XQ-E LEDs Datasheet

Cree Inc.

View All Related Products | Download PDF Datasheet

Datasheet

PRODUCT FAMILY DATA SHEET
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and
XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-DS83 REV 9B
Cree® XLamp® XQ-E LEDs
XQ-E High Density LEDs
XQ-E High Intensity LEDs
PRODUCT DESCRIPTION
The XLamp® XQ-E LEDs are available
in two versions: high density and
high intensity. The XQ-E High Density
LED enables lighting manufacturers
to significantly reduce the size and
total cost of their LED luminaires
versus similar performance 3.5-mm
footprint LEDs, without sacrificing
lumen output, efficacy or reliability.
The XQ-E’s combination of optical
symmetry, consistent design across all
configurations and tiny 1.6mm X 1.6mm
footprint simplifies manufacturing and
design while providing excellent color
mixing.
The new XQ-E High Intensity LED uses an
innovative primary optic design optimized
to deliver maximum candela, especially
through narrow-beam secondary optics.
FEATURES
Crees smallest lighting class LED:
1.6mm X 1.6mm
Available in high-density &
high-intensity versions for design
flexibility
Available in 70, 80, & 90 CRI white,
royal blue, blue, PC blue, green,
PC amber, red-orange, red & high
efficiency (HE) photo red
Maximum drive current: 1A (high
density & high intensity)
Reflow solderable - JEDEC
J-STD-020C compatible
Unlimited floor life at
≤ 30°C/85% RH
RoHS and REACh compliant
UL® recognized component (E349212)
TABLE OF CONTENTS
Characteristics ............................................2
Flux Characteristics - High Density White .3
Flux Characteristics - High Density Color ..4
Flux Characteristics - High Intensity
White ............................................................6
Flux Characteristics - High Intensity
Color.............................................................7
Relative Spectral Power Distribution .........9
Relative Flux vs. Junction Temperature .. 11
Electrical Characteristics ......................... 14
Relative Flux vs. Current .......................... 16
Typical Spatial Distribution ...................... 19
Thermal Design ........................................ 21
Reflow Soldering Characteristics ............ 23
Notes ........................................................ 24
Mechanical Dimensions .......................... 26
Tape and Reel ........................................... 28
Packaging ................................................. 30
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
2
XLAMP® XQ-E LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point - white, royal blue, blue, PC blue °C/W 6
Thermal resistance, junction to solder point - green °C/W 9
Thermal resistance, junction to solder point - PC amber °C/W 8
Thermal resistance, junction to solder point - red-orange, red, HE photo red °C/W 5
Viewing angle (FWHM) - High Density white degrees 110
Viewing angle (FWHM) - High Density royal blue, blue, green, PC amber degrees 125
Viewing angle (FWHM) - High Density red-orange, red, HE photo red degrees 130
Viewing angle (FWHM) - High Intensity white degrees 120
Viewing angle (FWHM) - High Intensity royal blue, blue, PC blue, green degrees 130
Viewing angle (FWHM) - High Intensity PC amber degrees 120
Viewing angle (FWHM) - High Intensity red-orange, red degrees 125
Temperature coefficient of voltage - white mV/°C -2.3
Temperature coefficient of voltage - royal blue, blue, PC blue mV/°C -3.3
Temperature coefficient of voltage - green mV/°C -3.8
Temperature coefficient of voltage - PC amber mV/°C -3.3
Temperature coefficient of voltage - red-orange, red mV/°C -1.8
Temperature coefficient of voltage - HE photo red mV/°C -1.6
ESD withstand voltage (HBM per Mil-Std-883D)- High Density V 8000
ESD classification (HBM per Mil-Std-883D) - High Intensity Class 3A
DC forward current mA 1000
Reverse voltage V 5
Forward voltage (@ 350mA, 85°C) - white V2.9 3.25
Forward voltage (@ 350 mA, 25°C) - royal blue, blue, PC blue V3.1 3.5
Forward voltage (@ 350 mA, 25°C) - green V3.2 3.6
Forward voltage (@ 350 mA, 25°C) - PC amber V3.1 3.5
Forward voltage (@ 350 mA, 25°C) - red-orange, red V2.2 2.6
Forward voltage (@ 350 mA, 25°C) - HE photo red V2.1 2.4
LED junction temperature °C 150
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
3
XLAMP® XQ-E LED
FLUX CHARACTERISTICS - HIGH DENSITY WHITE (TJ=85°C)
The following table provides several base order codes for XLamp XQ-E High Density white LEDs. It is important to note that the base
order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete
description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.
