-H-100Mp10μH ±20% 0.1MHz 6100mA 5200mA 0.0341Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
1.5μH
2.2μH
2.7μH
3.3μH
4.7μH
5.6μH
6.8μH
10μH
0
2.0
4.0
6.0
8.0
10.0
12.0
010
20 30 40
Temperature Rise Characteristics (Typ.)
DC Current (A)
Temperature Rise (°C)
10μH
1.5μH
2.2μH
2.7μH
3.3μH
6.8μH
5.6μH
4.7μH
0
10
20
30
40
50
0 2015105
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
48
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDVE1040
FCUL1040 Series 4540 (115100) inch (mm)
4.0 max.
2.35
2.35
10.0
11.5
(6.8)
A ±0.5
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Part Number
(p: packaging code) Terminal Dimensions
FCUL1040-H-R18Mp
A:3.9mm
FCUL1040-H-R36MpA:3.9mm
FCUL1040-H-R42MpA:3.5mm
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance
FCUL1040-H-R18Mp0.18μH ±20% 0.1MHz 53000mA 38000mA 0.00054Ω±7%
FCUL1040-H-R36Mp0.36μH ±20% 0.1MHz 36000mA 31000mA 0.00082Ω±7%
FCUL1040-H-R42Mp0.42μH ±20% 0.1MHz 34000mA 30000mA 0.00102Ω±7%
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
Inductance (μH)
0.36μH
0.18μH
0.42μH
0.1
0.1
1
101100
Inductance-Current Characteristics (Typ.)
DC Current (A)
Inductance (μH)
0.42μH
0.36μH
0.18μH
0
0.05
0
0.45
0.1
0.15
0.2
0.25
0.3
0.35
0.4
100806020 40
Temperature Rise Characteristics (Typ.)
DC Current (A)
ΔT (°C)
0.42μH
0
10
20
30
40
50
60
70
0 604020
0.36μH
0.18μH
FCUL1060 Series 4640 (116100) inch (mm)
6.0 max.
2.4 2.4
(6.8)
3.9±0.5
10.0
11.6
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
49
Inductors for Power LinesInductors for General CircuitsRF Inductors
FCUL1040
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance
FCUL1060-H-R36Mp0.36μH ±20% 0.1MHz 41000mA 41000mA 0.00053Ω±7%
FCUL1060-H-R56Mp0.56μH ±20% 0.1MHz 34000mA 30000mA 0.00085Ω±7%
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
1
10
Inductance (μH)
0.56μH
0.36μH
0.1 101100
Inductance-Current Characteristics (Typ.)
DC Current (A)
0.56μH
Inductance (μH)
0.36μH
0
0.1
0 80604020
0.2
0.3
0.4
0.5
0.6
Temperature Rise Characteristics (Typ.)
DC Current (A)
0.36μH
Temperature rise (°C)
0.56μH
0
10
060705040302010
20
30
40
50
60
70
80
FDUE1245 Series 4848 (123121) inch (mm)
A
12.1
3±0.5
4.5 max.
12.3
B(9.0) B
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Part Number
(p: packaging code) Terminal Dimensions
FDUE1245-H-R50Mp
A:13.4mm B:2.2mm
FDUE1245-H-R72MpA:13.4mm B:2.2mm
FDUE1245-H-1R0MpA:13.2mm B:2.1mm
FDUE1245-H-1R5MpA:13.2mm B:2.1mm
FDUE1245-H-2R2MpA:13.2mm B:2.1mm
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance
FDUE1245-H-R50Mp0.5μH ±20% 0.1MHz 28000mA 30000mA 0.0008Ω±7%
FDUE1245-H-R72Mp0.72μH ±20% 0.1MHz 24000mA 22000mA 0.00163Ω±7%
FDUE1245-H-1R0Mp1.0μH ±20% 0.1MHz 21000mA 21000mA 0.0017Ω±7%
FDUE1245-H-1R5Mp1.5μH ±20% 0.1MHz 17000mA 20000mA 0.00226Ω±7%
FDUE1245-H-2R2Mp2.2μH ±20% 0.1MHz 14000mA 17000mA 0.0034Ω±7%
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 20%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
50
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDUE1245
Continued from the preceding page.
Inductance-Current Characteristics (Typ.)
Inductance (μH)
DC Current (A)
0
0.5
1.0
1.5
2.0
2.5
3.0
0 5 10 15 20 25 30 35 40 45
2.2μH
1.5μH
0.5μH
1.0μH
Temperature Rise Characteristics (Typ.)
DC Current (A)
Temperature Rise (°C)
0
10
20
30
40
50
0 4530 35 40252015105
0.5μH
2.2μH
1.5μH
1.0μH
FDA1254 Series 5049 (126125) inch (mm)
1.5
B
1.8
1.8
(10.2)
5.4 max.
2.5
C
(
Tolerance: ±0.3
in mm
)
12.6
A
12.5
(1) (1) Dummy electrode
terminal:
Please solder to
an isolated pad.
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Part Number
(p: packaging code) Terminal Dimensions
FDA1254-H-R68Mp
A:13.5mm B:1.8mm C:7.7mm
FDA1254-H-1R0MpA:13.5mm B:1.8mm C:7.7mm
FDA1254-H-1R2MpA:13.5mm B:1.8mm C:7.7mm
FDA1254-H-2R2MpA:13.2mm B:1.5mm C:7.6mm
FDA1254-H-3R3MpA:12.9mm B:1.2mm C:7.6mm
FDA1254-H-4R7MpA:12.9mm B:1.2mm C:7.6mm
FDA1254-H-5R6MpA:12.9mm B:1.2mm C:7.6mm
FDA1254-H-8R0MpA:12.9mm B:1.2mm C:7.6mm
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* Max. of DC Resistance
FDA1254-H-R68Mp0.68μH ±20% 0.1MHz 29100mA 23700mA 0.0015Ω
FDA1254-H-1R0Mp1.0μH ±20% 0.1MHz 25200mA 20500mA 0.0020Ω
FDA1254-H-1R2Mp1.2μH ±20% 0.1MHz 20200mA 18400mA 0.0026Ω
FDA1254-H-2R2Mp2.2μH ±20% 0.1MHz 14700mA 14200mA 0.0045Ω
FDA1254-H-3R3Mp3.3μH ±20% 0.1MHz 13100mA 11500mA 0.0070Ω
FDA1254-H-4R7Mp4.7μH ±20% 0.1MHz 11200mA 10200mA 0.0088Ω
FDA1254-H-5R6Mp5.6μH ±20% 0.1MHz 10800mA 9100mA 0.0094Ω
FDA1254-H-8R0Mp8.0μH ±20% 0.1MHz 9100mA 7100mA 0.0160Ω
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Current Characteristics (Typ.)
