Kycon's modular jacks with integrated magnetics help designers with space and cost savings while improving electrical performance.
MEC Switches' Multimec™ 10C caps have a diameter of 19.2 mm and a slightly concave surface for good ergonomic feel.
Learn all about IQD crystals and frequency products with speaker Neil Floodgate in this one-hour training. Digi-Key Electronics is the exclusive sponsor of the Wurth Electronics technical WEbinar Series.
The Apollo3 Blue offers advanced features including six configurable I2C and SPI masters, two UARTs, one I2C and SPI slave, a 15-channel 14-bit ADC, and a dedicated Bluetooth processor that supports BLE5.
Bourns’ MF-GSMF series polymer PTC resettable fuses have a higher voltage (36 VDC) and hold current (3.0 A) ratings with initial resistance as low as 0.01 ohm.
Diodes’ PI3A6386 switch includes a dual, single-pole-double-throw (SPDT) switch for high-speed USB signal and high-quality audio signal.
Wurth Electronics’ WE-RJ45 series RJ45 connectors with THT pins for wave and reflow soldering are compatible with most ICs for Ethernet applications.
FreeWave Technologies' ZIQ-P/-PE ZumIQ™ industrial IoT edge computers are ideal for remote edge environments where infrastructure is limited.
JAE’s 12G-SDI coaxial connector has a common PCB footprint that is recommended for both straight and angle connectors.
Bel Magnetic Solutions' 1GBase-T ganged MagJack® ICM is ideal for applications such as high-powered devices and high power sourcing applications.
TDK-Lambda's CUS100ME 2" x 4” Class I and Class II series is certified for both medical and industrial use.
Orion Fans’ waterproof harsh environment EC and DC fans protect against dust, moisture, salt fog, salt spray, temperature changes, and humidity.
FreeWave Technologies' ZumLink™ Z9-T/-C industrial-grade radio modules offer wireless data transfer, command, and control capabilities at a CSWaP advantage.
FreeWave Technologies' ZumLink™ Z9-P/-PE IIoT gateways offer secure data collection, transport, and control in rugged industrial environments.
Littelfuse's SP3400 integrates two channels of low capacitance steering diodes to protect electronic equipment.
Wurth Electronics, in partnership with Texas Instruments, developed a 10 kW 3-level, 3-phase grid tie inverter reference design for solar string inverters.
Microchip's SAM L10 and SAM L11 Arm® Cortex®-M23 MCUs offer some of the lowest power consumption in the industry and have capacitive touch capability.Publish Date: 2018-06-26 Updated: 2019-06-14
FreeWave Technologies' ZumLink™ Z9-PC/-SR001 board-level IoT gateways offer secure data collection, transport, and control in rugged industrial environments.
FreeWave Technologies' MM2 series 900 MHz RF modules offer wireless data transfer, command, and control capabilities at a CSWaP advantage in a compact package.
Monolithic Power Systems' MPM3570E step-down power module is ideal for applications such as industrial supplies and automotive systems.
Orion Fans’ ATEX-certified fans are designed for harsh AC applications involving explosive atmospheres or flammable gases.
Cypress' EZ-PD BCR is a highly-integrated USB Type-C™ port controller targeting devices that have legacy barrel connectors or USB micro-B connectors.
Infineon’s SP4T RF switch with MIPI 2.0 is a perfect solution for multimode handsets based on LTE and WCDMA.
This week on Maker Update, a robot with a staring problem, the end of Maker Media, holding rainbows, a robot dating simulator, DaVinci machines, a Pi movie tracker, and surface mount soldering with sand.
TPSMB series transient voltage suppression (TVS) diode from Littelfuse provides secondary protection of sensitive automotive and other electronics from transients induced by load dump and other transient voltage events.
Tensility low smoke, zero halogen (LSZH) XLPE cable assemblies and wires are chemically resistant products rated to 105°C.
The always-on buzz of retail systems means that any technical glitch can cause lost revenue, lost inventory, and maybe lost customers.
Microchip’s MCP331 analog-to-digital converters (ADCs) feature full differential input, high-performance, and low power consumption in a small package.
Khadas' VIM2 SBC is a powerful credit-card sized single board computer that comes with a variety of case options.
In many ways, machine-to-machine communications was born on the factory floor.
Molex works closely with Digi-Key to provide you with a complete sensing solution from one convenient location.
The VIM1 is the original Amlogic S905X Arm® development board designed by Khadas for hobbyists, makers, and electronic fans.