Color
CCT Range Minimum Luminous Flux (lm)
@ 350mA
Calculated Minimum
Luminous Flux (lm)
@ 85°C** Order Code
Minimum Maximum Group Flux (lm) @
85°C
Flux (lm) @
25°C* 700mA 1.0A
Cool White 5000 K 8300 K
R3 122 141 210 270 XQEAWT-00-0000-00000LFE1
R2 114 132 196 252 XQEAWT-00-0000-00000LEE1
70-CRI
White 3700 K 8300 K
R3 122 141 210 270 XQEAWT-00-0000-00000BFE1
R2 114 132 196 252 XQEAWT-00-0000-00000BEE1
Neutral
White 3700 K 5300 K
R2 114 132 196 252 XQEAWT-00-0000-00000LEE4
Q5 107 124 184 237 XQEAWT-00-0000-00000LDE4
Q4 100 116 172 221 XQEAWT-00-0000-00000LCE4
Warm White 2700 K 3500 K
Q5 107 124 184 237 XQEAWT-00-0000-00000LDE7
Q4 100 116 172 221 XQEAWT-00-0000-00000LCE7
Q3 93.9 109 162 208 XQEAWT-00-0000-00000LBE7
Q2 87.4 101 150 193 XQEAWT-00-0000-00000LAE7
80-CRI
White 2700 K 3500 K
Q5 107 124 184 237 XQEAWT-00-0000-00000HDE7
Q4 100 116 172 221 XQEAWT-00-0000-00000HCE7
Q3 93.9 109 162 208 XQEAWT-00-0000-00000HBE7
Q2 87.4 101 150 193 XQEAWT-00-0000-00000HAE7
90-CRI
White 2850K 3000 K
P4 80.6 93.3 139 178 XQEAWT-00-0000-00000U9E7
P3 73.9 85.5 127 163 XQEAWT-00-0000-00000U8E7
P2 67.2 77.8 116 149 XQEAWT-00-0000-00000U7E7
N4 62 71.7 107 137 XQEAWT-00-0000-00000U6E7
Notes:
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 24).
Typical CRI for Cool White (5000K – 8300K CCT) is 70.
Typical CRI for Neutral White (3700K – 5300K CCT) is 75.
Typical CRI for Warm White (2700K – 3500K CCT) is 80.
Minimum CRI for 70-CRI White is 70.
Minimum CRI for 80-CRI White is 80.
Minimum CRI for 90-CRI White is 90.
* Flux values @ 25°C are calculated and for reference only.
** Calculated flux values at 700mA and 1A are for reference only.
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
4
XLAMP® XQ-E LED
FLUX CHARACTERISTICS - HIGH DENSITY COLOR (TJ=25°C)
The following tables provide several base order codes for XLamp XQ-E High Density color LEDs. It is important to note that the base
order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete
description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.
Color
Dominant Wavelength Range Minimum Radiant Flux
(mW) @ 350 mA Calculated
Minimum
PPF
(µmol/s)*
Order Code
Minimum Maximum
Group DWL
(nm) Group DWL
(nm) Group Flux (mW)
Royal
Blue D36 450 D57 465
36 (Q) 600 2.27 XQEROY-00-0000-000000Q01
35 (P) 575 2.18 XQEROY-00-0000-000000P01
34 (N) 550 2.08 XQEROY-00-0000-000000N01
33 (M) 525 1.99 XQEROY-00-0000-000000M01
32 (L) 500 1.90 XQEROY-00-0000-000000L01
31 (K) 475 1.80 XQEROY-00-0000-000000K01
30 (J) 450 1.71 XQEROY-00-0000-000000J01
Color
Dominant Wavelength Range Minimum Luminous
Flux (lm) @ 350 mA Order Code
Minimum Maximum
Group DWL
(nm) Group DWL
(nm) Group Flux (lm)
Blue B3 465 B6 485
M3 45.7 XQEBLU-00-0000-000000301
M2 39.8 XQEBLU-00-0000-000000201
K3 35.2 XQEBLU-00-0000-000000Z01
K2 30.6 XQEBLU-00-0000-000000Y01
Color
Dominant Wavelength Range Minimum Luminous
Flux (lm) @ 350 mA Calculated
Minimum
PPF
(µmol/s)*
Order Code
Minimum Maximum
Group DWL
(nm) Group DWL
(nm) Group Flux (lm)
Green G2 520 G4 535
Q5 107 0.98 XQEGRN-00-0000-000000D01
Q4 100 0.91 XQEGRN-00-0000-000000C01
Q3 93.9 0.86 XQEGRN-00-0000-000000B01
Note
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
* Photosynthetic Photon Flux (PPF) values are calculated and for reference only.