DC Current (A)
0
0
2
4
6
8
10
0.68μH
1.0μH
1.2μH
2.2μH
3.3μH
4.7μH
5.6μH
8.0μH
5 10152025303540
Inductance (μH)
Temperature Rise Characteristics (Typ.)
Temperature Rise (°C)
DC Current (A)
0 10203040
0
70
60
50
40
30
20
10
1.2μH
0.68μH
5.6μH
1.0μH
4.7μH
3.3μH
2.2μH
8.0μH
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
51
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDA1254
FDUE1260 Series 5650 (143127) inch (mm)
12.7
6.0 max.
14.3 max.
3.0±0.5
3.3 (7.5) 3.3
(
Tolerance: ±0.3
in mm
)
Packaging
Code Packaging Minimum
Quantity
=P3 ø330mm Embossed Taping 500
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance
FDUE1260-H-R45Np0.45μH ±30% 0.1MHz 32000mA 34000mA 0.00058Ω±7%
Absolute maximum voltage: 30V DC
Operating temp. range (Self-temp. rise included): -40 to 125°C
Class of Magnetic Shield: Metal Alloy
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
Rated current (Isat) is specified when the decrease of the initial inductance value at 30%. Rated current (Itemp) is specified when temperature of the inductor is raised 40°C by DC current.
Inductance-Frequency Characteristics (Typ.)
Frequency (MHz)
0.1
1
10
Inductance (μH)
0.1 101100
Inductance-Current Characteristics (Typ.)
0.0
0.1
0 605040302010
0.2
0.3
0.4
0.5
0.6
Inductance (μH)
DC Current (A)
Temperature Rise Characteristics (Typ.)
0
10
0 605040302010
20
30
40
50
60
DC Current (A)
ΔT (°C)
LQW15DN_00 Series 0402 (1005) inch (mm)
(in mm)
0.65±0.11.10±0.1
0.6±0.1
0.3±0.1
0.3±0.15
Packaging
Code Packaging Minimum
Quantity
Dø180mm Paper Taping 8000
BPacking in Bulk 500
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
52
Inductors for Power LinesInductors for General CircuitsRF Inductors
FDUE1260
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQW15DN100M00p10μH ±20% 10MHz 120mA 120mA 4.7Ω±15% 20MHz
LQW15DN150M00p15μH ±20% 10MHz 100mA 100mA 5.7Ω±15% 20MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: Magnetic Resin
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max.
Inductance-Frequency Characteristics (Typ.) Impedance-Frequency Characteristics (Typ.)
LQH2MCN_02 Series 0806 (2016) inch (mm)
(in mm)
2.0±0.2
0.6±0.2 0.6±0.2
1.6±0.2
0.90±0.05
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 100
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH2MCN1R0M02p1.0μH ±20% 1MHz 485mA 0.30Ω±30% 100MHz
LQH2MCN1R5M02p1.5μH ±20% 1MHz 445mA 0.40Ω±30% 95MHz
LQH2MCN2R2M02p2.2μH ±20% 1MHz 425mA 0.48Ω±30% 70MHz
LQH2MCN3R3M02p3.3μH ±20% 1MHz 375mA 0.60Ω±30% 65MHz
LQH2MCN4R7M02p4.7μH ±20% 1MHz 300mA 0.8Ω±30% 60MHz
LQH2MCN5R6M02p5.6μH ±20% 1MHz 280mA 0.9Ω±30% 60MHz
LQH2MCN6R8M02p6.8μH ±20% 1MHz 255mA 1.0Ω±30% 55MHz
LQH2MCN8R2M02p8.2μH ±20% 1MHz 235mA 1.1Ω±30% 50MHz
LQH2MCN100K02p10μH ±10% 1MHz 225mA 1.2Ω±30% 48MHz
LQH2MCN120K02p12μH ±10% 1MHz 210mA 1.4Ω±30% 44MHz
LQH2MCN150K02p15μH ±10% 1MHz 200mA 1.6Ω±30% 40MHz
LQH2MCN180K02p18μH ±10% 1MHz 190mA 1.8Ω±30% 35MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: No Shield
Only for reflow soldering
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, inductance will be within ±10% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self-
generated heat shall be limited to 40°C max.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
53
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH2MCN_02
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH2MCN220K02p22μH ±10% 1MHz 185mA 2.1Ω±30% 30MHz
LQH2MCN270K02p27μH ±10% 1MHz 180mA 2.5Ω±30% 30MHz
LQH2MCN330K02p33μH ±10% 1MHz 160mA 2.8Ω±30% 28MHz
LQH2MCN390K02p39μH ±10% 1MHz 125mA 4.4Ω±30% 24MHz
LQH2MCN470K02p47μH ±10% 1MHz 120mA 5.1Ω±30% 18MHz
LQH2MCN560K02p56μH ±10% 1MHz 110mA 5.7Ω±30% 17MHz
LQH2MCN680K02p68μH ±10% 1MHz 100mA 6.6Ω±30% 14MHz
LQH2MCN820K02p82μH ±10% 1MHz 90mA 7.5Ω±30% 14MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: No Shield
Only for reflow soldering
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, inductance will be within ±10% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self-
generated heat shall be limited to 40°C max.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
LQH2MCN_52 Series 0806 (2016) inch (mm)
(in mm)
2.0±0.2
0.6±0.2 0.6±0.2
1.6±0.2
0.65±0.05
1.0±0.2
0.1 min.