Panasonic's AQY217GS series PhotoMOS® relays are ideal for applications such as measurement instruments, industrial equipment, and security equipment.
EPC's GaN automotive enhancement mode power transistors take full advantage of the improved efficiency, speed, smaller size, and lower cost of eGaN® devices.
Renesas’ RL78 reference design indicates human absence/presence using an infrared sensor to turn an LED on and off automatically.
The Broadcom ACNT optocouplers family offers 15 mm creepage and 14.2 mm clearance for high voltage isolation applications.
Digi IoT connectivity is ideal for energy operations that are widespread, complex, and often hazardous—the essence of mission-critical.
Phyton’s CPI2-B1 gang programmer can be used for programming microcontrollers, Flash memory, and programmable logic devices.
Since you can’t trail miles of Ethernet cable behind every train and truck, wireless connectivity is essential for operating transportation fleets.
Using the Arduino Platform and basic coding, we can show how it possible to store data on a EEPROM memory chip with the parallel bus interface.
PUI Audio's ASE02506MS-LW90-DSM-R Dynamic Speaker Management (DSM™)-ready speaker increases loudness (SPL) and bass response safety.
Rugged flexibility and compatibility with FR4 boards make these mica chip capacitors ideally suited for use where other multilayer capacitors aren’t recommended because of cracking—these capacitors exceed a 2 millimeter bend test.
Developers can get started with real-time operating systems (RTOSs) for the IoT using readily available microcontroller platforms.
Laird Connectivity’s Sentrius™ IG60 wireless IoT gateway connects Bluetooth® sensors and legacy serial equipment to the Cloud.
Digi-Key Electronics, a global electronic components distributor, was honored with the Panduit 2018 Highest Sales Growth & 5 Years Consecutive Growth awards at the 2019 EDS Leadership Summit in Las Vegas, Nev.
Conta-Clip’s KDS click cable entry system makes complex cable management simple with its flexible modular approach to cable entries.
Linear Technology's LT®8316 is a micropower, high-voltage flyback controller that requires no opto-isolator for regulation.
Molex's 0.25 mm FPC easy-on connectors come in a range of sizes and styles to accommodate other PCB components and add space savings.
Analog Devices' ADN4654 and ADN4655 signal-isolated, low-voltage differential signaling (LVDS) buffers operate at up to 1.1 Gbps with low jitter.
GSS' ExplorIR-W is a robust, low power CO2 sensor with analog (voltage) output and is built to reliably measure CO2 levels in harsh environments.
EPC's application note on eGaN® FET power conversion.
Gas Sensing Solutions' SprintIR-W is a high-speed CO2 sensor that measures 0 to 20% CO2 concentration and comes with an optional flow-through adapter.
Würth Elektronik's featured components for their USB Type-C™ development kit.
The high-quality FIPSYSTEMS® protection products meet the stringent requirements of railway technology: they are mechanically strong, durably weather-resistant and have optimum fire protection properties.
While different IP protection classes used to require different connections for corrugated conduits, FIPLOCK ONE now combines all protection class requirements for industrial applications, even under demanding environmental conditions.
This video shows how you can check the SLF3x sensor’s accuracy in a quick and easy way. A setup with a syringe, the SLF3x sensor, a glass, a balance and the Sensirion Viewer Software is used to demonstrate this.
With a Particle Photon you can easily control a NeoPixel String with only three wires.
Digi-Key Electronics, a global electronic components distributor, was honored with the Panasonic 2018 e-Commerce Distributor of the Year award at the 2019 EDS Leadership Summit in Las Vegas, Nev.
Molex’s 1mm connectors offer the best combination of signal reliability, compactness, wide circuit-size range, height, and cable style choices in the market.
We announced that Cypress will join with Infineon Technologies AG, uniting two premier semiconductor companies to create a strong technology leader that will deliver best-in-class power, MCU, specialty memory and secure connectivity solutions across numerous growth segments.
Waterproof USB Type-C™ interconnects support USB 3.1 and feature different internal sealing methods to achieve a reliable IPX7 or higher ingress protection rating.Duration: 5 minutes
Molex's 0.35 mm pitch, 0.60 mm height board-to-board connectors offer maximum space savings for tight-packaging applications.
The Trion™ T8 BGA81 development kit from Efinix is based on the T8 FPGA so that customers can explore the features of this first member of the Trion platform.