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
5
XLAMP® XQ-E LED
Color Color Bin
Minimum Luminous Flux
(lm) @ 350mA Order Code
Group Flux (lm)
PC Amber Y2
P4 80.6 XQEAPA-00-0000-000000901
P3 73.9 XQEAPA-00-0000-000000801
Color
Dominant Wavelength Range Minimum Luminous
Flux (lm) @ 350mA Order Code
Minimum Maximum
Group DWL
(nm) Group DWL
(nm) Group Flux (lm)
Red-
Orange O3 610 O4 620
Q3 93.9 XQERDO-00-0000-000000B01
Q2 87.4 XQERDO-00-0000-000000A01
P4 80.6 XQERDO-00-0000-000000901
P3 73.9 XQERDO-00-0000-000000801
P2 67.2 XQERDO-00-0000-000000701
Color
Dominant Wavelength Range Minimum Luminous
Flux (lm) @ 350mA Calculated
Minimum
PPF
(µmol/s)*
Order Code
Minimum Maximum
Group DWL
(nm) Group DWL
(nm) Group Flux (lm)
Red R2 620 R3 630
P3 73.9 1.92 XQERED-00-0000-000000801
P2 67.2 1.75 XQERED-00-0000-000000701
N4 62 1.61 XQERED-00-0000-000000601
N3 56.8 1.48 XQERED-00-0000-000000501
Color
Peak Wavelength Range Minimum Radiant Flux
(mW) @ 350mA Calculated
Minimum
PPF
(µmol/s)*
Order Code
Min. Max.
Group PWL
(nm) Group PWL
(nm) Group Flux (mW)
HE
Photo
Red
P2 650 P5 670
28 400 2.20 XQEEPR-00-0000-000000B01
27 375 2.06 XQEEPR-00-0000-000000A01
26 350 1.93 XQEEPR-00-0000-000000901
FLUX CHARACTERISTICS - HIGH DENSITY COLOR (TJ=25°C) - CONTINUED
Note
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
* Photosynthetic Photon Flux (PPF) values are calculated and for reference only.
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
6
XLAMP® XQ-E LED
FLUX CHARACTERISTICS - HIGH INTENSITY WHITE (TJ=85°C)
The following table provides several base order codes for XLamp XQ-E High Intensity white LEDs. It is important to note that the base
order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete
description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.
Color
CCT Range Minimum Luminous Flux (lm)
@ 350mA
Calculated Minimum
Luminous Flux (lm)
@ 85°C** Order Code
Minimum Maximum Group Flux (lm) @
85°C
Flux (lm) @
25°C* 700mA 1.0A
Cool White 5000 K 8300 K
R3 122 136 213 276 XQEAWT-H0-0000-00000LFE1
R2 114 127 199 258 XQEAWT-H0-0000-00000LEE1
70-CRI
White 3700 K 8300 K
R3 122 136 213 276 XQEAWT-H0-0000-00000BFE1
R2 114 127 199 258 XQEAWT-H0-0000-00000BEE1
Neutral
White 3700 K 5300 K
R2 114 127 199 258 XQEAWT-H0-0000-00000LEE4
Q5 107 119 187 242 XQEAWT-H0-0000-00000LDE4
Q4 100 111 175 226 XQEAWT-H0-0000-00000LCE4
Warm White 2700 K 3500 K
Q5 107 119 187 242 XQEAWT-H0-0000-00000LDE7
Q4 100 111 175 226 XQEAWT-H0-0000-00000LCE7
Q3 93.9 105 164 213 XQEAWT-H0-0000-00000LBE7
80-CRI
White 2700 K 3500 K
Q5 107 119 187 242 XQEAWT-H0-0000-00000HDE7
Q4 100 111 175 226 XQEAWT-H0-0000-00000HCE7
Q3 93.9 105 164 213 XQEAWT-H0-0000-00000HBE7
90-CRI
White 2850K 3000 K
P4 80.6 89.9 141 182 XQEAWT-H0-0000-00000U9E7
P3 73.9 82.4 129 167 XQEAWT-H0-0000-00000U8E7
P2 67.2 74.9 117 152 XQEAWT-H0-0000-00000U7E7
Notes:
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 24).
Typical CRI for Cool White (5000K – 8300K CCT) is 70.
Typical CRI for Neutral White (3700K – 5300K CCT) is 75.
Typical CRI for Warm White (2700K – 3500K CCT) is 80.
Minimum CRI for 70-CRI White is 70.
Minimum CRI for 80-CRI White is 80.
Minimum CRI for 90-CRI White is 90.
* Flux values @ 25°C are calculated and for reference only.
** Calculated flux values at 700mA and 1A are for reference only.
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
7
XLAMP® XQ-E LED
FLUX CHARACTERISTICS - HIGH INTENSITY COLOR (TJ=25°C)
The following tables provide several base order codes for XLamp XQ-E High Intensity color LEDs. It is important to note that the base
order codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a complete
description of the order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.