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
BPacking in Bulk 100
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH2MCN1R0M52p1.0μH ±20% 1MHz 595mA 0.25Ω±30% 215MHz
LQH2MCN1R5M52p1.5μH ±20% 1MHz 540mA 0.33Ω±30% 165MHz
LQH2MCN2R2M52p2.2μH ±20% 1MHz 500mA 0.42Ω±30% 125MHz
LQH2MCN3R3M52p3.3μH ±20% 1MHz 360mA 0.74Ω±30% 110MHz
LQH2MCN4R7M52p4.7μH ±20% 1MHz 335mA 0.91Ω±30% 90MHz
LQH2MCN6R8M52p6.8μH ±20% 1MHz 285mA 1.23Ω±30% 65MHz
LQH2MCN100M52p10μH ±20% 1MHz 200mA 2.27Ω±30% 60MHz
LQH2MCN120M52p12μH ±20% 1MHz 170mA 2.4Ω±30% 30MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: No Shield
Only for reflow soldering
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, inductance will be within ±10% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self-
generated heat shall be limited to 40°C max.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
54
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH2MCN_52
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH2MCN150M52p15μH ±20% 1MHz 150mA 3.5Ω±30% 30MHz
LQH2MCN180M52p18μH ±20% 1MHz 140mA 4.0Ω±30% 30MHz
LQH2MCN220M52p22μH ±20% 1MHz 130mA 5.5Ω±30% 30MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: No Shield
Only for reflow soldering
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, inductance will be within ±10% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self-
generated heat shall be limited to 40°C max.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
LQH2MPN_GR Series 0806 (2016) inch (mm)
(in mm)
2.0±0.1
1.6±0.1
0.90±0.05
0.65±0.20.65±0.2
1.0±0.2
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH2MPNR33NGRp0.33μH ±30% 1MHz 2200mA 1130mA(Ambient temp.85°C)
670mA(Ambient temp.105°C) 0.15Ω±20% 130MHz
LQH2MPNR47NGRp0.47μH ±30% 1MHz 1950mA 1060mA(Ambient temp.85°C)
630mA(Ambient temp.105°C) 0.18Ω±20% 120MHz
LQH2MPN1R0NGRp1.0μH ±30% 1MHz 1550mA 900mA(Ambient temp.85°C)
540mA(Ambient temp.105°C) 0.25Ω±20% 100MHz
LQH2MPN1R5NGRp1.5μH ±30% 1MHz 1330mA 790mA(Ambient temp.85°C)
470mA(Ambient temp.105°C) 0.32Ω±20% 60MHz
LQH2MPN2R2MGRp2.2μH ±20% 1MHz 1180mA 680mA(Ambient temp.85°C)
400mA(Ambient temp.105°C) 0.39Ω±20% 50MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Ferrite Core
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C. When rated current is applied to the products, the self-temperature rise shall be limited to 40°C max. (ambient temperature 85°C). When rated current is applied to the
products, the self-temperature rise shall be limited to 20°C max. (ambient temperature 85 °C to 105°C).
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
55
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH2MPN_GR
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH2MPN3R3MGRp3.3μH ±20% 1MHz 1020mA 640mA(Ambient temp.85°C)
380mA(Ambient temp.105°C) 0.47Ω±20% 45MHz
LQH2MPN4R7MGRp4.7μH ±20% 1MHz 870mA 580mA(Ambient temp.85°C)
340mA(Ambient temp.105°C) 0.60Ω±20% 40MHz
LQH2MPN6R8MGRp6.8μH ±20% 1MHz 730mA 530mA(Ambient temp.85°C)
310mA(Ambient temp.105°C) 0.72Ω±20% 35MHz
LQH2MPN100MGRp10μH ±20% 1MHz 610mA 480mA(Ambient temp.85°C)
280mA(Ambient temp.105°C) 0.88Ω±20% 30MHz
LQH2MPN150MGRp15μH ±20% 1MHz 490mA 340mA(Ambient temp.85°C)
200mA(Ambient temp.105°C) 1.7Ω±20% 25MHz
LQH2MPN220MGRp22μH ±20% 1MHz 410mA 290mA(Ambient temp.85°C)
170mA(Ambient temp.105°C) 2.1Ω±20% 20MHz
LQH2MPN330MGRp33μH ±20% 1MHz 310mA 200mA(Ambient temp.85°C)
120mA(Ambient temp.105°C) 4.3Ω±20% 15MHz
LQH2MPN470MGRp47μH ±20% 1MHz 270mA 180mA(Ambient temp.85°C)
110mA(Ambient temp.105°C) 5.3Ω±20% 10MHz
LQH2MPN680MGRp68μH ±20% 1MHz 230mA 160mA(Ambient temp.85°C)
100mA(Ambient temp.105°C) 6.7Ω±20% 7MHz
LQH2MPN820MGRp82μH ±20% 1MHz 210mA 150mA(Ambient temp.85°C)
90mA(Ambient temp.105°C) 7.3Ω±20% 5MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Ferrite Core
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C. When rated current is applied to the products, the self-temperature rise shall be limited to 40°C max. (ambient temperature 85°C). When rated current is applied to the
products, the self-temperature rise shall be limited to 20°C max. (ambient temperature 85 °C to 105°C).