This presentation will introduce the different types of terminal blocks, features, and accessories for the terminal blocks.Duration: 10 minutes
Analog Devices' ADuM4122 isolated, single gate drivers are ideal for applications such as industrial inverters and switching power supplies.
Diodes’ AP43770 is a USB Type-C™ power delivery PD3.0 PPS decoder dedicated to power source applications with legacy capability.
This document describes a Renesas microcontroller RL78/G1F application for the handy vacuum cleaner.
GSS' ExplorIR®-M robust, low power, CO2 sensor allows for easy integration into gas monitoring and detection systems.
Molex 0.30 mm pitch narrow-depth FPC connectors provide an optimal blend of space savings, contact retention, and ease-of-use for tight-packaging applications.
Molex 0.50 mm pitch narrow-depth FPC connectors provide an optimal blend of space savings, contact retention, and ease-of-use for tight-packaging applications.
Analog Devices' ADuCM355 precision analog MCUs are ideal for applications such as air, water, and soil environmental sensing.
The Efinix Trion™ T8 FPGA features Quantum™ fabric wrapped with an I/O interface and has less than 150 µA typical core leakage current at 1.1 V.
The T4 FPGA features the high-density, low-power Efinix Quantum™ fabric wrapped with an I/O interface in a small footprint package for easy integration.
This document describes a Renesas microcontroller RL78/G10 application for an infrared human sensor.
This presentation will take a look at what a buried shielding layer is, why it is important, and what makes Protektive Pak the best choice for ESD Control Packaging.Duration: 5 minutes
Use a smart sensor with an integrated machine learning core to detect complex movement sequences for low-power, always-on motion tracking.
TDK has recognized Digi-Key Electronics Europe with their European Distribution Award 2018 in Gold in the high-service distribution category during the annual TDK European Award Dinner.
Molex's SlimStack 0.50 mm pitch high-speed board-to-board connectors offer a variety of circuit sizes and stack heights for space-saving and design flexibility.
Is it the end of an era or the start to new beginnings?
Matt has a couple new and exciting products from ReVibe Energy and RF Beam Microwave this time on New Product Discoveries.
The Bourns GMOV hybrid overvoltage protection component combines a metal oxide varistor (MOV) and a gas discharge tube (GDT) with patented space-saving FLAT® technology.
Introduction to the NXF1 series of 1 W, surface mount, single-output, regulated DC/DC converters with 3 kVDC isolation.Duration: 5 minutes
Digi-Key Electronics, a global electronic components distributor, was honored with the HARTING 2019 New Customer Growth Award at the 2019 EDS Leadership Summit in Las Vegas, Nev.
Alpha Wire’s cable, wire, tubing and additional accessories feature the high reliability and performance needed in the medical industry for a variety of devices.
TE offers connectivity solutions for a variety of markets including lighting, data, circuit protection, rugged, industrial control, and many more.Publish Date: 2019-06-10
Bluetooth is a short-range wireless standard for the interconnection of mobile phones, computers, and other electronic devices.
IDEC’s PN1L series stainless steel pushbutton piezo switches have an easy to clean metal surface and no moving parts making them ideal for commercial kitchens.
GigaDevice's GD25WD SPI NOR Flash memory offers ultra-low power and zero deep power-down current.
Hirose's ix Industrial™ connector high-speed transmission design contributes to equipment evolution and smart manufacturing applications.
Silicon Carbide (SiC) devices have the potential to revolutionize today’s power electronics; featuring fast switching times, high blocking voltage capabilities & the ability to operate at high temperatures.
Excelitas’ C30954EH, C30955EH, and C30956EH are general purpose silicon avalanche photodiodes made using a double-diffused "reach through" structure.
KOA's SR731E-RT current sense resistors are ideal for use in outdoor environment applications in mining, agriculture, winemaking, and oil/gas.
Molex's 0.80 mm slimstack board-to-board connectors deliver design flexibility while meeting tight-packaging needs.
SST Sensing zirconia oxygen sensors' sensing technology and stainless steel construction make them ideal for use in harsh environments.
Littelfuse's LSIC2SD065 series support reductions in switching losses and increases in the efficiency and robustness of a power electronics system.
Molex’s 1.50 mm Pico-Lock™ wire-to-board connector system is ideal for applications requiring ultra-low profile, high current, and secure locking.
Panasonic's BK1100FHU high temperature, long life type nickel-metal hydride cell features space and weight savings versus valve-regulated lead-acid products.
Connector series DF22 from Hirose, are a rugged, high-current connector used for power supply connection applications.