Color
Dominant Wavelength Range Minimum Radiant Flux
(mW) @ 350 mA Calculated
Minimum
PPF
(µmol/s)*
Order Code
Minimum Maximum
Group DWL
(nm) Group DWL
(nm) Group Flux (mW)
Royal
Blue D36 450 D57 465
35 (P) 575 2.18 XQEROY-H0-0000-000000P01
34 (N) 550 2.08 XQEROY-H0-0000-000000N01
33 (M) 525 1.99 XQEROY-H0-0000-000000M01
Color
Dominant Wavelength Range Minimum Luminous
Flux (lm) @ 350 mA Order Code
Minimum Maximum
Group DWL
(nm) Group DWL
(nm) Group Flux (lm)
Blue B3 465 B6 485
M3 45.7 XQEBLU-H0-0000-000000301
M2 39.8 XQEBLU-H0-0000-000000201
K3 35.2 XQEBLU-H0-0000-000000Z01
K2 30.6 XQEBLU-H0-0000-000000Y01
XQAAPB-
00-0000-
000000V01
Color Bin
Minimum Luminous Flux
(lm) @ 350mA Order Code
Group Flux (lm)
PC Blue N4B & N5B
N2 51.7 XQEAPB-H0-0000-000000401
M3 45.7 XQEAPB-H0-0000-000000301
M2 39.8 XQEAPB-H0-0000-000000201
Note
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
* Photosynthetic Photon Flux (PPF) values are calculated and for reference only.
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
8
XLAMP® XQ-E LED
Color
Dominant Wavelength Range Minimum Luminous
Flux (lm) @ 350 mA Calculated
Minimum
PPF
(µmol/s)*
Order Code
Minimum Maximum
Group DWL
(nm) Group DWL
(nm) Group Flux (lm)
Green G2 520 G4 535
R2 114 1.11 XQEGRN-H0-0000-000000E01
Q5 107 0.98 XQEGRN-H0-0000-000000D01
Q4 100 0.91 XQEGRN-H0-0000-000000C01
Q3 93.9 0.86 XQEGRN-H0-0000-000000B01
Q2 87.4 0.80 XQEGRN-H0-0000-000000A01
P4 80.6 0.74 XQEGRN-H0-0000-000000901
XQAAPB-
00-0000-
000000V01
Color Bin
Minimum Luminous Flux
(lm) @ 350mA Order Code
Group Flux (lm)
PC Amber Y2
P3 73.9 XQEAPA-H0-0000-000000801
P2 67.2 XQEAPA-H0-0000-000000701
Color
Dominant Wavelength Range Minimum Luminous
Flux (lm) @ 350mA Order Code
Minimum Maximum
Group DWL
(nm) Group DWL
(nm) Group Flux (lm)
Red-
Orange O3 610 O4 620
P3 73.9 XQERDO-H0-0000-000000801
P2 67.2 XQERDO-H0-0000-000000701
N4 62 XQERDO-H0-0000-000000601
Color
Dominant Wavelength Range Minimum Luminous
Flux (lm) @ 350mA Calculated
Minimum
PPF
(µmol/s)*
Order Code
Minimum Maximum
Group DWL
(nm) Group DWL
(nm) Group Flux (lm)
Red R2 620 R3 630
N2 51.7 1.35 XQERED-H0-0000-000000401
M3 45.7 1.19 XQERED-H0-0000-000000301
M2 39.8 1.04 XQERED-H0-0000-000000201
FLUX CHARACTERISTICS - HIGH INTENSITY COLOR (TJ=25°C) - CONTINUED
Note
Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 24).
* Photosynthetic Photon Flux (PPF) values are calculated and for reference only.