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
56
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH2MPN_GR
LQH2HPN_DR Series 1008 (2520) inch (mm)
(in mm)
1.57±0.2
2.0±0.12.5±0.1
0.85±0.2
0.55±0.05
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 4000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH2HPNR47MDRp0.47μH ±20% 1MHz 1670mA 1250mA(Ambient temp.85°C)
750mA(Ambient temp.105°C) 0.14Ω±20% 120MHz
LQH2HPN1R0MDRp1.0μH ±20% 1MHz 1370mA 960mA(Ambient temp.85°C)
580mA(Ambient temp.105°C) 0.24Ω±20% 100MHz
LQH2HPN1R5MDRp1.5μH ±20% 1MHz 1120mA 900mA(Ambient temp.85°C)
540mA(Ambient temp.105°C) 0.29Ω±20% 60MHz
LQH2HPN2R2MDRp2.2μH ±20% 1MHz 850mA 820mA(Ambient temp.85°C)
500mA(Ambient temp.105°C) 0.34Ω±20% 50MHz
LQH2HPN3R3MDRp3.3μH ±20% 1MHz 750mA 730mA(Ambient temp.85°C)
440mA(Ambient temp.105°C) 0.45Ω±20% 45MHz
LQH2HPN4R7MDRp4.7μH ±20% 1MHz 650mA 650mA(Ambient temp.85°C)
390mA(Ambient temp.105°C) 0.56Ω±20% 40MHz
LQH2HPN6R8MDRp6.8μH ±20% 1MHz 550mA 490mA(Ambient temp.85°C)
300mA(Ambient temp.105°C) 1.0Ω±20% 35MHz
LQH2HPN100MDRp10μH ±20% 1MHz 420mA 430mA(Ambient temp.85°C)
260mA(Ambient temp.105°C) 1.2Ω±20% 30MHz
LQH2HPN150MDRp15μH ±20% 1MHz 340mA 290mA(Ambient temp.85°C)
180mA(Ambient temp.105°C) 2.5Ω±20% 25MHz
LQH2HPN220MDRp22μH ±20% 1MHz 260mA 270mA(Ambient temp.85°C)
170mA(Ambient temp.105°C) 3.0Ω±20% 20MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Magnetic Resin
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C. When rated current is applied to the products, the self-temperature rise shall be limited to 40°C max. (ambient temperature 85°C). When rated current is applied to the
products, the self-temperature rise shall be limited to 20°C max. (ambient temperature 85 °C to 105°C).
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
57
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH2HPN_DR
LQH2HPN_GR Series 1008 (2520) inch (mm)
2.5±0.2
0.62±0.2
(in mm)
0.9±0.1
2.0±0.2
2.0±0.2
0.62±0.2
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 3000
Part Number
(p: packaging code)
Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.) Operating temp. range
(Self-temp. rise included)
Operating temp. range
(Self-temp. rise not included) Remark
LQH2HPNR47MGRp
0.47μH ±20% 1MHz 2900mA 2520mA(Ambient temp.85°C)
1470mA(Ambient temp.105°C) 0.045Ω±20% 120MHz -40 to 125°C -40 to 105°C *1
LQH2HPNR68MGRp
0.68μH ±20% 1MHz 2430mA 2330mA(Ambient temp.85°C)
1350mA(Ambient temp.105°C) 0.055Ω±20% 110MHz -40 to 125°C -40 to 105°C *1
LQH2HPN1R0MGRp
1.0μH ±20% 1MHz 2130mA 2100mA(Ambient temp.85°C)
1200mA(Ambient temp.105°C) 0.068Ω±20% 100MHz -40 to 125°C -40 to 105°C *1
LQH2HPN1R5MGRp
1.5μH ±20% 1MHz 1700mA 1850mA(Ambient temp.85°C)
1110mA(Ambient temp.105°C) 0.087Ω±20% 90MHz -40 to 125°C -40 to 105°C *1
LQH2HPN2R2MGRp
2.2μH ±20% 1MHz 1550mA 1470mA(Ambient temp.85°C)
850mA(Ambient temp.105°C) 0.134Ω±20% 80MHz -40 to 125°C -40 to 105°C *1
LQH2HPN3R3MGRp
3.3μH ±20% 1MHz 1230mA 1100mA(Ambient temp.85°C)
660mA(Ambient temp.105°C) 0.225Ω±20% 70MHz -40 to 125°C -40 to 105°C *1
LQH2HPN4R7MGRp
4.7μH ±20% 1MHz 1090mA 1000mA(Ambient temp.85°C)
570mA(Ambient temp.105°C) 0.300Ω±20% 50MHz -40 to 125°C -40 to 105°C *1
LQH2HPN6R8MGRp
6.8μH ±20% 1MHz 830mA 860mA(Ambient temp.85°C)
490mA(Ambient temp.105°C) 0.395Ω±20% 40MHz -40 to 125°C -40 to 105°C *1
LQH2HPN100MGRp
10μH ±20% 1MHz 700mA 710mA(Ambient temp.85°C)
430mA(Ambient temp.105°C) 0.560Ω±20% 30MHz -40 to 125°C -40 to 105°C *1
LQH2HPN150MGRp
15μH ±20% 1MHz 570mA 560mA(Ambient temp.85°C)
310mA(Ambient temp.105°C) 0.925Ω±20% 20MHz -40 to 125°C -40 to 105°C *1
LQH2HPN220MGRp
22μH ±20% 1MHz 460mA 430mA(Ambient temp.85°C)
250mA(Ambient temp.105°C) 1.360Ω±20% 15MHz -40 to 125°C -40 to 105°C *1
LQH2HPN101MGRp
100μH ±20% 1MHz 210mA 150mA(Ambient temp.85°C) 5.9Ω±20% 5MHz -40 to 105°C -40 to 85°C *2
Class of Magnetic Shield: Magnetic Resin
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self Resonant Frequency
*1: When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 40°C (at the rated current under 85°C) or 20°C (at the
rated current under 105°C).
*2: When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 105°C. When rated current is applied to the products, the temperature rise caused by self-generated heat shall be limited to 20°C.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
58
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH2HPN_GR
LQH2HPN_JR Series 1008 (2520) inch (mm)
2.5±0.2
0.65±0.2
(in mm)
1.1±0.1
2.0±0.2
0.65±0.2
AB
A: 2.75 max.
B: 2.25 max.
