Selected Filters
|
Supplier: Bel Power Solutions
Subtitle:
1W Single Output DC to DC Converters
Description:
The DSP1 series is specifically designed to convert a nominal 5 volt input into an isolated output voltage. The semi regulated output voltages were designed to allow analog circuits and three terminal regulators to operate within their most efficient input voltage range. This series achieves high...
Category: Power, Circuit Protection - Power Supplies - DC to DC Converters - Board Mount - mW to 1W |
|
Supplier: Bel Power Solutions
Subtitle:
6W, Isolated, Single Output DC to DC Converters
Description:
Designed for digital, ECL, and analog application, the DFC6 Series will provide up to 6 watts in an industry standard package. Ultra-wide input voltage range allows operation from battery power as well as system power. The output is electrically isolated, thereby allowing the output to be configu...
Category: Power, Circuit Protection - Power Supplies - DC to DC Converters - Board Mount - 4W to 6W |
|
Supplier: Bel Power Solutions
Subtitle:
35W, DC to DC Converter, Isolated Module
Description:
The IMX4 Series of board-mountable, 4-watt DC to DC converters has been designed according to the latest industry requirements and standards. The converters are particularly suitable for use in mobile or stationary applications in transport, industry, or telecom, where variable input voltages or ...
Category: Power, Circuit Protection - Power Supplies - DC to DC Converters - Board Mount - 4W to 6W |
|
Supplier: Bel Power Solutions
Subtitle:
10W, Isolated, Single Output DC to DC Converters
Description:
The DFC10 series provides power converter solutions to meet commercial and industrial requirements. With power densities above 11 watts per cubic inch, overcurrent protection, and five sided shielded case, the DFC10 meets the most rigorous needs in an industry standard case size. The 220 kHz oper...
Category: Power, Circuit Protection - Power Supplies - DC to DC Converters - Board Mount - 7W to 10W |
![]() |
Supplier: Bel Power Solutions
Subtitle:
7W, Isolated, DC to DC Converters
Description:
The IMX Series of rugged DC to DC converters offer a magnetic feedback along with input and output protection and 1200 VDC isolation.
Category: Power, Circuit Protection - Power Supplies - DC to DC Converters - Board Mount - 7W to 10W |
|
Supplier: Bel Power Solutions
Subtitle:
15W, DC to DC Converter, Isolated Module
Description:
The IMX15 Series of board mountable 15 Watt DC to DC converters have been designed according to the latest industry requirements and standards.
Category: Power, Circuit Protection - Power Supplies - DC to DC Converters - Board Mount - 15W to 18W |
![]() |
Supplier: Bel Power Solutions
Subtitle:
Non-Isolated DC to DC Converters
Description:
The Bel SRPE-03E1A0 is part of the non-isolated DC to DC converter power module series. The modules use a SMD package.
Category: Power, Circuit Protection - Power Supplies - DC to DC Converters - Board Mount - 15W to 18W |
![]() |
Supplier: Bel Power Solutions
Subtitle:
30W Non Isolated DC to DC Converters
Description:
The 0RQB-30Y05L is an isolated DC to DC converter providing 30 W of output power from a wide input range (24 V, 48 V, 72 V, 96 V, 110 V typical). Standard features include remote on/off, input under-voltage protection, output over-voltage protection, over current and short circuit protection.
Category: Power, Circuit Protection - Power Supplies - DC to DC Converters - Board Mount - 26W to 30W |
|
Supplier: Bel Power Solutions
Subtitle:
28W, Digital Point of Loads (dPOLs), 2nd Generation Digital Power
Description:
Bel Power Solutions’s digital point-of-load (POL) converters are recommended for use with regulated bus converters in an Intermediate Bus Architecture (IBA). The Digital POL Series is a line of intelligent, fully programmable step-down point-of-load DC to DC modules integrating digital power con...
Category: Power, Circuit Protection - Power Supplies - DC to DC Converters - Board Mount - 26W to 30W |
![]() |
Supplier: Bel Power Solutions
Subtitle:
30W Non-Isolated DC to DC Converters
Description:
The SRBH-06H1A1 is part of the low cost non-isolated DC to DC power converter series providing up to 6A output current. The output is closely regulated and the efficiency of 3.3VDC output is typically 89% at full load.
Category: Power, Circuit Protection - Power Supplies - DC to DC Converters - Board Mount - 26W to 30W |