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
9
XLAMP® XQ-E LED
RELATIVE SPECTRAL POWER DISTRIBUTION
High Density
High Density Color
Relative Spectral Power
high density cool & neutral white from Copy of 161017 XQE NW_CW Spectra Data.xlsx
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
5700 K, 70 CRI
4000 K, 75 CRI
3000 K, 80 CRI
Relative Spectral Power
high density
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
Royal Blue
Blue
Green
PC Amber
Red-Orange
Red
HE Photo Red
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
10
XLAMP® XQ-E LED
RELATIVE SPECTRAL POWER DISTRIBUTION - CONTINUED
High Intensity
High Intensity Color
Relative Spectral Power
high intensity cool & neutral white from Copy of 161017 XQE NW_CW Spectra Data.xlsx
PC Blue data from XQE-HI_Final_Datasheet - Add PC-Blue 180218.xlsx
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
5700 K, 70 CRI
4000 K, 75 CRI
3000 K, 80 CRI
Relative Spectral Power
high intensity
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
Royal Blue
Blue
PC Blue
Green
PC Amber
Red-Orange
Red
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
11
XLAMP® XQ-E LED
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF = 350mA)
High Density
High Density Color
Relative Flux Output vs. Junction Temperature
high density
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
White
Relative Flux Output vs. Junction Temperature
high density
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Radiant Flux
Junction Temperature (ºC)
Royal Blue
HE Photo Red
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
12
XLAMP® XQ-E LED
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF = 350mA) - CONTINUED
High Density Color
High Intensity
Relative Flux Output vs. Junction Temperature
high density
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
Blue
Green
PC Amber
Red-Orange
Red
Relative Flux Output vs. Junction Temperature
high intensity
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
White
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
13
XLAMP® XQ-E LED
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF = 350mA) - CONTINUED
High Intensity Color
High Intensity Color
Relative Flux Output vs. Junction Temperature
high intensity
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Radiant Flux
Junction Temperature (ºC)
Royal Blue
Relative Flux Output vs. Junction Temperature
high intensity
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
Blue
PC Blue
Green
PC Amber
Red-Orange
Red
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
14
XLAMP® XQ-E LED
ELECTRICAL CHARACTERISTICS (TJ = 85°C)
High Density
High Density Color
Electrical Characteristics (Tj = 85ºC)
high density
0
200
400
600
800
1000
1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70
Forward Current (mA)
Forward Voltage (V)
White
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
15
XLAMP® XQ-E LED
ELECTRICAL CHARACTERISTICS (TJ = 25°C) - CONTINUED
High Intensity
High Intensity Color
Electrical Characteristics (Tj = 85ºC)
high intensity
0
200
400
600
800
1000
1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70
Forward Current (mA)
Forward Voltage (V)
White
Electrical Characteristics (Tj = 85ºC)
high intensity
0
200
400
600
800
1000
1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70
Forward Current (mA)
Forward Voltage (V)
Royal Blue, Blue,
PC Blue
Green
PC Amber
Red-Orange, Red
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
16
XLAMP® XQ-E LED
RELATIVE FLUX VS. CURRENT (TJ = 85°C)
High Density
High Density Color
Relative Intensity vs. Current (Tj = 85ºC)
high density
0%
50%
100%
150%
200%
250%
0100 200 300 400 500 600 700 800 900 1000
Relative Luminous Flux
Forward Current (mA)
White
Relative Intensity vs. Current (Tj = 85ºC)
high density
0%
50%
100%
150%
200%
250%
300%
0100 200 300 400 500 600 700 800 900 1000
Relative Radiant Flux
Forward Current (mA)
Royal Blue
HE Photo Red
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
17
XLAMP® XQ-E LED
RELATIVE FLUX VS. CURRENT (TJ = 25°C) - CONTINUED
High Density Color
High Intensity
Relative Intensity vs. Current (Tj = 85ºC)
high density
0%
50%
100%
150%
200%
250%
300%
0100 200 300 400 500 600 700 800 900 1000
Relative Luminous Flux
Forward Current (mA)
Blue