Packaging
Code Packaging Minimum
Quantity
Lø180mm Embossed Taping 2000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH2HPNR47NJRp0.47μH ±30% 1MHz 3500mA 2750mA(Ambient temp.85°C)
1650mA(Ambient temp.105°C) 0.031Ω±20% 190MHz
LQH2HPN1R0NJRp1.0μH ±30% 1MHz 2600mA 2400mA(Ambient temp.85°C)
1440mA(Ambient temp.105°C) 0.048Ω±20% 120MHz
LQH2HPN1R2NJRp1.2μH ±30% 1MHz 2450mA 2070mA(Ambient temp.85°C)
1240mA(Ambient temp.105°C) 0.055Ω±20% 100MHz
LQH2HPN1R5NJRp1.5μH ±30% 1MHz 2200mA 1810mA(Ambient temp.85°C)
1080mA(Ambient temp.105°C) 0.075Ω±20% 95MHz
LQH2HPN2R2MJRp2.2μH ±20% 1MHz 1700mA 1650mA(Ambient temp.85°C)
990mA(Ambient temp.105°C) 0.092Ω±20% 50MHz
LQH2HPN3R3MJRp3.3μH ±20% 1MHz 1450mA 1420mA(Ambient temp.85°C)
850mA(Ambient temp.105°C) 0.13Ω±20% 45MHz
LQH2HPN4R7MJRp4.7μH ±20% 1MHz 1230mA 1290mA(Ambient temp.85°C)
770mA(Ambient temp.105°C) 0.17Ω±20% 40MHz
LQH2HPN6R8MJRp6.8μH ±20% 1MHz 1050mA 1000mA(Ambient temp.85°C)
600mA(Ambient temp.105°C) 0.26Ω±20% 35MHz
LQH2HPN100MJRp10μH ±20% 1MHz 830mA 830mA(Ambient temp.85°C)
490mA(Ambient temp.105°C) 0.38Ω±20% 30MHz
LQH2HPN150MJRp15μH ±20% 1MHz 690mA 710mA(Ambient temp.85°C)
420mA(Ambient temp.105°C) 0.55Ω±20% 20MHz
LQH2HPN220MJRp22μH ±20% 1MHz 530mA 540mA(Ambient temp.85°C)
320mA(Ambient temp.105°C) 0.84Ω±20% 20MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Magnetic Resin
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of initial inductance value range. Keep the temperature (ambient temperature plus self-generation of heat)
under 125°C. When rated current is applied to the products, the self-temperature rise shall be limited to 40°C max. (ambient temperature 85°C). When rated current is applied to the
products, the self-temperature rise shall be limited to 20°C max. (ambient temperature 85 °C to 105°C).
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
59
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH2HPN_JR
LQH31CN_03 Series 1206 (3216) inch (mm)
2.3±0.2
1.8±0.2
1.6±0.2
1.6±0.2
3.2±0.3
0.7min. 0.7min. (in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH31CNR12M03p0.12μH ±20% 1MHz 970mA 0.08Ω±40% 250MHz
LQH31CNR22M03p0.22μH ±20% 1MHz 850mA 0.10Ω±40% 250MHz
LQH31CNR47M03p0.47μH ±20% 1MHz 700mA 0.15Ω±40% 180MHz
LQH31CN1R0M03p1.0μH ±20% 1MHz 510mA 0.28Ω±30% 100MHz
LQH31CN2R2M03p2.2μH ±20% 1MHz 430mA 0.41Ω±30% 50MHz
LQH31CN4R7M03p4.7μH ±20% 1MHz 340mA 0.65Ω±30% 31MHz
LQH31CN100K03p10μH ±10% 1MHz 230mA 1.3Ω±30% 20MHz
LQH31CN220K03p22μH ±10% 1MHz 160mA 3.0Ω±30% 14MHz
LQH31CN470K03p47μH ±10% 1MHz 100mA 8.0Ω±30% 10MHz
LQH31CN101K03p100μH ±10% 1MHz 80mA 12.0Ω±30% 7MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: No Shield
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, inductance will be within ±10% of initial inductance value. When rated current is applied to the products, the temperature rise caused by self-
generated heat shall be limited to 35°C max.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Impedance-Frequency Characteristics (Typ.)
LQH32CN_23 Series 1210 (3225) inch (mm)
2.5±0.2
2.0±0.2
2.5±0.2
3.2±0.3
0.9±0.3
0.9±0.3
2.5±0.2
Marking of inductance letter is
available. (optional)
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
60
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH31CN_03
Continued from the preceding page.
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH32CN1R0M23p1.0μH ±20% 1MHz 800mA 0.09Ω±30% 96MHz
LQH32CN2R2M23p2.2μH ±20% 1MHz 600mA 0.13Ω±30% 64MHz
LQH32CN4R7M23p4.7μH ±20% 1MHz 450mA 0.2Ω±30% 43MHz
LQH32CN100K23p10μH ±10% 1MHz 300mA 0.44Ω±30% 26MHz
LQH32CN220K23p22μH ±10% 1MHz 250mA 0.71Ω±30% 19MHz
LQH32CN470K23p47μH ±10% 1MHz 170mA 1.3Ω±30% 15MHz
LQH32CN101K23p100μH ±10% 1MHz 100mA 3.5Ω±30% 10MHz
LQH32CN221K23p220μH ±10% 1MHz 70mA 8.4Ω±30% 6.8MHz
LQH32CN331K23p330μH ±10% 1MHz 60mA 10.0Ω±30% 5.6MHz
LQH32CN391K23p390μH ±10% 1MHz 60mA 17Ω±30% 5.0MHz
LQH32CN471K23p470μH ±10% 1kHz 60mA 19Ω±30% 5.0MHz
LQH32CN561K23p560μH ±10% 1kHz 60mA 22.0Ω±30% 5.0MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: No Shield
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and inductance will be within ±10% of initial inductance value.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Impedance-Frequency Characteristics (Typ.)
LQH32CN_33 Series 1210 (3225) inch (mm)
2.5±0.2
2.0±0.2
2.5±0.2
3.2±0.3
0.9±0.3
0.9±0.3
2.5±0.2 2.5±0.2
A
A: 2.8 max.
* Please refer to dimension A for
LQH32CN_33, LQH32CH_33
(2R2M, 4R7M, 100K) types.
(See Fig. 1)
Marking of inductance letter is
available. (optional)
Fig. 1
2.5±0.2
(in mm)
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH32CNR15M33p0.15μH ±20% 1MHz 1450mA 0.028Ω±30% 400MHz
LQH32CNR27M33p0.27μH ±20% 1MHz 1250mA 0.034Ω±30% 250MHz
LQH32CNR47M33p0.47μH ±20% 1MHz 1100mA 0.042Ω±30% 150MHz
LQH32CN1R0M33p1.0μH ±20% 1MHz 1000mA 0.06Ω±30% 100MHz
LQH32CN2R2M33p2.2μH ±20% 1MHz 790mA 0.097Ω±30% 64MHz
LQH32CN4R7M33p4.7μH ±20% 1MHz 650mA 0.15Ω±30% 43MHz
LQH32CN100K33p10μH ±10% 1MHz 450mA 0.3Ω±30% 26MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: No Shield
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and inductance will be within ±10% of initial inductance value.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
61
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH32CN_33
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Impedance-Frequency Characteristics (Typ.)
LQH32CN_53 Series 1210 (3225) inch (mm)
2.5±0.2 2.5±0.2
2.5±0.2
3.2±0.3
A : 2.8 max.
AA
(in mm)
Marking of inductance letter is
available. (optional)
0.9±0.3 0.9±0.3
1.55±0.15
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH32CN1R0M53p1.0μH ±20% 1MHz 1000mA 0.060Ω±30% 100MHz
LQH32CN2R2M53p2.2μH ±20% 1MHz 790mA 0.097Ω±30% 64MHz
LQH32CN3R3M53p3.3μH ±20% 1MHz 710mA 0.12Ω±30% 50MHz
LQH32CN4R7M53p4.7μH ±20% 1MHz 650mA 0.15Ω±30% 43MHz
LQH32CN6R8M53p6.8μH ±20% 1MHz 540mA 0.25Ω±30% 32MHz
LQH32CN100K53p10μH ±10% 1MHz 450mA 0.30Ω±30% 26MHz
LQH32CN150K53p15μH ±10% 1MHz 300mA 0.58Ω±30% 26MHz
LQH32CN220K53p22μH ±10% 1MHz 250mA 0.71Ω±30% 19MHz
LQH32CN330K53p33μH ±10% 1MHz 200mA 1.1Ω±30% 17MHz
LQH32CN470K53p47μH ±10% 1MHz 170mA 1.3Ω±30% 15MHz
LQH32CN680K53p68μH ±10% 1MHz 130mA 2.2Ω±30% 12MHz
LQH32CN101K53p100μH ±10% 1MHz 100mA 3.5Ω±30% 10MHz
Operating temp. range: -40 to 85°C
Class of Magnetic Shield: No Shield
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and inductance will be within ±10% of initial inductance value.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
62
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH32CN_53
LQH32DN_23 Series 1210 (3225) inch (mm)
2.5±0.2 2.5±0.2
2.0±0.2
2.5±0.23.2±0.3
(in mm)
Marking of inductance letter is
available. (optional)
0.9±0.3 0.9±0.3
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.) Operating temp. range
LQH32DN1R0M23p1.0μH ±20% 1MHz 800mA 0.09Ω±30% 96MHz -40 to 105°C
LQH32DN2R2M23p2.2μH ±20% 1MHz 600mA 0.13Ω±30% 64MHz -40 to 105°C
LQH32DN3R3M23p3.3μH ±20% 1MHz 530mA 0.20Ω±30% 50MHz -40 to 105°C
LQH32DN4R7M23p4.7μH ±20% 1MHz 450mA 0.20Ω±30% 43MHz -40 to 105°C
LQH32DN100K23p10μH ±10% 1MHz 300mA 0.44Ω±30% 26MHz -40 to 105°C
LQH32DN220K23p22μH ±10% 1MHz 250mA 0.71Ω±30% 19MHz -40 to 105°C
LQH32DN390K23p39μH ±10% 1MHz 200mA 1.2Ω±30% 16MHz -40 to 105°C
LQH32DN470K23p47μH ±10% 1MHz 170mA 1.3Ω±30% 15MHz -40 to 105°C
LQH32DN680K23p68μH ±10% 1MHz 130mA 2.2Ω±30% 12MHz -40 to 105°C
LQH32DN101K23p100μH ±10% 1MHz 100mA 3.5Ω±30% 10MHz -40 to 105°C
LQH32DN151K23p150μH ±10% 1MHz 80mA 5.1Ω±30% 8.0MHz -40 to 105°C
LQH32DN221K23p220μH ±10% 1MHz 70mA 8.4Ω±30% 6.8MHz -40 to 105°C
LQH32DN331K23p330μH ±10% 1MHz 60mA 10.0Ω±30% 5.6MHz -40 to 105°C
LQH32DN391K23p390μH ±10% 1MHz 60mA 17Ω±30% 5MHz -40 to 85°C
LQH32DN471K23p470μH ±10% 1kHz 60mA 19Ω±30% 5MHz -40 to 85°C
LQH32DN561K23p560μH ±10% 1kHz 60mA 22Ω±30% 5MHz -40 to 85°C
Class of Magnetic Shield: No Shield
Only for reflow soldering
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and inductance will be within ±10% of initial inductance value.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
63
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH32DN_23
LQH32DN_53 Series 1210 (3225) inch (mm)
0.9±0.3 0.9±0.3
Marking of inductance letter is
available. (optional)
AA
2.5±0.2
3.2±0.3
2.5±0.2
2.5±0.2
(in mm)
A : 2.8 max.
1.55±0.15
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current DC Resistance S.R.F.* (min.)