Green
PC Amber
Red-Orange
Red
Relative Intensity vs. Current (Tj = 85ºC)
high intensity
0%
50%
100%
150%
200%
250%
0100 200 300 400 500 600 700 800 900 1000
Relative Luminous Flux
Forward Current (mA)
White
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
18
XLAMP® XQ-E LED
RELATIVE FLUX VS. CURRENT (TJ = 25°C) - CONTINUED
High Intensity Color
High Intensity Color
Relative Intensity vs. Current (Tj = 85ºC)
high intensity
0%
50%
100%
150%
200%
250%
0100 200 300 400 500 600 700 800 900 1000
Relative Radiant Flux
Forward Current (mA)
Royal Blue
Relative Intensity vs. Current (Tj = 85ºC)
high intensity
0%
50%
100%
150%
200%
250%
300%
0100 200 300 400 500 600 700 800 900 1000
Relative Luminous Flux
Forward Current (mA)
Blue, PC Blue
Green
PC Amber
Red-Orange
Red
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
19
XLAMP® XQ-E LED
TYPICAL SPATIAL DISTRIBUTION
High Density
High Density Color
Typical Spatial Radiation Pattern-white
high density
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
White
Typical Spatial Radiation Pattern-royal blue, blue, green, amber, red-orange, red
high density
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
Royal Blue, Blue,
Green
PC Amber
Red-Orange, Red, HE
Photo Red
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
20
XLAMP® XQ-E LED
TYPICAL SPATIAL DISTRIBUTION - CONTINUED
High Intensity
High Intensity Color
Typical Spatial Radiation Pattern-white
high intensity
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
White
Typical Spatial Radiation Pattern-royal blue, blue, green, amber, red-orange, red
high intensity
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
Royal Blue, Blue,
PC Blue, Green
PC Amber
Red-Orange, Red
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
21
XLAMP® XQ-E LED
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
High Density
White Royal Blue, Blue
Green PC Amber
Red-Orange, Red HE Photo Red
Thermal Design - white
high density & high intensity
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - royal blue, blue
high density & high intensity
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - PC amber
high density & high intensity
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Rj-a = 30°C/W
Thermal Design - green
high density
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Rj-a = 30°C/W
Thermal Design - HE photo red
high density
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - red-orange, red
high density & high intensity
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
22
XLAMP® XQ-E LED
THERMAL DESIGN - CONTINUED
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
High Intensity
White Royal Blue, Blue, PC Blue
Green PC Amber
Red-Orange, Red
Thermal Design - white
high density & high intensity
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - royal blue, blue
high density & high intensity
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - PC amber
high density & high intensity
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Rj-a = 30°C/W
Thermal Design - green
high intensity
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Rj-a = 30°C/W
Thermal Design - photo red
high density
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
23
XLAMP® XQ-E LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XQ-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used,
and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Profile Feature Lead-Free Solder
Average Ramp-Up Rate (Tsmax to Tp) 1.2°C/second
Preheat: Temperature Min (Tsmin) 120 °C
Preheat: Temperature Max (Tsmax) 170 °C
Preheat: Time (tsmin to tsmax) 65-150 seconds
Time Maintained Above: Temperature (TL) 217 °C
Time Maintained Above: Time (tL) 45-90 seconds
Peak/Classification Temperature (Tp) 235 - 245 °C
Time Within 5°C of Actual Peak Temperature (tp) 20-40 seconds
Ramp-Down Rate 1 - 6 °C/second
Time 25°C to Peak Temperature 4 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
IPC/JEDEC J-STD-020C
TP
TL
Temperature
Time
t 25˚C to Peak
Preheat
ts
tS
tP
25
Ramp-down
Ramp-up
Critical Zone
TL to TP
Tsmax
Tsmin
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
24
XLAMP® XQ-E LED
NOTES
Measurements
The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specifications.