LQH32DN1R0M53p1.0μH ±20% 1MHz 1000mA 0.060Ω±30% 100MHz
LQH32DN2R2M53p2.2μH ±20% 1MHz 790mA 0.097Ω±30% 64MHz
LQH32DN3R3M53p3.3μH ±20% 1MHz 710mA 0.12Ω±30% 50MHz
LQH32DN4R7M53p4.7μH ±20% 1MHz 650mA 0.15Ω±30% 43MHz
LQH32DN6R8M53p6.8μH ±20% 1MHz 540mA 0.25Ω±30% 32MHz
LQH32DN100K53p10μH ±10% 1MHz 450mA 0.30Ω±30% 26MHz
LQH32DN150K53p15μH ±10% 1MHz 300mA 0.58Ω±30% 26MHz
LQH32DN220K53p22μH ±10% 1MHz 250mA 0.71Ω±30% 19MHz
LQH32DN330K53p33μH ±10% 1MHz 200mA 1.1Ω±30% 17MHz
LQH32DN470K53p47μH ±10% 1MHz 170mA 1.3Ω±30% 15MHz
LQH32DN680K53p68μH ±10% 1MHz 130mA 2.2Ω±30% 12MHz
LQH32DN101K53p100μH ±10% 1MHz 100mA 3.5Ω±30% 10MHz
Operating temp. range: -40 to 105°C
Class of Magnetic Shield: No Shield
Only for reflow soldering
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, self-temperature rise shall be limited to 20°C max and inductance will be within ±10% of initial inductance value.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Impedance-Frequency Characteristics (Typ.)
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
64
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH32DN_53
LQH32PB_N0 Series 1210 (3225) inch (mm)
2.7±0.2
(in mm)
3.2±0.3
2.5±0.2
2.5±0.2
A: 2.8 max.
AA
0.9±0.30.9±0.3
1.55±0.15
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
BPacking in Bulk 500
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH32PBR47NN0p0.47μH ±30% 1MHz 3400mA 2550mA(Ambient temp.85°C)
1600mA(Ambient temp.105°C) 0.030Ω±20% 100MHz
LQH32PB1R0NN0p1.0μH ±30% 1MHz 2300mA 2050mA(Ambient temp.85°C)
1320mA(Ambient temp.105°C) 0.045Ω±20% 100MHz
LQH32PB1R5NN0p1.5μH ±30% 1MHz 1750mA 1750mA(Ambient temp.85°C)
1010mA(Ambient temp.105°C) 0.057Ω±20% 70MHz
LQH32PB2R2NN0p2.2μH ±30% 1MHz 1550mA 1600mA(Ambient temp.85°C)
970mA(Ambient temp.105°C) 0.076Ω±20% 70MHz
LQH32PB3R3NN0p3.3μH ±30% 1MHz 1250mA 1200mA(Ambient temp.85°C)
670mA(Ambient temp.105°C) 0.12Ω±20% 50MHz
LQH32PB4R7NN0p4.7μH ±30% 1MHz 1000mA 1000mA(Ambient temp.85°C)
530mA(Ambient temp.105°C) 0.18Ω±20% 40MHz
LQH32PB6R8NN0p6.8μH ±30% 1MHz 850mA 850mA(Ambient temp.85°C)
510mA(Ambient temp.105°C) 0.24Ω±20% 40MHz
LQH32PB100MN0p10μH ±20% 1MHz 750mA 700mA(Ambient temp.85°C)
380mA(Ambient temp.105°C) 0.38Ω±20% 30MHz
LQH32PB150MN0p15μH ±20% 1MHz 600mA 520mA(Ambient temp.85°C)
320mA(Ambient temp.105°C) 0.57Ω±20% 20MHz
LQH32PB220MN0p22μH ±20% 1MHz 500mA 450mA(Ambient temp.85°C)
240mA(Ambient temp.105°C) 0.81Ω±20% 20MHz
LQH32PB330MN0p33μH ±20% 1MHz 380mA 390mA(Ambient temp.85°C)
190mA(Ambient temp.105°C) 1.15Ω±20% 13MHz
LQH32PB470MN0p47μH ±20% 1MHz 330mA 310mA(Ambient temp.85°C)
140mA(Ambient temp.105°C) 1.78Ω±20% 11MHz
LQH32PB680MN0p68μH ±20% 1MHz 280mA 275mA(Ambient temp.85°C)
120mA(Ambient temp.105°C) 2.28Ω±20% 11MHz
LQH32PB101MN0p100μH ±20% 1MHz 180mA 250mA(Ambient temp.85°C)
110mA(Ambient temp.105°C) 2.70Ω±20% 8MHz
LQH32PB121MN0p120μH ±20% 1MHz 170mA 200mA(Ambient temp.85°C)
80mA(Ambient temp.105°C) 4.38Ω±20% 8MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Magnetic Resin
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
65
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH32PB_N0
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
LQH32PB_NC Series 1210 (3225) inch (mm)
(in mm)
2.5±0.22.7±0.2
1.55±0.15
3.2±0.3 2.5±0.2
0.9±0.3 0.9±0.3
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
BPacking in Bulk 500
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH32PBR47NNCp0.47μH ±30% 1MHz 4400mA 2900mA(Ambient temp.85°C)
1490mA(Ambient temp.105°C) 0.024Ω±20% 100MHz
LQH32PB1R0NNCp1.0μH ±30% 1MHz 3000mA 2500mA(Ambient temp.85°C)
1380mA(Ambient temp.105°C) 0.036Ω±20% 100MHz
LQH32PB1R5NNCp1.5μH ±30% 1MHz 2600mA 2100mA(Ambient temp.85°C)
1110mA(Ambient temp.105°C) 0.053Ω±20% 70MHz
LQH32PB2R2NNCp2.2μH ±30% 1MHz 2000mA 1850mA(Ambient temp.85°C)
910mA(Ambient temp.105°C) 0.064Ω±20% 70MHz
LQH32PB3R3NNCp3.3μH ±30% 1MHz 1900mA 1550mA(Ambient temp.85°C)
800mA(Ambient temp.105°C) 0.100Ω±20% 50MHz
LQH32PB4R7NNCp4.7μH ±30% 1MHz 1600mA 1200mA(Ambient temp.85°C)
610mA(Ambient temp.105°C) 0.155Ω±20% 40MHz
LQH32PB6R8NNCp6.8μH ±30% 1MHz 1300mA 1100mA(Ambient temp.85°C)
550mA(Ambient temp.105°C) 0.220Ω±20% 40MHz
LQH32PB100MNCp10μH ±20% 1MHz 1000mA 900mA(Ambient temp.85°C)
450mA(Ambient temp.105°C) 0.295Ω±20% 30MHz
LQH32PB150MNCp15μH ±20% 1MHz 800mA 700mA(Ambient temp.85°C)
330mA(Ambient temp.105°C) 0.475Ω±20% 20MHz
LQH32PB220MNCp22μH ±20% 1MHz 650mA 550mA(Ambient temp.85°C)
270mA(Ambient temp.105°C) 0.685Ω±20% 20MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 105°C
Class of Magnetic Shield: Magnetic Resin
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
66
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH32PB_NC
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
LQH32PN_N0 Series 1210 (3225) inch (mm)
2.7±0.2
(in mm)
3.2±0.3
2.5±0.2
2.5±0.2
A: 2.8 max.
AA
0.9±0.30.9±0.3
1.55±0.15
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
BPacking in Bulk 500
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH32PNR47NN0p0.47μH ±30% 1MHz 3400mA 2550mA 0.030Ω±20% 100MHz
LQH32PN1R0NN0p1.0μH ±30% 1MHz 2300mA 2050mA 0.045Ω±20% 100MHz
LQH32PN1R5NN0p1.5μH ±30% 1MHz 1750mA 1750mA 0.057Ω±20% 70MHz
LQH32PN2R2NN0p2.2μH ±30% 1MHz 1550mA 1600mA 0.076Ω±20% 70MHz
LQH32PN3R3NN0p3.3μH ±30% 1MHz 1250mA 1200mA 0.12Ω±20% 50MHz
LQH32PN4R7NN0p4.7μH ±30% 1MHz 1000mA 1000mA 0.18Ω±20% 40MHz
LQH32PN6R8NN0p6.8μH ±30% 1MHz 850mA 850mA 0.24Ω±20% 40MHz
LQH32PN100MN0p10μH ±20% 1MHz 750mA 700mA 0.38Ω±20% 30MHz
LQH32PN150MN0p15μH ±20% 1MHz 600mA 520mA 0.57Ω±20% 20MHz
LQH32PN220MN0p22μH ±20% 1MHz 500mA 450mA 0.81Ω±20% 20MHz
LQH32PN330MN0p33μH ±20% 1MHz 380mA 390mA 1.15Ω±20% 13MHz
LQH32PN470MN0p47μH ±20% 1MHz 330mA 310mA 1.78Ω±20% 11MHz
LQH32PN680MN0p68μH ±20% 1MHz 280mA 275mA 2.28Ω±20% 11MHz
LQH32PN101MN0p100μH ±20% 1MHz 180mA 250mA 2.70Ω±20% 8MHz
LQH32PN121MN0p120μH ±20% 1MHz 170mA 200mA 4.38Ω±20% 8MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Magnetic Resin
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Continued on the following page.
O05E.pdf
Jan.25,2019
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
67
Inductors for Power LinesInductors for General CircuitsRF Inductors
LQH32PN_N0
Continued from the preceding page.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (Typ.)
Temperature Rise Characteristics (Typ.)
LQH32PN_NC Series 1210 (3225) inch (mm)
(in mm)
2.5±0.22.7±0.2
1.55±0.15
3.2±0.3 2.5±0.2
0.9±0.3 0.9±0.3
Packaging
Code Packaging Minimum
Quantity
Kø330mm Embossed Taping 7500
Lø180mm Embossed Taping 2000
Part Number
(p: packaging code) Inductance Inductance
Test Frequency Rated Current (Isat)* Rated Current (Itemp)* DC Resistance S.R.F.* (min.)
LQH32PNR47NNCp0.47μH ±30% 1MHz 4400mA 2900mA 0.024Ω±20% 100MHz
LQH32PN1R0NNCp1.0μH ±30% 1MHz 3000mA 2500mA 0.036Ω±20% 100MHz
LQH32PN1R5NNCp1.5μH ±30% 1MHz 2600mA 2100mA 0.053Ω±20% 70MHz
LQH32PN2R2NNCp2.2μH ±30% 1MHz 2000mA 1850mA 0.064Ω±20% 70MHz
LQH32PN3R3NNCp3.3μH ±30% 1MHz 1900mA 1550mA 0.100Ω±20% 50MHz
LQH32PN4R7NNCp4.7μH ±30% 1MHz 1600mA 1200mA 0.155Ω±20% 40MHz
LQH32PN6R8NNCp6.8μH ±30% 1MHz 1300mA 1100mA 0.220Ω±20% 40MHz
LQH32PN100MNCp10μH ±20% 1MHz 1000mA 900mA 0.295Ω±20% 30MHz
LQH32PN150MNCp15μH ±20% 1MHz 800mA 700mA 0.475Ω±20% 20MHz
LQH32PN220MNCp22μH ±20% 1MHz 650mA 550mA 0.685Ω±20% 20MHz
Operating temp. range (Self-temp. rise included): -40 to 125°C
Operating temp. range (Self-temp. rise not included): -40 to 85°C
Class of Magnetic Shield: Magnetic Resin
Only for reflow soldering
*Isat: Rated Current based on Inductance change
*Itemp: Rated Current based on Temperature rise
*S.R.F.: Self Resonant Frequency
When rated current is applied to the products, inductance will be within ±30% of nominal inductance value. When rated current is applied to the products, the temperature rise caused by
self-generated heat shall be limited to 40°C max. Keep the temperature (ambient temperature plus self-generation of heat) under 125°C.
Inductance-Frequency Characteristics (Typ.)
Inductance-Current Characteristics (