Pre-Release Qualification Testing
Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Crees pre-release qualification testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Crees lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XQ-E LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the
original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
25
XLAMP® XQ-E LED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 1 enclosure consideration. The LED
package or a portion thereof has not been investigated as a fire enclosure or a fire and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
NOTES - CONTINUED
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
26
XLAMP® XQ-E LED
MECHANICAL DIMENSIONS
Thermal vias, if present, are not shown on these drawings.
All dimensions in mm.
Measurement tolerances unless indicated otherwise: ±.13 mm
High Density
XQEAWT-0x-xxxx-xxxxxxxxx
XQ-E High Density
High Intensity
XQEAWT-Hx-xxxx-xxxxxxxxx
XQ-E High Intensity
.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
.30
1.60
.65
1.60
.30
1.50
3.300
3.30
1.60
1.60
1.60
1.50
.60 .60
.30
R.936
.38
.44
1/145.000
D
2610-00035
XQE_XQA OUTLINE
--
--
7/19/13J. Nevins
----
7/19/13D. Seibel
REVISONS
REV DESCRIPTION BY DATE APP'D
A Initial Release DDS 7/19/13
B UPDATED OVERALL COMPONENT HEIGHT
DC 6/9/15
CADDED OPTICAL REF. DC 12/8/15YC
DCHANGED HEIGHT TO BLEND XQE/XQA TOGETHER
DC 12/17/15
SL
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWIDE NOTED
OPTICAL REFERENCE
SOLDER PAD
REFERENCE
OPTICAL REFERENCE
NOTCH IS ON
CATHODE(-) SIDE
Top View Side View Bottom View
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
.30
1.60
.65
1.60
.30
1.50
3.300
3.30
1.60
1.60
1.60
1.50
.60 .60
.30
R.936
.38
.44
1/145.000
D
2610-00035
XQE_XQA OUTLINE
--
--
7/19/13J. Nevins
----
7/19/13D. Seibel
REVISONS
REV DESCRIPTION BY DATE APP'D
A Initial Release DDS 7/19/13
B UPDATED OVERALL COMPONENT HEIGHT
DC 6/9/15
CADDED OPTICAL REF. DC 12/8/15YC
DCHANGED HEIGHT TO BLEND XQE/XQA TOGETHER
DC 12/17/15
SL
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWIDE NOTED
OPTICAL REFERENCE
SOLDER PAD
REFERENCE
OPTICAL REFERENCE
NOTCH IS ON
CATHODE(-) SIDE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
.30
1.60
.65
1.60
.30
1.50
3.300
3.30
1.60
1.60
1.60
1.50
.60 .60
.30
R.936
.38
.44
1/145.000
D
2610-00035
XQE_XQA OUTLINE
--
--
7/19/13J. Nevins
----
7/19/13D. Seibel
REVISONS
REV DESCRIPTION BY DATE APP'D
A Initial Release DDS 7/19/13
BUPDATED OVERALL COMPONENT HEIGHT
DC 6/9/15
CADDED OPTICAL REF. DC 12/8/15YC
DCHANGED HEIGHT TO BLEND XQE/XQA TOGETHER
DC 12/17/15
SL
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWIDE NOTED
OPTICAL REFERENCE
SOLDER PAD
REFERENCE
OPTICAL REFERENCE
NOTCH IS ON
CATHODE(-) SIDE
Optical Reference
Optical Reference
Notch is on
cathode (-)
side
Top View Side View Bottom View
Anode (+)
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
1.60
1.60
.80
±.10
.60
1.50
.30
1.50
.30
1.60
.65
1.60
.300
1.500
3.300
3.300
1/145.000
B
2610-00062
XQE Hi OUTLINE
--
--
----
----
5/19/15D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
B ADDED ANODE NOTE AND TEXT DC 8/6/15
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
DIMENSIONS ARE ± .13 UNLESS OTHERWISE NOTED
OPTICAL
REFERENCE
SOLDER PAD
REFERENCE
OPTICAL
REFERENCE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
1.60
1.60
.80
±.10
.60
1.50
.30
1.50
.30
1.60
.65
1.60
.300
1.500
3.300
3.300
1/145.000
B
2610-00062
XQE Hi OUTLINE
--
--
----
----
5/19/15D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
B ADDED ANODE NOTE AND TEXT DC 8/6/15
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
DIMENSIONS ARE ± .13 UNLESS OTHERWISE NOTED
OPTICAL
REFERENCE
SOLDER PAD
REFERENCE
OPTICAL
REFERENCE
Optical Reference
Optical
Reference
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
27
XLAMP® XQ-E LED
MECHANICAL DIMENSIONS - CONTINUED
High Density & High Intensity
Recommended Stencil Pad Recommended PC Board Solder Pad and Trace Layout
1.6
1.6 1.5
0.3
0.6
1.5
0.8
1.00
1.00
0.50
0.50
OPTICAL REFERENCE
OPTICAL REFERENCE
EXAMPLE
IDENTIFICATION
MARK
ANODE SIDE
1.5
0.3
3.3
3.3
1.6
0.65
0.45
0.50
1.20
1.45
1.6
1.6 1.5
0.3
0.6
1.5
0.8
1.00
1.00
0.50
0.50
OPTICAL REFERENCE
OPTICAL REFERENCE
EXAMPLE
IDENTIFICATION
MARK
ANODE SIDE
1.5
0.3
3.3
3.3
1.6
0.65
0.45
0.50
1.20
1.45
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
28
XLAMP® XQ-E LED
TAPE AND REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
Except as noted, all dimensions in mm [in].
Measurement tolerances unless indicated otherwise: .xx = ±.10 mm
High Density
XQEAWT-0x-xxxx-xxxxxxxxx
XQ-E High Density
High Intensity
XQEAWT-Hx-xxxx-xxxxxxxxx
XQ-E High Intensity
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
A
A
.30 ± .10
3.50 ±.10
1.85
1.65
1.750
8.000
NOMINAL
8.30
MAX
1.000
+.10
-.00
1.500
4.000
2.000
REVISONS
REV DESCRIPTION BY DATE APP'D
1/14.000
A
2402-00023
Carrier Tape, 1.7X1.7 XPQ
5/31/12D. CRONIN
Notes:
1. 10 sprocket hole pitch cumulative tolerance ± 0.2mm
REFERENCE VENDOR PART NUMBER 021142
CATHODE SIDE
ANODE SIDE
1.85 [.073]
Bo
.30 [.012]
T
3.0°
8.00 [.315]
NOMINAL
8.30 [.327]
MAX
W
6.25
[.246]
E2
Ø1.00
[.039]
D1
3.50 [.138] F
1.75 [.069]
E2
Ø1.50
+.10/-.00
[+.0039/-.0000]
4.00 [.157]
Po
2.00 [.079]
P2
4.00 [.157]
P1.98 [.078]
1.85 [.073]
Ao
3.0°
1.20 [.047]
Ko
POCKET SIZE
1.85 mm [.073”]
1.85 mm [.073”]
1.20 mm [.047”]
Ao
Bo
Ko
CATHODE SIDE
ANODE SIDE
1.85 [.073]
Bo
.30 [.012]
T
3.0°
8.00 [.315]
NOMINAL
8.30 [.327]
MAX
W
6.25
[.246]
E2
Ø1.00
[.039]
D1
3.50 [.138] F
1.75 [.069]
E2
Ø1.50
+.10/-.00
[+.0039/-.0000]
4.00 [.157]
Po
2.00 [.079]
P2
4.00 [.157]
P1.98 [.078]
1.85 [.073]
Ao
3.0°
1.20 [.047]
Ko
POCKET SIZE
1.85 mm [.073”]
1.85 mm [.073”]
1.20 mm [.047”]
Ao
Bo
Ko
CATHODE SIDE
ANODE SIDE
1.85 [.073]
Bo
.30 [.012]
T
3.0°
8.00 [.315]
NOMINAL
8.30 [.327]
MAX
W
6.25
[.246]
E2
Ø1.00
[.039]
D1
3.50 [.138] F
1.75 [.069]
E2
Ø1.50
+.10/-.00
[+.0039/-.0000]
4.00 [.157]
Po
2.00 [.079]
P2
4.00 [.157]
P1.98 [.078]
1.85 [.073]
Ao
3.0°
1.20 [.047]
Ko
POCKET SIZE
1.85 mm [.073”]
1.85 mm [.073”]
1.20 mm [.047”]
Ao
Bo
Ko
CATHODE SIDE
ANODE SIDE
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
29
XLAMP® XQ-E LED
TAPE AND REEL - CONTINUED
High Density & High Intensity
Loaded Pockets
(XQ-E High Density - 2,000 Lamps
XQ-E High Intensity - 3,000 Lamps)
Leader
400 mm (min) of
empty pockets with
at least 100 mm
sealed by tape
(50 empty pockets min.)
Trailer
160 mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
START
END
13
mm
7"
Cover Tape
Pocket Tape
User Feed Direction
User Feed Direction
Copyright © 2013-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
30
XLAMP® XQ-E LED
PACKAGING
The diagrams below show the packaging and labels Cree uses to ship XLamp XQ-E LEDs. XLamp XQ-E LEDs are shipped in tape loaded
on a reel. Each box contains only one reel in a moisture barrier bag.
Patent Label
(on bottom of box)
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel
CREE Bin Code
& Barcode Label
Vacuum-Sealed
Moisture Barrier Bag
Label with Customer
P/N, Qty, Lot #, PO #
Label with Cree Bin
Code, Qty, Lot #
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #

Products

LED XLAMP XQ-E PC AMBER SMD
Available Quantity0
Unit Price1.77504
LED XLAMP XQ-E 2700K WHITE SMD
Available Quantity0
Unit Price1.24252
LED XLAMP XQ-E 535NM GREEN SMD
Available Quantity0
Unit Price1.75288
LED XLAMP XQ-E 615NM RED/ORN SMD
Available Quantity0
Unit Price1.70848
LED XLAMP XQ-E 2700K WHITE SMD
Available Quantity0
Unit Price1.1094
LED XLAMP XQ-E COOL WHITE 5000K
Available Quantity0
Unit Price1.1094
LED XLAMP XQ-E WARM WHITE 3000K
Available Quantity0
Unit Price1.26468
LED XLAMP XQ-E WARM WHITE 3750K
Available Quantity0
Unit Price0.90418
LED XLAMP GREEN 520NM 1616 SMD
Available Quantity0
Unit Price1.3778
LED XLAMP XQ-E 460NM ROY BLU SMD
Available Quantity0
Unit Price1.0477
LED XLAMP GREEN 520NM 1616 SMD
Available Quantity0
Unit Price1.75288
LED XLAMP XQ-E NEUTRAL WHT 4000K
Available Quantity0
Unit Price0.86112
LED XLAMP WARM WHITE 3500K 0606
Available Quantity0
Unit Price0.87547
LED XLAMP NEUTRAL WHT 4250K 0606
Available Quantity0
Unit Price0.86113
LED XLAMP COOL WHITE 5000K 0606
Available Quantity0
Unit Price0.76066
LED XLAMP COOL WHITE 6200K 0606
Available Quantity0
Unit Price0.86113
LED XLAMP XQE BLUE 475NM 0606
Available Quantity0
Unit Price2.06999
LED XLAMP WARM WHITE 3250K 0606
Available Quantity0
Unit Price0.86113
LED XLAMP XQE BLUE 475NM 0606
Available Quantity0
Unit Price2.27
LED XLAMP GREEN 528NM SMD
Available Quantity0
Unit Price1.72225